|
I have now added switches so I can HOME and SQUARE the X axis. I have a question about how this should work.
Here is what I get when I hit "REF ALL HOME"
The X axis moves in the - direction ?(AS EXPECTED) When the Home Switches are hit each motor ("X" and "A") back OFF the switches?(AS EXPECTED) Then the "A" axis motor moves back to the switch and triggers it a second time and again it backs OFF and stops. (NOT SURE THIS IS CORRECT OR NOT)
Is there something I am missing?
Thanks, Troy
?
|
Uncheck "Home Slave with Master" in General Config, and edit your homing script to remove the command that's homing the A axis.
From: "testfly@... [mach1mach2cnc]" To: mach1mach2cnc@... Sent: Wednesday, February 18, 2015 2:30:04 PM Subject: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
I have now added switches so I can HOME and SQUARE the X axis. I have a question about how this should work.
Here is what I get when I hit "REF ALL HOME"
The X axis moves in the - direction ?(AS EXPECTED) When the Home Switches are hit each motor ("X" and "A") back OFF the switches?(AS EXPECTED) Then the "A" axis motor moves back to the switch and triggers it a second time and again it backs OFF and stops. (NOT SURE THIS IS CORRECT OR NOT)
Is there something I am missing?
Thanks, Troy
?
|
Thanks! ? I did not have a check in the ?"Home Slave with Master" So I checked that box to see what happened and That seems to have solved my problem. ? Also I did not find the ?homing script to remove the command that's homing the A axis. But, I think I am OK now. ? Thanks for the quick response. ? Regards, Troy ?
toggle quoted message
Show quoted text
From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 2:42 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE? ? Uncheck "Home Slave with Master" in General Config, and edit your homing script to remove the command that's homing the A axis.
From: "testfly@... [mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015 2:30:04 PM
Subject: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE ? I have now added switches so I can HOME and SQUARE the X axis. I have a question about how this should work. ? Here is what I get when I hit "REF ALL HOME" ? The X axis moves in the - direction ?(AS EXPECTED) When the Home Switches are hit each motor ("X" and "A") back OFF the switches?(AS EXPECTED) Then the "A" axis motor moves back to the switch and triggers it a second time and again it backs OFF and stops. (NOT SURE THIS IS CORRECT OR NOT)
Is there something I am missing? ? Thanks, Troy ? ? ?
|
If home slave with master is checked, then the A axis is not using it's home switch, and no autosquaring will occur. To edit the homing macro, go to Operator > Edit button script, and click the home button.
From: "testfly@... [mach1mach2cnc]" <mach1mach2cnc@...> To: mach1mach2cnc@... Sent: Wednesday, February 18, 2015 3:42:44 PM Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
Thanks! ? I did not have a check in the ?"Home Slave with Master" So I checked that box to see what happened and That seems to have solved my problem. ? Also I did not find the ?homing script to remove the command that's homing the A axis. But, I think I am OK now. ? Thanks for the quick response. ? Regards, Troy ? From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 2:42 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE ? ? Uncheck "Home Slave with Master" in General Config, and edit your homing script to remove the command that's homing the A axis.
From: "testfly@... [mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015 2:30:04 PM
Subject: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE ? I have now added switches so I can HOME and SQUARE the X axis. I have a question about how this should work. ? Here is what I get when I hit "REF ALL HOME" ? The X axis moves in the - direction ?(AS EXPECTED) When the Home Switches are hit each motor ("X" and "A") back OFF the switches?(AS EXPECTED) Then the "A" axis motor moves back to the switch and triggers it a second time and again it backs OFF and stops. (NOT SURE THIS IS CORRECT OR NOT)
Is there something I am missing? ? Thanks, Troy ? ? ?
|
OK I understand. ? So, I removed the check and I removed the last line in the script which was ?"DoButton( 25 )" . ? It seems to be working right. ? Anything else I should take a look at? ? Thanks again for the help. ? Regards, Troy ? ?
toggle quoted message
Show quoted text
From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 3:46 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE? ? If home slave with master is checked, then the A axis is not using it's home switch, and no autosquaring will occur. To edit the homing macro, go to Operator > Edit button script, and click the home button.
From: "testfly@... [mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015 3:42:44 PM
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE ? Thanks! ? I did not have a check in the ?"Home Slave with Master" So I checked that box to see what happened and That seems to have solved my problem. ? Also I did not find the ?homing script to remove the command that's homing the A axis. But, I think I am OK now. &n bsp; Thanks for the quick response. ? Regards, Troy ? ? ? Uncheck "Home Slave with Master" in General Config, and edit your homing script to remove the command that's homing the A axis.
From: "testfly@... [mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015 2:30:04 PM
Subject: [mach1mach2cn c] Homing with "X" axis with "A" motor as the SLAVE ? I have now added switches so I can HOME and SQUARE the X axis. I have a question about how this should work. ? Here is what I get when I hit "REF ALL HOME" ? The X axis moves in the - direction ?(AS EXPECTED) When the Home Switches are hit each motor ("X" and "A") back OFF the switches?(AS EXPECTED) Then the "A" axis motor moves back to the switch and triggers it a second time and agai n it backs OFF and stops. (NOT SURE THIS IS CORRECT OR NOT) ? Is there something I am missing? ? Thanks, Troy ? ? ? ?
|
One more HOMING question. ? I can set how far off the switch the Axis are after Homing. However, A closer look and all I am really doing is setting the "Machine DRO" to read a value. In fact the axis backs OFF the same amount and the Machine DRO gets set to the value I have entered. ? Is this correct or am I missing something? ? The reason I ask is because I would like the axis to back OFF the switch .350 and I can't figure out how to get the axis to move off just a little more after hitting the switch when HOMING. It moves OFF enough to un-trigger the switches. But I would like it to back OFF just a bit more. ? ? Thanks, Troy ? ? ? ?
toggle quoted message
Show quoted text
From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 4:15 PM
To: mach1mach2cnc@...
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE? ? OK I understand. ? So, I removed the check and I removed the last line in the script which was ?"DoButton( 25 )" . ? It seems to be working right. ? Anything else I should take a look at? ? Thanks again for the help. ? Regards, Troy ? ? ? ? If home slave with master is checked, then the A axis is not using it's home switch, and no autosquaring will occur. To edit the homing macro, go to Operator > Edit button script, and click the home button.
From: "testfly@... [mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015 3:42:44 PM
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE ? Thanks! ? I did not have a check in the ?"Home Slave with Master" So I checked that box to see what happened and That seems to have solved my problem. ? Also I did not find the ?homing script to remove the command that's homing the A axis. But, I think I am OK now. &n bsp; Thanks for the quick response. ? Regards, Troy ? ? ? Uncheck "Home Slave with Master" in General Config, and edit your homing script to remove the command that's homing the A axis.
From: "testfly@... [mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015 2:30:04 PM
Subject: [mach1mach2cn c] Homing with "X" axis with "A" motor as the SLAVE ? I have now added switches so I can HOME and SQUARE the X axis. I have a question about how this should work. ? Here is what I get when I hit "REF ALL HOME" ? The X axis moves in the - direction ?(AS EXPECTED) When the Home Switches are hit each motor ("X" and "A") back OFF the switches?(AS EXPECTED) Then the "A" axis motor moves back to the switch and triggers it a second time and agai n it backs OFF and stops. (NOT SURE THIS IS CORRECT OR NOT) ? Is there something I am missing? ? Thanks, Troy ? ? ? ?
|
You are correct-the number you enter is to
tell the machine what value the axis should be set to after homing.
?
From:
mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015
6:20 PM
To: mach1mach2cnc@...
Subject: RE: [mach1mach2cnc]
Homing with "X" axis with "A" motor as the SLAVE
?
?
One more HOMING question.
?
I can set how far off the switch the Axis are after Homing.
However, A closer look and all I am really doing is setting the
"Machine DRO" to read a value.
In fact the axis backs OFF the same amount and the Machine DRO
gets set to the value I have entered.
?
Is this correct or am I missing something?
?
The reason I ask is because I would like the axis to back OFF
the switch .350 and I can't figure out how to get the axis to move off just a
little more after hitting the switch when HOMING.
It moves OFF enough to un-trigger the switches. But I would like
it to back OFF just a bit more.
?
?
Thanks,
Troy
?
?
?
?
toggle quoted message
Show quoted text
From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015
4:15 PM
To: mach1mach2cnc@...
Subject: RE: [mach1mach2cnc]
Homing with "X" axis with "A" motor as the SLAVE
?
?
OK I understand.
?
So, I removed the check and I removed the last line in the
script which was ?"DoButton( 25 )" .
?
It seems to be working right.
?
Anything else I should take a look at?
?
Thanks again for the help.
?
Regards,
Troy
?
?
?
?
If home slave with master is checked, then the A axis is not using
it's home switch, and no autosquaring will occur. To edit the homing macro, go
to Operator > Edit button script, and click the home button.
