开云体育

PMDX-411 SmartBOB-USB for Mach4 now available inside a DB-25 shell

Steve Stallings All Messages By This Member #146013 New product! The PMDX-411 squeezes a SmartBOB-USB inside the connector shell of a male DB-25 plug. Now you can instantly convert most parallel port devices into a USB device controlled by Mach4. The PMDX-411 is available now and costs $119 by itself or $309 in a bundle with Mach4Hobby. See details here:
Art All Messages By This Member #146014 ? Now thats a smart idea.... :) ? ? Thanks, Art ? ? ? ? toggle quoted message Show quoted text ----- Original Message ----- From: stevesng@... [mach1mach2cnc] To: mach1mach2cnc@... Sent: Thursday, February 26, 2015 7:58 PM Subject: [mach1mach2cnc] PMDX-411 SmartBOB-USB for Mach4 now available inside a DB-25 shell ? New product! The PMDX-411 squeezes a SmartBOB-USB inside the connector shell of a male DB-25 plug. Now you can instantly convert most parallel port devices into a USB device controlled by Mach4. The PMDX-411 is available now and costs $119 by itself or $309 in a bundle with Mach4Hobby. See details here:
[email protected] #146015 Any problems with the USB dropping out due to electrical interference? Dan Mauch Camtronics CNC
tesla_turbine All Messages By This Member #146016 What about two port system? Peter
Steve Stallings All Messages By This Member #146020 You will have to stay tuned for the results on that one..... We did use different USB inteface silicon (not FTDI) than is in the SmoothStepper-USB and provided ESD protection and common-mode noise filtering, but it is too soon to claim victory. So far we have no reports of problems, but there are less than 100 units in the field. ---In mach1mach2cnc@..., <dmauch@...> wrote : Any problems with the USB dropping out due to electrical interference? Dan Mauch Camtronics CNC
Webcast #146021 Hi, will it work with mach3? Sent from On Feb 27, 2015, at 2:59pm, "stevesng@... [mach1mach2cnc]" <mach1mach2cnc@...> wrote: toggle quoted message Show quoted text ? You will have to stay tuned for the results on that one..... We did use different USB inteface silicon (not FTDI) than is in the SmoothStepper-USB and provided ESD protection and common-mode noise filtering, but it is too soon to claim victory. So far we have no reports of problems, but there are less than 100 units in the field. ---In mach1mach2cnc@..., wrote : Any problems with the USB dropping out due to electrical interference? Dan Mauch Camtronics CNC
DDW All Messages By This Member #146022 Will it work with Mach3? toggle quoted message Show quoted text On Fri, Feb 27, 2015 at 2:46 PM, Webcast waxcast@... [mach1mach2cnc] <mach1mach2cnc@...> wrote: ? Hi, will it work with mach3? Sent from On Feb 27, 2015, at 2:59pm, "stevesng@... [mach1mach2cnc]" <mach1mach2cnc@...> wrote: ? You will have to stay tuned for the results on that one..... We did use different USB inteface silicon (not FTDI) than is in the SmoothStepper-USB and provided ESD protection and common-mode noise filtering, but it is too soon to claim victory. So far we have no reports of problems, but there are less than 100 units in the field. ---In mach1mach2cnc@..., wrote : Any problems with the USB dropping out due to electrical interference? Dan Mauch Camtronics CNC
Webcast #146023 Hi, does The PMDX-411 work with any versions of mach3? Sent from On Feb 27, 2015, at 2:59pm, "stevesng@... [mach1mach2cnc]" <mach1mach2cnc@...> wrote: toggle quoted message Show quoted text ? You will have to stay tuned for the results on that one..... We did use different USB inteface silicon (not FTDI) than is in the SmoothStepper-USB and provided ESD protection and common-mode noise filtering, but it is too soon to claim victory. So far we have no reports of problems, but there are less than 100 units in the field. ---In mach1mach2cnc@..., wrote : Any problems with the USB dropping out due to electrical interference? Dan Mauch Camtronics CNC
Steve Stallings All Messages By This Member #146024 As the product announcement said, the PMDX-411 is for use with Mach4. We have several more projects related to Mach4 in process and will not have time to consider support for Mach3 until late fall, if then. We will have to see what happens.
Webcast #146025 Thank you. Sent from On Feb 27, 2015, at 4:36pm, "stevesng@... [mach1mach2cnc]" <mach1mach2cnc@...> wrote: toggle quoted message Show quoted text ? As the product announcement said, the PMDX-411 is for use with Mach4. We have several more projects related to Mach4 in process and will not have time to consider support for Mach3 until late fall, if then. We will have to see what happens.

Previous Topic Next Topic