开云体育

Mach3 Tool Setter macro

Dan Mauch All Messages By This Member #155008 ?For some probably dumb reason in my HiddenScriptm1s file i can't get it to raise the Z axis after contact with the tool setter probe. I have the correct G code and the correct setting of Z .5? to it should raise buy instead lowers . Anybody have a good working copy of hiddenscript? Dan Mauch
Dan Mauch All Messages By This Member #155011 Disregard my post. I figured out what the problem was and solved it. Dan
o1bigtenor All Messages By This Member #155036 On Thu, Oct 21, 2021 at 6:14 PM Dan Mauch <dmauch@...> wrote: Disregard my post. I figured out what the problem was and solved it. Dan For anyone else running into the same issue - - -please? What was the issue and how did you solve it? TIA?
Dan Mauch All Messages By This Member #155045 开云体育 My tool setter probe is .781” tall. Without? thinking, I changed the Z retract height from 1” to .5 “. ?That was the problem I created. The answer is that the retract height must be greater than the thickness of the probe. Once I changed it back to 1” it then worked correctly. Dan Mauch Dan ? toggle quoted message Show quoted text From: [email protected] [mailto:[email protected]] On Behalf Of o1bigtenor Sent: Friday, October 22, 2021 3:59 AM To: [email protected] Subject: Re: [MachCNC] Mach3 Tool Setter macro ? ? ? On Thu, Oct 21, 2021 at 6:14 PM Dan Mauch <dmauch@...> wrote: Disregard my post. I figured out what the problem was and solved it. Dan ? For anyone else running into the same issue - - -please? ? What was the issue and how did you solve it? ? TIA?

Previous Topic Next Topic