From: "testfly@...
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
3:42:44 PM
Subject: RE: [mach1mach2cnc]
Homing with "X" axis with "A" motor as the SLAVE
?
Thanks!
?
I did not have a check in the ?"Home Slave with Master"
So I checked that box to see what happened and That seems to
have solved my problem.
?
Also I did not find the ?homing script to remove the command that's homing the A
axis. But, I think I am OK now.
&n bsp;
Thanks for the quick response.
?
Regards,
Troy
?
?
?
Uncheck "Home Slave with Master" in General Config, and
edit your homing script to remove the command that's homing the A axis.
From: "testfly@...
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
2:30:04 PM
Subject: [mach1mach2cn c] Homing
with "X" axis with "A" motor as the SLAVE
?
I have now added switches so I can HOME and SQUARE the X axis.
I have a question about how this should work.
?
Here is what I get when I hit "REF ALL HOME"
?
The X axis moves in the - direction ?(AS EXPECTED)
When the Home Switches are hit each motor ("X" and
"A") back OFF the switches?(AS EXPECTED)
Then the "A" axis motor moves back to the switch and
triggers it a second time and agai n it backs OFF and stops. (NOT SURE THIS IS
CORRECT OR NOT)
?
Is there something I am missing?
?
Thanks,
Troy
?
?
?
?
|
Hi Troy, If you set the back off DRO to -.35", and then command the X to go to zero, you would be +.35 away from the switches. It would be nice if you can get all that into the homing command. But I am not sure of the syntax required, and if it could all be issued in the homing routine.
--------------------------------------------
toggle quoted message
Show quoted text
On Wed, 2/18/15, testfly@... [mach1mach2cnc] <mach1mach2cnc@...> wrote:
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
To: mach1mach2cnc@...
Date: Wednesday, February 18, 2015, 6:20 PM
?
One more HOMING
question. ?I can set how far
off the switch the Axis are after Homing.However, A closer
look and all I am really doing is setting the "Machine
DRO" to read a value.In fact the axis
backs OFF the same amount and the Machine DRO gets set to
the value I have entered. ?Is this correct or
am I missing something? ?The reason I ask is
because I would like the axis to back OFF the switch .350
and I can't figure out how to get the axis to move off
just a little more after hitting the switch when
HOMING.It moves OFF enough
to un-trigger the switches. But I would like it to back OFF
just a bit more. ? ?Thanks,Troy ? ? ? ?From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 4:15
PM
To:
mach1mach2cnc@...
Subject: RE: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE ?? OK I
understand.?So, I removed the
check and I removed the last line in the script which was
?"DoButton( 25 )" .?It seems to be
working right.?Anything else I
should take a look at??Thanks again for the
help.?Regards,Troy??From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015
3:46 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE?? If
home slave with master is checked, then the A axis is not
using it's home switch, and no autosquaring will occur.
To edit the homing macro, go to Operator > Edit button
script, and click the home button.?From: "testfly@...
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
3:42:44 PM
Subject: RE:
[mach1mach2cnc] Homing with "X" axis with
"A" motor as the SLAVE???Thanks!?I did not have a
check in the ?"Home
Slave with Master"So I checked that
box to see what happened and That seems to have solved my
problem.?Also I did not find
the ?homing script to
remove the command that's homing the A axis.
But, I
think I am OK now.&n
bsp;Thanks for the quick
response.?Regards,Troy?From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015
2:42 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE??
Uncheck "Home Slave with
Master" in General Config, and edit your homing script
to remove the command that's homing the A
axis.?From: "testfly@...
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
2:30:04 PM
Subject: [mach1mach2cn c]
Homing with "X" axis with "A" motor as
the SLAVE???I have now added switches so I can HOME
and SQUARE the X axis.I have a question about how this should
work.?Here is what I get when I hit "REF
ALL HOME"?The X axis moves in the - direction
?(AS EXPECTED)When
the Home Switches are hit each motor ("X" and
"A") back OFF the switches?(AS
EXPECTED)Then the
"A" axis motor moves back to the switch and
triggers it a second time and agai n it backs OFF and stops.
(NOT SURE THIS IS CORRECT OR NOT)??Is there something I am
missing??Thanks,Troy??????
#yiv5122067922 #yiv5122067922 --
#yiv5122067922ygrp-mkp {
border:1px solid #d8d8d8;font-family:Arial;margin:10px
0;padding:0 10px;}
#yiv5122067922 #yiv5122067922ygrp-mkp hr {
border:1px solid #d8d8d8;}
#yiv5122067922 #yiv5122067922ygrp-mkp #yiv5122067922hd {
color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px
0;}
#yiv5122067922 #yiv5122067922ygrp-mkp #yiv5122067922ads {
margin-bottom:10px;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad {
padding:0 0;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad p {
margin:0;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad a {
color:#0000ff;text-decoration:none;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc {
font-family:Arial;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc #yiv5122067922hd {
margin:10px
0px;font-weight:700;font-size:78%;line-height:122%;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc .yiv5122067922ad {
margin-bottom:10px;padding:0 0;}
#yiv5122067922 #yiv5122067922actions {
font-family:Verdana;font-size:11px;padding:10px 0;}
#yiv5122067922 #yiv5122067922activity {
background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}
#yiv5122067922 #yiv5122067922activity span {
font-weight:700;}
#yiv5122067922 #yiv5122067922activity span:first-child {
text-transform:uppercase;}
#yiv5122067922 #yiv5122067922activity span a {
color:#5085b6;text-decoration:none;}
#yiv5122067922 #yiv5122067922activity span span {
color:#ff7900;}
#yiv5122067922 #yiv5122067922activity span
.yiv5122067922underline {
text-decoration:underline;}
#yiv5122067922 .yiv5122067922attach {
clear:both;display:table;font-family:Arial;font-size:12px;padding:10px
0;width:400px;}
#yiv5122067922 .yiv5122067922attach div a {
text-decoration:none;}
#yiv5122067922 .yiv5122067922attach img {
border:none;padding-right:5px;}
#yiv5122067922 .yiv5122067922attach label {
display:block;margin-bottom:5px;}
#yiv5122067922 .yiv5122067922attach label a {
text-decoration:none;}
#yiv5122067922 blockquote {
margin:0 0 0 4px;}
#yiv5122067922 .yiv5122067922bold {
font-family:Arial;font-size:13px;font-weight:700;}
#yiv5122067922 .yiv5122067922bold a {
text-decoration:none;}
#yiv5122067922 dd.yiv5122067922last p a {
font-family:Verdana;font-weight:700;}
#yiv5122067922 dd.yiv5122067922last p span {
margin-right:10px;font-family:Verdana;font-weight:700;}
#yiv5122067922 dd.yiv5122067922last p
span.yiv5122067922yshortcuts {
margin-right:0;}
#yiv5122067922 div.yiv5122067922attach-table div div a {
text-decoration:none;}
#yiv5122067922 div.yiv5122067922attach-table {
width:400px;}
#yiv5122067922 div.yiv5122067922file-title a, #yiv5122067922
div.yiv5122067922file-title a:active, #yiv5122067922
div.yiv5122067922file-title a:hover, #yiv5122067922
div.yiv5122067922file-title a:visited {
text-decoration:none;}
#yiv5122067922 div.yiv5122067922photo-title a,
#yiv5122067922 div.yiv5122067922photo-title a:active,
#yiv5122067922 div.yiv5122067922photo-title a:hover,
#yiv5122067922 div.yiv5122067922photo-title a:visited {
text-decoration:none;}
#yiv5122067922 div#yiv5122067922ygrp-mlmsg
#yiv5122067922ygrp-msg p a span.yiv5122067922yshortcuts {
font-family:Verdana;font-size:10px;font-weight:normal;}
#yiv5122067922 .yiv5122067922green {
color:#628c2a;}
#yiv5122067922 .yiv5122067922MsoNormal {
margin:0 0 0 0;}
#yiv5122067922 o {
font-size:0;}
#yiv5122067922 #yiv5122067922photos div {
float:left;width:72px;}
#yiv5122067922 #yiv5122067922photos div div {
border:1px solid
#666666;height:62px;overflow:hidden;width:62px;}
#yiv5122067922 #yiv5122067922photos div label {
color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}
#yiv5122067922 #yiv5122067922reco-category {
font-size:77%;}
#yiv5122067922 #yiv5122067922reco-desc {
font-size:77%;}
#yiv5122067922 .yiv5122067922replbq {
margin:4px;}
#yiv5122067922 #yiv5122067922ygrp-actbar div a:first-child {
margin-right:2px;padding-right:5px;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg {
font-size:13px;font-family:Arial, helvetica, clean,
sans-serif;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg table {
font-size:inherit;font:100%;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg select,
#yiv5122067922 input, #yiv5122067922 textarea {
font:99% Arial, Helvetica, clean, sans-serif;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg pre, #yiv5122067922
code {
font:115% monospace;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg * {
line-height:1.22em;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg #yiv5122067922logo {
padding-bottom:10px;}
#yiv5122067922 #yiv5122067922ygrp-msg p a {
font-family:Verdana;}
#yiv5122067922 #yiv5122067922ygrp-msg
p#yiv5122067922attach-count span {
color:#1E66AE;font-weight:700;}
#yiv5122067922 #yiv5122067922ygrp-reco
#yiv5122067922reco-head {
color:#ff7900;font-weight:700;}
#yiv5122067922 #yiv5122067922ygrp-reco {
margin-bottom:20px;padding:0px;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
li a {
font-size:130%;text-decoration:none;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
li {
font-size:77%;list-style-type:square;padding:6px 0;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
ul {
margin:0;padding:0 0 0 8px;}
#yiv5122067922 #yiv5122067922ygrp-text {
font-family:Georgia;}
#yiv5122067922 #yiv5122067922ygrp-text p {
margin:0 0 1em 0;}
#yiv5122067922 #yiv5122067922ygrp-text tt {
font-size:120%;}
#yiv5122067922 #yiv5122067922ygrp-vital ul li:last-child {
border-right:none !important;
}
#yiv5122067922
|
That helped. I set the back-off to -.050 and after HOMING I hit "GO TO ZERO" and the machine stopes where I wanted. ? Thanks. ? I think I am good now. I just have to remember to hit "GO TO ZERO" so the axis is not parked on the limit switch plungers. ? Regards, Troy ? ? ?
toggle quoted message
Show quoted text
From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 7:15 PM
To: mach1mach2cnc@...
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE? ? Hi Troy, If you set the back off DRO to -.35", and then command the X to go to zero, you would be +.35 away from the switches. It would be nice if you can get all that into the homing command. But I am not sure of the syntax required, and if it could all be issued in the homing routine.
--------------------------------------------
On Wed, 2/18/15, testfly@... [mach1mach2cnc] <mach1mach2cnc@...> wrote:
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
To: mach1mach2cnc@...
Date: Wednesday, February 18, 2015, 6:20 PM
?
One more HOMING
question. ?I can set how far
off the switch the Axis are after Homing.However, A closer
look and all I am really doing is setting the "Machine
DRO" to read a value.In fact the axis
backs OFF the same amount and the Machine DRO gets set to
the value I have entered. ?Is this correct or
am I missing something? ?The reason I ask is
because I would like the axis to back OFF the switch .350
and I can't figure out how to get the axis to move off
just a little more after hitting the switch when
HOMING.It moves OFF enough
to un-trigger the switches. But I would like it to back OFF
just a bit more. ? ?Thanks,Troy ? ? ? ?From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 4:15
PM
To:
mach1mach2cnc@...
Subject: RE: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE ?? OK I
understand.?So, I removed the
check and I removed the last line in the script which was
?"DoButton( 25 )" .?It seems to be
working right.?Anything else I
should take a look at??Thanks again for the
help.?Regards,Troy??From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015
3:46 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE?? If
home slave with master is checked, then the A axis is not
using it's home switch, and no autosquaring will occur.
To edit the homing macro, go to Operator > Edit button
script, and click the home button.?From: "testfly@...
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
3:42:44 PM
Subject: RE:
[mach1mach2cnc] Homing with "X" axis with
"A" motor as the SLAVE???Thanks!?I did not have a
check in the ?"Home
Slave with Master"So I checked that
box to see what happened and That seems to have solved my
problem.?Also I did not find
the ?homing script to
remove the command that's homing the A axis.
But, I
think I am OK now.&n
bsp;Thanks for the quick
response.?Regards,Troy?From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015
2:42 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE??
Uncheck "Home Slave with
Master" in General Config, and edit your homing script
to remove the command that's homing the A
axis.?From: "testfly@...
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
2:30:04 PM
Subject: [mach1mach2cn c]
Homing with "X" axis with "A" motor as
the SLAVE???I have now added switches so I can HOME
and SQUARE the X axis.I have a question about how this should
work.?Here is what I get when I hit "REF
ALL HOME"?The X axis moves in the - direction
?(AS EXPECTED)When
the Home Switches are hit each motor ("X" and
"A") back OFF the switches?(AS
EXPECTED)Then the
"A" axis motor moves back to the switch and
triggers it a second time and agai n it backs OFF and stops.
(NOT SURE THIS IS CORRECT OR NOT)??Is there something I am
missing??Thanks,Troy??????
#yiv5122067922 #yiv5122067922 --
#yiv5122067922ygrp-mkp {
border:1px solid #d8d8d8;font-family:Arial;margin:10px
0;padding:0 10px;}
#yiv5122067922 #yiv5122067922ygrp-mkp hr {
border:1px solid #d8d8d8;}
#yiv5122067922 #yiv5122067922ygrp-mkp #yiv5122067922hd {
color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px
0;}
#yiv5122067922 #yiv5122067922ygrp-mkp #yiv5122067922ads {
margin-bottom:10px;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad {
padding:0 0;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad p {
margin:0;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad a {
color:#0000ff;text-decoration:none;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc {
font-family:Arial;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc #yiv5122067922hd {
margin:10px
0px;font-weight:700;font-size:78%;line-height:122%;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc .yiv5122067922ad {
margin-bottom:10px;padding:0 0;}
#yiv5122067922 #yiv5122067922actions {
font-family:Verdana;font-size:11px;padding:10px 0;}
#yiv5122067922 #yiv5122067922activity {
background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}
#yiv5122067922 #yiv5122067922activity span {
font-weight:700;}
#yiv5122067922 #yiv5122067922activity span:first-child {
text-transform:uppercase;}
#yiv5122067922 #yiv5122067922activity span a {
color:#5085b6;text-decoration:none;}
#yiv5122067922 #yiv5122067922activity span span {
color:#ff7900;}
#yiv5122067922 #yiv5122067922activity span
.yiv5122067922underline {
text-decoration:underline;}
#yiv5122067922 .yiv5122067922attach {
clear:both;display:table;font-family:Arial;font-size:12px;padding:10px
0;width:400px;}
#yiv5122067922 .yiv5122067922attach div a {
text-decoration:none;}
#yiv5122067922 .yiv5122067922attach img {
border:none;padding-right:5px;}
#yiv5122067922 .yiv5122067922attach label {
display:block;margin-bottom:5px;}
#yiv5122067922 .yiv5122067922attach label a {
text-decoration:none;}
#yiv5122067922 blockquote {
margin:0 0 0 4px;}
#yiv5122067922 .yiv5122067922bold {
font-family:Arial;font-size:13px;font-weight:700;}
#yiv5122067922 .yiv5122067922bold a {
text-decoration:none;}
#yiv5122067922 dd.yiv5122067922last p a {
font-family:Verdana;font-weight:700;}
#yiv5122067922 dd.yiv5122067922last p span {
margin-right:10px;font-family:Verdana;font-weight:700;}
#yiv5122067922 dd.yiv5122067922last p
span.yiv5122067922yshortcuts {
margin-right:0;}
#yiv5122067922 div.yiv5122067922attach-table div div a {
text-decoration:none;}
#yiv5122067922 div.yiv5122067922attach-table {
width:400px;}
#yiv5122067922 div.yiv5122067922file-title a, #yiv5122067922
div.yiv5122067922file-title a:active, #yiv5122067922
div.yiv5122067922file-title a:hover, #yiv5122067922
div.yiv5122067922file-title a:visited {
text-decoration:none;}
#yiv5122067922 div.yiv5122067922photo-title a,
#yiv5122067922 div.yiv5122067922photo-title a:active,
#yiv5122067922 div.yiv5122067922photo-title a:hover,
#yiv5122067922 div.yiv5122067922photo-title a:visited {
text-decoration:none;}
#yiv5122067922 div#yiv5122067922ygrp-mlmsg
#yiv5122067922ygrp-msg p a span.yiv5122067922yshortcuts {
font-family:Verdana;font-size:10px;font-weight:normal;}
#yiv5122067922 .yiv5122067922green {
color:#628c2a;}
#yiv5122067922 .yiv5122067922MsoNormal {
margin:0 0 0 0;}
#yiv5122067922 o {
font-size:0;}
#yiv5122067922 #yiv5122067922photos div {
float:left;width:72px;}
#yiv5122067922 #yiv5122067922photos div div {
border:1px solid
#666666;height:62px;overflow:hidden;width:62px;}
#yiv5122067922 #yiv5122067922photos div label {
color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}
#yiv5122067922 #yiv5122067922reco-category {
font-size:77%;}
#yiv5122067922 #yiv5122067922reco-desc {
font-size:77%;}
#yiv5122067922 .yiv5122067922replbq {
margin:4px;}
#yiv5122067922 #yiv5122067922ygrp-actbar div a:first-child {
margin-right:2px;padding-right:5px;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg {
font-size:13px;font-family:Arial, helvetica, clean,
sans-serif;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg table {
font-size:inherit;font:100%;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg select,
#yiv5122067922 input, #yiv5122067922 textarea {
font:99% Arial, Helvetica, clean, sans-serif;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg pre, #yiv5122067922
code {
font:115% monospace;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg * {
line-height:1.22em;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg #yiv5122067922logo {
padding-bottom:10px;}
#yiv5122067922 #yiv5122067922ygrp-msg p a {
font-family:Verdana;}
#yiv5122067922 #yiv5122067922ygrp-msg
p#yiv5122067922attach-count span {
color:#1E66AE;font-weight:700;}
#yiv5122067922 #yiv5122067922ygrp-reco
#yiv5122067922reco-head {
color:#ff7900;font-weight:700;}
#yiv5122067922 #yiv5122067922ygrp-reco {
margin-bottom:20px;padding:0px;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
li a {
font-size:130%;text-decoration:none;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
li {
font-size:77%;list-style-type:square;padding:6px 0;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
ul {
margin:0;padding:0 0 0 8px;}
#yiv5122067922 #yiv5122067922ygrp-text {
font-family:Georgia;}
#yiv5122067922 #yiv5122067922ygrp-text p {
margin:0 0 1em 0;}
#yiv5122067922 #yiv5122067922ygrp-text tt {
font-size:120%;}
#yiv5122067922 #yiv5122067922ygrp-vital ul li:last-child {
border-right:none !important;
}
#yiv5122067922
|
Add this to the end of your homing macro:
Code "G53 G0 X0 Y0 Z0"
While IsMoving()
Wend
Gerry
On 2/18/2015 7:46 PM,
testfly@... [mach1mach2cnc] wrote:
toggle quoted message
Show quoted text
That
helped.
I
set the back-off to -.050 and after HOMING I hit "GO TO
ZERO" and the machine stopes where I wanted.
?
Thanks.
?
I
think I am good now. I just have to remember to hit "GO TO
ZERO" so the axis is not parked on the limit switch
plungers.
?
Regards,
Troy
?
?
?
?
?
Hi Troy, If you set the
back off DRO to -.35", and then command the X to go to
zero, you would be +.35 away from the switches. It would
be nice if you can get all that into the homing command.
But I am not sure of the syntax required, and if it
could all be issued in the homing routine.
--------------------------------------------
On Wed, 2/18/15, testfly@...
[mach1mach2cnc] <mach1mach2cnc@...>
wrote:
Subject: RE: [mach1mach2cnc] Homing with "X" axis with
"A" motor as the SLAVE
To: mach1mach2cnc@...
Date: Wednesday, February 18, 2015, 6:20 PM
?
One more HOMING
question. ?I can set how far
off the switch the Axis are after Homing.However, A
closer
look and all I am really doing is setting the "Machine
DRO" to read a value.In fact the axis
backs OFF the same amount and the Machine DRO gets set
to
the value I have entered. ?Is this correct or
am I missing something? ?The reason I ask is
because I would like the axis to back OFF the switch
.350
and I can't figure out how to get the axis to move off
just a little more after hitting the switch when
HOMING.It moves OFF enough
to un-trigger the switches. But I would like it to back
OFF
just a bit more. ? ?Thanks,Troy ? ? ? ?From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 4:15
PM
To:
mach1mach2cnc@...
Subject: RE: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE ?? OK I
understand.?So, I removed the
check and I removed the last line in the script which
was
?"DoButton( 25 )" .?It seems to be
working right.?Anything else I
should take a look at??Thanks again for the
help.?Regards,Troy??From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015
3:46 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE?? If
home slave with master is checked, then the A axis is
not
using it's home switch, and no autosquaring will occur.
To edit the homing macro, go to Operator > Edit
button
script, and click the home button.?From: "testfly@...
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
3:42:44 PM
Subject: RE:
[mach1mach2cnc] Homing with "X" axis with
"A" motor as the SLAVE???Thanks!?I did not have a
check in the ?"Home
Slave with Master"So I checked that
box to see what happened and That seems to have solved
my
problem.?Also I did not find
the ?homing script to
remove the command that's homing the A axis.
But, I
think I am OK now.&n
bsp;Thanks for the quick
response.?Regards,Troy?From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015
2:42 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE??
Uncheck "Home Slave with
Master" in General Config, and edit your homing script
to remove the command that's homing the A
axis.?From: "testfly@...
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
2:30:04 PM
Subject: [mach1mach2cn c]
Homing with "X" axis with "A" motor as
the SLAVE???I have now added switches so I can HOME
and SQUARE the X axis.I have a question about how this
should
work.?Here is what I get when I hit "REF
ALL HOME"?The X axis moves in the - direction
?(AS EXPECTED)When
the Home Switches are hit each motor ("X" and
"A") back OFF the switches?(AS
EXPECTED)Then the
"A" axis motor moves back to the switch and
triggers it a second time and agai n it backs OFF and
stops.
(NOT SURE THIS IS CORRECT OR NOT)??Is there something I
am
missing??Thanks,Troy??????
#yiv5122067922 #yiv5122067922 --
#yiv5122067922ygrp-mkp {
border:1px solid #d8d8d8;font-family:Arial;margin:10px
0;padding:0 10px;}
#yiv5122067922 #yiv5122067922ygrp-mkp hr {
border:1px solid #d8d8d8;}
#yiv5122067922 #yiv5122067922ygrp-mkp #yiv5122067922hd {
color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px
0;}
#yiv5122067922 #yiv5122067922ygrp-mkp #yiv5122067922ads
{
margin-bottom:10px;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad {
padding:0 0;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad p
{
margin:0;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad a
{
color:#0000ff;text-decoration:none;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc {
font-family:Arial;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc #yiv5122067922hd {
margin:10px
0px;font-weight:700;font-size:78%;line-height:122%;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc .yiv5122067922ad {
margin-bottom:10px;padding:0 0;}
#yiv5122067922 #yiv5122067922actions {
font-family:Verdana;font-size:11px;padding:10px 0;}
#yiv5122067922 #yiv5122067922activity {
background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}
#yiv5122067922 #yiv5122067922activity span {
font-weight:700;}
#yiv5122067922 #yiv5122067922activity span:first-child {
text-transform:uppercase;}
#yiv5122067922 #yiv5122067922activity span a {
color:#5085b6;text-decoration:none;}
#yiv5122067922 #yiv5122067922activity span span {
color:#ff7900;}
#yiv5122067922 #yiv5122067922activity span
.yiv5122067922underline {
text-decoration:underline;}
#yiv5122067922 .yiv5122067922attach {
clear:both;display:table;font-family:Arial;font-size:12px;padding:10px
0;width:400px;}
#yiv5122067922 .yiv5122067922attach div a {
text-decoration:none;}
#yiv5122067922 .yiv5122067922attach img {
border:none;padding-right:5px;}
#yiv5122067922 .yiv5122067922attach label {
display:block;margin-bottom:5px;}
#yiv5122067922 .yiv5122067922attach label a {
text-decoration:none;}
#yiv5122067922 blockquote {
margin:0 0 0 4px;}
#yiv5122067922 .yiv5122067922bold {
font-family:Arial;font-size:13px;font-weight:700;}
#yiv5122067922 .yiv5122067922bold a {
text-decoration:none;}
#yiv5122067922 dd.yiv5122067922last p a {
font-family:Verdana;font-weight:700;}
#yiv5122067922 dd.yiv5122067922last p span {
margin-right:10px;font-family:Verdana;font-weight:700;}
#yiv5122067922 dd.yiv5122067922last p
span.yiv5122067922yshortcuts {
margin-right:0;}
#yiv5122067922 div.yiv5122067922attach-table div div a {
text-decoration:none;}
#yiv5122067922 div.yiv5122067922attach-table {
width:400px;}
#yiv5122067922 div.yiv5122067922file-title a,
#yiv5122067922
div.yiv5122067922file-title a:active, #yiv5122067922
div.yiv5122067922file-title a:hover, #yiv5122067922
div.yiv5122067922file-title a:visited {
text-decoration:none;}
#yiv5122067922 div.yiv5122067922photo-title a,
#yiv5122067922 div.yiv5122067922photo-title a:active,
#yiv5122067922 div.yiv5122067922photo-title a:hover,
#yiv5122067922 div.yiv5122067922photo-title a:visited {
text-decoration:none;}
#yiv5122067922 div#yiv5122067922ygrp-mlmsg
#yiv5122067922ygrp-msg p a span.yiv5122067922yshortcuts
{
font-family:Verdana;font-size:10px;font-weight:normal;}
#yiv5122067922 .yiv5122067922green {
color:#628c2a;}
#yiv5122067922 .yiv5122067922MsoNormal {
margin:0 0 0 0;}
#yiv5122067922 o {
font-size:0;}
#yiv5122067922 #yiv5122067922photos div {
float:left;width:72px;}
#yiv5122067922 #yiv5122067922photos div div {
border:1px solid
#666666;height:62px;overflow:hidden;width:62px;}
#yiv5122067922 #yiv5122067922photos div label {
color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}
#yiv5122067922 #yiv5122067922reco-category {
font-size:77%;}
#yiv5122067922 #yiv5122067922reco-desc {
font-size:77%;}
#yiv5122067922 .yiv5122067922replbq {
margin:4px;}
#yiv5122067922 #yiv5122067922ygrp-actbar div
a:first-child {
margin-right:2px;padding-right:5px;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg {
font-size:13px;font-family:Arial, helvetica, clean,
sans-serif;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg table {
font-size:inherit;font:100%;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg select,
#yiv5122067922 input, #yiv5122067922 textarea {
font:99% Arial, Helvetica, clean, sans-serif;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg pre,
#yiv5122067922
code {
font:115% monospace;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg * {
line-height:1.22em;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg
#yiv5122067922logo {
padding-bottom:10px;}
#yiv5122067922 #yiv5122067922ygrp-msg p a {
font-family:Verdana;}
#yiv5122067922 #yiv5122067922ygrp-msg
p#yiv5122067922attach-count span {
color:#1E66AE;font-weight:700;}
#yiv5122067922 #yiv5122067922ygrp-reco
#yiv5122067922reco-head {
color:#ff7900;font-weight:700;}
#yiv5122067922 #yiv5122067922ygrp-reco {
margin-bottom:20px;padding:0px;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ov
li a {
font-size:130%;text-decoration:none;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ov
li {
font-size:77%;list-style-type:square;padding:6px 0;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ov
ul {
margin:0;padding:0 0 0 8px;}
#yiv5122067922 #yiv5122067922ygrp-text {
font-family:Georgia;}
#yiv5122067922 #yiv5122067922ygrp-text p {
margin:0 0 1em 0;}
#yiv5122067922 #yiv5122067922ygrp-text tt {
font-size:120%;}
#yiv5122067922 #yiv5122067922ygrp-vital ul li:last-child
{
border-right:none !important;
}
#yiv5122067922
|
Hi Gerry, ? Not sure where the Homing micro is. I added it to the script onto the REF ALL HOME button and the machine will rapid to X 0 and then slowly move to hit the home switches and back off. I then still have to hit the GO TO ZERO for the X axis to stop where I want it to. ? Did I put the suggested script in the wrong place? What might I be doing wrong if that should work? ? Thanks, Troy ? ?
toggle quoted message
Show quoted text
From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 10:57 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE? ? Add this to the end of your homing macro:
Code "G53 G0 X0 Y0 Z0"
While IsMoving()
Wend
Gerry
On 2/18/2015 7:46 PM, testfly@... [mach1mach2cnc] wrote: That helped. I set the back-off to -.050 and after HOMING I hit "GO TO ZERO" and the machine stopes where I wanted. ? Thanks. ? I think I am good now. I just have to remember to hit "GO TO ZERO" so the axis is not parked on the limit switch plungers. ? Regards, Troy ? ? ? ? ? Hi Troy, If you set the back off DRO to -.35", and then command the X to go to zero, you would be +.35 away from the switches. It would be nice if you can get all that into the homing command. But I am not sure of the syntax required, and if it could all be issued in the homing routine.
--------------------------------------------
On Wed, 2/18/15, testfly@... [mach1mach2cnc] <mach1mach2cnc@...> wrote:
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
To: mach1mach2cnc@...
Date: Wednesday, February 18, 2015, 6:20 PM
?
One more HOMING
question. ?I can set how far
off the switch the Axis are after Homing.However, A closer
look and all I am really doing is setting the "Machine
DRO" to read a value.In fact the axis
backs OFF the same amount and the Machine DRO gets set to
the value I have entered. ?Is this correct or
am I missing something? ?The reason I ask is
because I would like the axis to back OFF the switch .350
and I can't figure out how to get the axis to move off
just a little more after hitting the switch when
HOMING.It moves OFF enough
to un-trigger the switches. But I would like it to back OFF
just a bit more. ? ?Thanks,Troy ? ? ? ?From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 4:15
PM
To:
mach1mach2cnc@...
Subject: RE: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE ?? OK I
understand.?So, I removed the
check and I removed the last line in the script which was
?"DoButton( 25 )" .?It seems to be
working right.?Anything else I
should take a look at??Thanks again for the
help.?Regards,Troy??From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015
3:46 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE?? If
home slave with master is checked, then the A axis is not
using it's home switch, and no autosquaring will occur.
To edit the homing macro, go to Operator > Edit button
script, and click the home button.?From: "testfly@...
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
3:42:44 PM
Subject: RE:
[mach1mach2cnc] Homing with "X" axis with
"A" motor as the SLAVE???Thanks!?I did not have a
check in the ?"Home
Slave with Master"So I checked that
box to see what happened and That seems to have solved my
problem.?Also I did not find
the ?homing script to
remove the command that's homing the A axis.
But, I
think I am OK now.&n
bsp;Thanks for the quick
response.?Regards,Troy?From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015
2:42 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE??
Uncheck "Home Slave with
Master" in General Config, and edit your homing script
to remove the command that's homing the A
axis.?From: "testfly@...
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
2:30:04 PM
Subject: [mach1mach2cn c]
Homing with "X" axis with "A" motor as
the SLAVE???I have now added switches so I can HOME
and SQUARE the X axis.I have a question about how this should
work.?Here is what I get when I hit "REF
ALL HOME"?The X axis moves in the - direction
?(AS EXPECTED)When
the Home Switches are hit each motor ("X" and
"A") back OFF the switches?(AS
EXPECTED)Then the
"A" axis motor moves back to the switch and
triggers it a second time and agai n it backs OFF and stops.
(NOT SURE THIS IS CORRECT OR NOT)??Is there something I am
missing??Thanks,Troy??????
#yiv5122067922 #yiv5122067922 --
#yiv5122067922ygrp-mkp {
border:1px solid #d8d8d8;font-family:Arial;margin:10px
0;padding:0 10px;}
#yiv5122067922 #yiv5122067922ygrp-mkp hr {
border:1px solid #d8d8d8;}
#yiv5122067922 #yiv5122067922ygrp-mkp #yiv5122067922hd {
color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px
0;}
#yiv5122067922 #yiv5122067922ygrp-mkp #yiv5122067922ads {
margin-bottom:10px;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad {
padding:0 0;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad p {
margin:0;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad a {
color:#0000ff;text-decoration:none;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc {
font-family:Arial;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc #yiv5122067922hd {
margin:10px
0px;font-weight:700;font-size:78%;line-height:122%;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc .yiv5122067922ad {
margin-bottom:10px;padding:0 0;}
#yiv5122067922 #yiv5122067922actions {
font-family:Verdana;font-size:11px;padding:10px 0;}
#yiv5122067922 #yiv5122067922activity {
background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}
#yiv5122067922 #yiv5122067922activity span {
font-weight:700;}
#yiv5122067922 #yiv5122067922activity span:first-child {
text-transform:uppercase;}
#yiv5122067922 #yiv5122067922activity span a {
color:#5085b6;text-decoration:none;}
#yiv5122067922 #yiv5122067922activity span span {
color:#ff7900;}
#yiv5122067922 #yiv5122067922activity span
.yiv5122067922underline {
text-decoration:underline;}
#yiv5122067922 .yiv5122067922attach {
clear:both;display:table;font-family:Arial;font-size:12px;padding:10px
0;width:400px;}
#yiv5122067922 .yiv5122067922attach div a {
text-decoration:none;}
#yiv5122067922 .yiv5122067922attach img {
border:none;padding-right:5px;}
#yiv5122067922 .yiv5122067922attach label {
display:block;margin-bottom:5px;}
#yiv5122067922 .yiv5122067922attach label a {
text-decoration:none;}
#yiv5122067922 blockquote {
margin:0 0 0 4px;}
#yiv5122067922 .yiv5122067922bold {
font-family:Arial;font-size:13px;font-weight:700;}
#yiv5122067922 .yiv5122067922bold a {
text-decoration:none;}
#yiv5122067922 dd.yiv5122067922last p a {
font-family:Verdana;font-weight:700;}
#yiv5122067922 dd.yiv5122067922last p span {
margin-right:10px;font-family:Verdana;font-weight:700;}
#yiv5122067922 dd.yiv5122067922last p
span.yiv5122067922yshortcuts {
margin-right:0;}
#yiv5122067922 div.yiv5122067922attach-table div div a {
text-decoration:none;}
#yiv5122067922 div.yiv5122067922attach-table {
width:400px;}
#yiv5122067922 div.yiv5122067922file-title a, #yiv5122067922
div.yiv5122067922file-title a:active, #yiv5122067922
div.yiv5122067922file-title a:hover, #yiv5122067922
div.yiv5122067922file-title a:visited {
text-decoration:none;}
#yiv5122067922 div.yiv5122067922photo-title a,
#yiv5122067922 div.yiv5122067922photo-title a:active,
#yiv5122067922 div.yiv5122067922photo-title a:hover,
#yiv5122067922 div.yiv5122067922photo-title a:visited {
text-decoration:none;}
#yiv5122067922 div#yiv5122067922ygrp-mlmsg
#yiv5122067922ygrp-msg p a span.yiv5122067922yshortcuts {
font-family:Verdana;font-size:10px;font-weight:normal;}
#yiv5122067922 .yiv5122067922green {
color:#628c2a;}
#yiv5122067922 .yiv5122067922MsoNormal {
margin:0 0 0 0;}
#yiv5122067922 o {
font-size:0;}
#yiv5122067922 #yiv5122067922photos div {
float:left;width:72px;}
#yiv5122067922 #yiv5122067922photos div div {
border:1px solid
#666666;height:62px;overflow:hidden;width:62px;}
#yiv5122067922 #yiv5122067922photos div label {
color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}
#yiv5122067922 #yiv5122067922reco-category {
font-size:77%;}
#yiv5122067922 #yiv5122067922reco-desc {
font-size:77%;}
#yiv5122067922 .yiv5122067922replbq {
margin:4px;}
#yiv5122067922 #yiv5122067922ygrp-actbar div a:first-child {
margin-right:2px;padding-right:5px;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg {
font-size:13px;font-family:Arial, helvetica, clean,
sans-serif;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg table {
font-size:inherit;font:100%;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg select,
#yiv5122067922 input, #yiv5122067922 textarea {
font:99% Arial, Helvetica, clean, sans-serif;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg pre, #yiv5122067922
code {
font:115% monospace;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg * {
line-height:1.22em;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg #yiv5122067922logo {
padding-bottom:10px;}
#yiv5122067922 #yiv5122067922ygrp-msg p a {
font-family:Verdana;}
#yiv5122067922 #yiv5122067922ygrp-msg
p#yiv5122067922attach-count span {
color:#1E66AE;font-weight:700;}
#yiv5122067922 #yiv5122067922ygrp-reco
#yiv5122067922reco-head {
color:#ff7900;font-weight:700;}
#yiv5122067922 #yiv5122067922ygrp-reco {
margin-bottom:20px;padding:0px;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
li a {
font-size:130%;text-decoration:none;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
li {
font-size:77%;list-style-type:square;padding:6px 0;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
ul {
margin:0;padding:0 0 0 8px;}
#yiv5122067922 #yiv5122067922ygrp-text {
font-family:Georgia;}
#yiv5122067922 #yiv5122067922ygrp-text p {
margin:0 0 1em 0;}
#yiv5122067922 #yiv5122067922ygrp-text tt {
font-size:120%;}
#yiv5122067922 #yiv5122067922ygrp-vital ul li:last-child {
border-right:none !important;
}
#yiv5122067922
?
|
Add it to the END of the Ref All Home script.
Gerry
From: "testfly@... [mach1mach2cnc]" To: mach1mach2cnc@... Sent: Thursday, February 19, 2015 9:54:37 AM Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
Hi Gerry, ? Not sure where the Homing micro is. I added it to the script onto the REF ALL HOME button and the machine will rapid to X 0 and then slowly move to hit the home switches and back off. I then still have to hit the GO TO ZERO for the X axis to stop where I want it to. ? Did I put the suggested script in the wrong place? What might I be doing wrong if that should work? ? Thanks, Troy ? ? From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 10:57 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE ? ? Add this to the end of your homing macro:
Code "G53 G0 X0 Y0 Z0"
While IsMoving()
Wend
Gerry
On 2/18/2015 7:46 PM, testfly@... [mach1mach2cnc] wrote: That helped. I set the back-off to -.050 and after HOMING I hit "GO TO ZERO" and the machine stopes where I wanted. ? Thanks. ? I think I am good now. I just have to remember to hit "GO TO ZERO" so the axis is not parked on the limit switch plungers. ? Regards, Troy ? ? ? ? ? Hi Troy, If you set the back off DRO to -.35", and then command the X to go to zero, you would be +.35 away from the switches. It would be nice if you can get all that into the homing command. But I am not sure of the syntax required, and if it could all be issued in the homing routine.
--------------------------------------------
On Wed, 2/18/15, testfly@... [mach1mach2cnc] <mach1mach2cnc@...> wrote:
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
To: mach1mach2cnc@...
Date: Wednesday, February 18, 2015, 6:20 PM
?
One more HOMING
question. ?I can set how far
off the switch the Axis are after Homing.However, A closer
look and all I am really doing is setting the "Machine
DRO" to read a value.In fact the axis
backs OFF the same amount and the Machine DRO gets set to
the value I have entered. ?Is this correct or
am I missing something? ?The reason I ask is
because I would like the axis to back OFF the switch .350
and I can't figure out how to get the axis to move off
just a little more after hitting the switch when
HOMING.It moves OFF enough
to un-trigger the switches. But I would like it to back OFF
just a bit more. ? ?Thanks,Troy ? ? ? ?From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 4:15
PM
To:
mach1mach2cnc@...
Subject: RE: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE ?? OK I
understand.?So, I removed the
check and I removed the last line in the script which was
?"DoButton( 25 )" .?It seems to be
working right.?Anything else I
should take a look at??Thanks again for the
help.?Regards,Troy??From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015
3:46 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE?? If
home slave with master is checked, then the A axis is not
using it's home switch, and no autosquaring will occur.
To edit the homing macro, go to Operator > Edit button
script, and click the home button.?From: "testfly@...
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
3:42:44 PM
Subject: RE:
[mach1mach2cnc] Homing with "X" axis with
"A" motor as the SLAVE???Thanks!?I did not have a
check in the ?"Home
Slave with Master"So I checked that
box to see what happened and That seems to have solved my
problem.?Also I did not find
the ?homing script to
remove the command that's homing the A axis.
But, I
think I am OK now.&n
bsp;Thanks for the quick
response.?Regards,Troy?From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015
2:42 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE??
Uncheck "Home Slave with
Master" in General Config, and edit your homing script
to remove the command that's homing the A
axis.?From: "testfly@...
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
2:30:04 PM
Subject: [mach1mach2cn c]
Homing with "X" axis with "A" motor as
the SLAVE???I have now added switches so I can HOME
and SQUARE the X axis.I have a question about how this should
work.?Here is what I get when I hit "REF
ALL HOME"?The X axis moves in the - direction
?(AS EXPECTED)When
the Home Switches are hit each motor ("X" and
"A") back OFF the switches?(AS
EXPECTED)Then the
"A" axis motor moves back to the switch and
triggers it a second time and agai n it backs OFF and stops.
(NOT SURE THIS IS CORRECT OR NOT)??Is there something I am
missing??Thanks,Troy??????
#yiv5122067922 #yiv5122067922 --
#yiv5122067922ygrp-mkp {
border:1px solid #d8d8d8;font-family:Arial;margin:10px
0;padding:0 10px;}
#yiv5122067922 #yiv5122067922ygrp-mkp hr {
border:1px solid #d8d8d8;}
#yiv5122067922 #yiv5122067922ygrp-mkp #yiv5122067922hd {
color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px
0;}
#yiv5122067922 #yiv5122067922ygrp-mkp #yiv5122067922ads {
margin-bottom:10px;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad {
padding:0 0;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad p {
margin:0;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad a {
color:#0000ff;text-decoration:none;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc {
font-family:Arial;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc #yiv5122067922hd {
margin:10px
0px;font-weight:700;font-size:78%;line-height:122%;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc .yiv5122067922ad {
margin-bottom:10px;padding:0 0;}
#yiv5122067922 #yiv5122067922actions {
font-family:Verdana;font-size:11px;padding:10px 0;}
#yiv5122067922 #yiv5122067922activity {
background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}
#yiv5122067922 #yiv5122067922activity span {
font-weight:700;}
#yiv5122067922 #yiv5122067922activity span:first-child {
text-transform:uppercase;}
#yiv5122067922 #yiv5122067922activity span a {
color:#5085b6;text-decoration:none;}
#yiv5122067922 #yiv5122067922activity span span {
color:#ff7900;}
#yiv5122067922 #yiv5122067922activity span
.yiv5122067922underline {
text-decoration:underline;}
#yiv5122067922 .yiv5122067922attach {
clear:both;display:table;font-family:Arial;font-size:12px;padding:10px
0;width:400px;}
#yiv5122067922 .yiv5122067922attach div a {
text-decoration:none;}
#yiv5122067922 .yiv5122067922attach img {
border:none;padding-right:5px;}
#yiv5122067922 .yiv5122067922attach label {
display:block;margin-bottom:5px;}
#yiv5122067922 .yiv5122067922attach label a {
text-decoration:none;}
#yiv5122067922 blockquote {
margin:0 0 0 4px;}
#yiv5122067922 .yiv5122067922bold {
font-family:Arial;font-size:13px;font-weight:700;}
#yiv5122067922 .yiv5122067922bold a {
text-decoration:none;}
#yiv5122067922 dd.yiv5122067922last p a {
font-family:Verdana;font-weight:700;}
#yiv5122067922 dd.yiv5122067922last p span {
margin-right:10px;font-family:Verdana;font-weight:700;}
#yiv5122067922 dd.yiv5122067922last p
span.yiv5122067922yshortcuts {
margin-right:0;}
#yiv5122067922 div.yiv5122067922attach-table div div a {
text-decoration:none;}
#yiv5122067922 div.yiv5122067922attach-table {
width:400px;}
#yiv5122067922 div.yiv5122067922file-title a, #yiv5122067922
div.yiv5122067922file-title a:active, #yiv5122067922
div.yiv5122067922file-title a:hover, #yiv5122067922
div.yiv5122067922file-title a:visited {
text-decoration:none;}
#yiv5122067922 div.yiv5122067922photo-title a,
#yiv5122067922 div.yiv5122067922photo-title a:active,
#yiv5122067922 div.yiv5122067922photo-title a:hover,
#yiv5122067922 div.yiv5122067922photo-title a:visited {
text-decoration:none;}
#yiv5122067922 div#yiv5122067922ygrp-mlmsg
#yiv5122067922ygrp-msg p a span.yiv5122067922yshortcuts {
font-family:Verdana;font-size:10px;font-weight:normal;}
#yiv5122067922 .yiv5122067922green {
color:#628c2a;}
#yiv5122067922 .yiv5122067922MsoNormal {
margin:0 0 0 0;}
#yiv5122067922 o {
font-size:0;}
#yiv5122067922 #yiv5122067922photos div {
float:left;width:72px;}
#yiv5122067922 #yiv5122067922photos div div {
border:1px solid
#666666;height:62px;overflow:hidden;width:62px;}
#yiv5122067922 #yiv5122067922photos div label {
color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}
#yiv5122067922 #yiv5122067922reco-category {
font-size:77%;}
#yiv5122067922 #yiv5122067922reco-desc {
font-size:77%;}
#yiv5122067922 .yiv5122067922replbq {
margin:4px;}
#yiv5122067922 #yiv5122067922ygrp-actbar div a:first-child {
margin-right:2px;padding-right:5px;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg {
font-size:13px;font-family:Arial, helvetica, clean,
sans-serif;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg table {
font-size:inherit;font:100%;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg select,
#yiv5122067922 input, #yiv5122067922 textarea {
font:99% Arial, Helvetica, clean, sans-serif;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg pre, #yiv5122067922
code {
font:115% monospace;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg * {
line-height:1.22em;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg #yiv5122067922logo {
padding-bottom:10px;}
#yiv5122067922 #yiv5122067922ygrp-msg p a {
font-family:Verdana;}
#yiv5122067922 #yiv5122067922ygrp-msg
p#yiv5122067922attach-count span {
color:#1E66AE;font-weight:700;}
#yiv5122067922 #yiv5122067922ygrp-reco
#yiv5122067922reco-head {
color:#ff7900;font-weight:700;}
#yiv5122067922 #yiv5122067922ygrp-reco {
margin-bottom:20px;padding:0px;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
li a {
font-size:130%;text-decoration:none;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
li {
font-size:77%;list-style-type:square;padding:6px 0;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
ul {
margin:0;padding:0 0 0 8px;}
#yiv5122067922 #yiv5122067922ygrp-text {
font-family:Georgia;}
#yiv5122067922 #yiv5122067922ygrp-text p {
margin:0 0 1em 0;}
#yiv5122067922 #yiv5122067922ygrp-text tt {
font-size:120%;}
#yiv5122067922 #yiv5122067922ygrp-vital ul li:last-child {
border-right:none !important;
}
#yiv5122067922
?
|
Here is what I have there:
DoButton( 24 )
DoButton( 23 )
DoButton( 22 )
Code "G53 G0 X0 Y0 Z0"
While IsMoving()
Wend
Nothing changed. I still have to hit "GO TO ZERO"
Do you see anything wrong?
Regards,
Troy
From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Thursday, February 19, 2015 10:40 AM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
Add it to the END of the Ref All Home script.
Gerry
_____
From: "testfly@... [mach1mach2cnc] <mailto:testfly@...%20[mach1mach2cnc]> " <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Thursday, February 19, 2015 9:54:37 AM
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
Hi Gerry,
Not sure where the Homing micro is.
I added it to the script onto the REF ALL HOME button and the machine will rapid to X 0 and then slowly move to hit the home switches and back off. I then still have to hit the GO TO ZERO for the X axis to stop where I want it to.
Did I put the suggested script in the wrong place?
What might I be doing wrong if that should work?
Thanks,
Troy
From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 10:57 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
Add this to the end of your homing macro:
Code "G53 G0 X0 Y0 Z0"
While IsMoving()
Wend
Gerry
On 2/18/2015 7:46 PM, testfly@... [mach1mach2cnc] wrote:
That helped.
I set the back-off to -.050 and after HOMING I hit "GO TO ZERO" and the machine stopes where I wanted.
Thanks.
I think I am good now. I just have to remember to hit "GO TO ZERO" so the axis is not parked on the limit switch plungers.
Regards,
Troy
From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 7:15 PM
To: mach1mach2cnc@... <mailto:mach1%20mach2cnc@...>
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
Hi Troy, If you set the back off DRO to -.35", and then command the X to go to zero, you would be +.35 away from the switches. It would be nice if you can get all that into the homing command. But I am not sure of the syntax required, and if it could all be issued in the homing routine.
--------------------------------------------
On Wed, 2/18/15, testfly@atla ntic.net <mailto:testfly@...> [mach1mach2cnc] <mach1mach2cnc@...> wrote:
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
To: mach1mach2cnc@...
Date: Wednesday, February 18, 2015, 6:20 PM
One more HOMING
question. I can set how far
off the switch the Axis are after Homing.However, A closer
look and all I am really doing is setting the "Machine
DRO" to read a value.In fact the axis
backs OFF the same amount and the Machine DRO gets set to
the value I have entered. Is this correct or
am I missing something? The reason I ask is
because I would like the axis to back OFF the switch .350
and I can't figure out how to get the axis to move off
just a little more after hitting the switch when
HOMING.It moves OFF enough
to un-trigger the switches. But I would like it to back OFF
just a bit more. Thanks,Troy From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 4:15
PM
To:
mach1mach2cnc@...
Subject: RE: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE OK I
understand. So, I removed the
check and I removed the last line in the script which was
"DoButton( 25 )" . It seems to be
working right. Anything else I
should take a look at? Thanks again for the
help. Regards,Troy From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
< p style="margin-bottom:12.0pt;" data="margin-bottom: 12.0pt;">Sent: Wednesday, February 18, 2015
3:46 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE If
home slave with master is checked, then the A axis is not
using it's home switch, and no autosquaring will occur.
To edit the homing macro, go to Operator > Edit button
script, and click the home button. From: "testfly@... <mailto:testfly@...%0b[mach1mach2cnc]>
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
3:42:44 PM
Subject: RE:
[mach1mach2cnc] Homing with "X" axis with
"A" motor as the SLAVE Thanks! I did not have a
check in the "Home
Slave with Master"So I checked that
box to see what happened and That seems to have solved my
problem. Also I did not find
the homing script to
remove the command that's homing the A axis.
But, I
think I am OK now.&n
bsp;Thanks for the quick
response. Regards,Troy From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, Febru ary 18, 2015
2:42 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE
Uncheck "Home Slave with
Master" in General Config, and edit your homing script
to remove the command that's homing the A
axis. From: "testfly@... <mailto:testfly@...%0b[mach1mach2cnc]>
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
2:30:04 PM
Subject: [mach1mach2cn c]
Homing with "X" axis wi th "A" motor as
the SLAVE I have now added switches so I can HOME
and SQUARE the X axis.I have a question about how this should
work. Here is what I get when I hit "REF
ALL HOME" The X axis moves in the - direction
(AS EXPECTED)When
the Home Switches are hit each motor ("X" and
"A") back OFF the switches (AS
EXPECTED)Then the
"A" axis motor moves back to the switch and
triggers it a second time and agai n it backs OFF and stops.
(NOT SURE THIS IS CORRECT OR NOT) Is there something I am
missing? Thanks,Troy
#yiv5122067922 #yiv5122067922 --
#yiv5122067922ygrp-mkp {
border:1px solid #d8d8d8;font-family:Arial;margin:10px
0;padding:0 10px;}
#yiv5122067922 #yiv5122067922ygrp-mkp hr {
border:1px solid #d8d8d8;}
#yiv5122067922 #yiv5122067922ygrp-mkp #yiv5122067922hd {
color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px
0;}
#yiv5122067922 #yiv5122067922ygrp-mkp #yiv5122067922ads {
margin-bottom:10px;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad {
padding:0 0;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad p {
margin:0;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad a {
color:#0000ff;text-decoration:none;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc {
font-family:Arial;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc #yiv5122067922hd {
margin:10px
0px;font-weight:700;font-size:78%;line-height:122%;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc .yiv5122067922ad {
margin-bottom:10px;padding:0 0;}
#yiv5122067922 #yiv5122067922actions {
font-family:Verdana;font-size:11px;padding:10px 0;}
#yiv5122067922 #yiv5122067922activity {
background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}
#yiv5122067922 #yiv5122067922activity span {
font-weight:700;}
#yiv5122067922 #yiv5122067922activity span:first-child {
text-transform:uppercase;}
#yiv5122067922 #yiv5122067922activity span a {
color:#5085b6;text-decoration:none;}
#yiv5122067922 #yiv5122067922activity span span {
color:#ff7900;}
#yiv5122067922 #yiv5122067922activity span
.yiv5122 067922underline {
text-decoration:underline;}
#yiv5122067922 .yiv5122067922attach {
clear:both;display:table;font-family:Arial;font-size:12px;padding:10px
0;width:400px;}
#yiv5122067922 .yiv5122067922attach div a {
text-decoration:none;}
#yiv5122067922 .yiv5122067922attach img {
border:none;padding-right:5px;}
#yiv5122067922 .yiv5122067922attach label {
display:block;margin-bottom:5px;}
#yiv5122067922 .yiv5122067922attach label a {
text-decoration:none;}
#yiv512 2067922 blockquote {
margin:0 0 0 4px;}
#yiv5122067922 .yiv5122067922bold {
font-family:Arial;font-size:13px;font-weight:700;}
#yiv5122067922 .yiv5122067922bold a {
text-decoration:none;}
#yiv5122067922 dd.yiv5122067922last p a {
font-family:Verdana;font-weight:700;}
#yiv5122067922 dd.yiv5122067922last p span {
margin-right:10px;font-family:Verdana;font-weight:700;}
#yiv5122067922 dd.yiv5122067922last p
span.yiv5122067922yshortcuts {
margin-right:0;}
#yiv5122067 922 div.yiv5122067922attach-table div div a {
text-decoration:none;}
#yiv5122067922 div.yiv5122067922attach-table {
width:400px;}
#yiv5122067922 div.yiv5122067922file-title a, #yiv5122067922
div.yiv5122067922file-title a:active, #yiv5122067922
div.yiv5122067922file-title a:hover, #yiv5122067922
div.yiv5122067922file-title a:visited {
text-decoration:none;}
#yiv5122067922 div.yiv5122067922photo-title a,
#yiv5122067922 div.yiv5122067922photo-title a:active,
#yiv5122067922 div.yiv5122067922photo-title a:hover,
#yiv5122067922 div.yiv5122067922photo-title a:visited {
text-decoration:none;}
#yiv5122067922 div#yiv5122067922ygr p-mlmsg
#yiv5122067922ygrp-msg p a span.yiv5122067922yshortcuts {
font-family:Verdana;font-size:10px;font-weight:normal;}
#yiv5122067922 .yiv5122067922green {
color:#628c2a;}
#yiv5122067922 .yiv5122067922MsoNormal {
margin:0 0 0 0;}
#yiv5122067922 o {
font-size:0;}
#yiv5122067922 #yiv5122067922photos div {
float:left;width:72px;}
#yiv5122067922 #yiv5122067922photos div div {
border:1px solid
#666666;height:62px;overflow:hidden;width:62px;}
#yiv5122067922 #yiv 5122067922photos div label {
color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}
#yiv5122067922 #yiv5122067922reco-category {
font-size:77%;}
#yiv5122067922 #yiv5122067922reco-desc {
font-size:77%;}
#yiv5122067922 .yiv5122067922replbq {
margin:4px;}
#yiv5122067922 #yiv5122067922ygrp-actbar div a:first-child {
margin-right:2px;padding-right:5px;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg {
font-size:13px;font-family:Arial, helvetica, clean,
sans-serif;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg table {
font-size:inherit;font:100%;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg select,
#yiv5122067922 input, #yiv5122067922 textarea {
font:99% Arial, Helvetica, clean, sans-serif;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg pre, #yiv5122067922
code {
font:115% monospace;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg * {
line-height:1.22em;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg #yiv5122067922logo {
padding-bottom:10px;}
#yiv5122067922 #yiv5122067922ygrp-msg p a {
font-famil y:Verdana;}
#yiv5122067922 #yiv5122067922ygrp-msg
p#yiv5122067922attach-count span {
color:#1E66AE;font-weight:700;}
#yiv5122067922 #yiv5122067922ygrp-reco
#yiv5122067922reco-head {
color:#ff7900;font-weight:700;}
#yiv5122067922 #yiv5122067922ygrp-reco {
margin-bottom:20px;padding:0px;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
li a {
font-size:130%;text-decoration:none;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
li {
font-size:77%;list-style-type:square;padding:6px 0;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
ul {
margin:0;padding:0 0 0 8px;}
#yiv5122067922 #yiv5122067922ygrp-text {
font-family:Georgia;}
#yiv5122067922 #yiv5122067922ygrp-text p {
margin:0 0 1em 0;}
#yiv5122067922 #yiv5122067922ygrp-text tt {
font-size:120%;}
#yiv5122067922 #yiv5122067922ygrp-vital ul li:last-child {
border-right:none !important;
}
#yiv5122067922
|
Move the code : Code "G53 G0 X0 Y0 Z0"
To after Wend
From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Thursday, February 19, 2015 10:19 AM
To: mach1mach2cnc@...
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
Here is what I have there:
DoButton( 24 )
DoButton( 23 )
DoButton( 22 )
Code "G53 G0 X0 Y0 Z0"
While IsMoving()
Wend
Nothing changed. I still have to hit "GO TO ZERO"
Do you see anything wrong?
Regards,
Troy
From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Thursday, February 19, 2015 10:40 AM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
Add it to the END of the Ref All Home script.
Gerry
_____
From: "testfly@... [mach1mach2cnc] <mailto:testfly@...%20[mach1mach2cnc]> " <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Thursday, February 19, 2015 9:54:37 AM
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
Hi Gerry,
Not sure where the Homing micro is.
I added it to the script onto the REF ALL HOME button and the machine will rapid to X 0 and then slowly move to hit the home switches and back off. I then still have to hit the GO TO ZERO for the X axis to stop where I want it to.
Did I put the suggested script in the wrong place?
What might I be doing wrong if that should work?
Thanks,
Troy
From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 10:57 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
Add this to the end of your homing macro:
Code "G53 G0 X0 Y0 Z0"
While IsMoving()
Wend
Gerry
On 2/18/2015 7:46 PM, testfly@... [mach1mach2cnc] wrote:
That helped.
I set the back-off to -.050 and after HOMING I hit "GO TO ZERO" and the machine stopes where I wanted.
Thanks.
I think I am good now. I just have to remember to hit "GO TO ZERO" so the axis is not parked on the limit switch plungers.
Regards,
Troy
From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 7:15 PM
To: mach1mach2cnc@... <mailto:mach1%20mach2cnc@...>
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
Hi Troy, If you set the back off DRO to -.35", and then command the X to go to zero, you would be +.35 away from the switches. It would be nice if you can get all that into the homing command. But I am not sure of the syntax required, and if it could all be issued in the homing routine.
--------------------------------------------
On Wed, 2/18/15, testfly@atla ntic.net <mailto:testfly@...> [mach1mach2cnc] <mach1mach2cnc@...> wrote:
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
To: mach1mach2cnc@...
Date: Wednesday, February 18, 2015, 6:20 PM
One more HOMING
question. I can set how far
off the switch the Axis are after Homing.However, A closer
look and all I am really doing is setting the "Machine
DRO" to read a value.In fact the axis
backs OFF the same amount and the Machine DRO gets set to
the value I have entered. Is this correct or
am I missing something? The reason I ask is
because I would like the axis to back OFF the switch .350
and I can't figure out how to get the axis to move off
just a little more after hitting the switch when
HOMING.It moves OFF enough
to un-trigger the switches. But I would like it to back OFF
just a bit more. Thanks,Troy From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 4:15
PM
To:
mach1mach2cnc@...
Subject: RE: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE OK I
understand. So, I removed the
check and I removed the last line in the script which was
"DoButton( 25 )" . It seems to be
working right. Anything else I
should take a look at? Thanks again for the
help. Regards,Troy From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
< p style="margin-bottom:12.0pt;" data="margin-bottom: 12.0pt;">Sent: Wednesday, February 18, 2015
3:46 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE If
home slave with master is checked, then the A axis is not
using it's home switch, and no autosquaring will occur.
To edit the homing macro, go to Operator > Edit button
script, and click the home button. From: "testfly@... <mailto:testfly@...%0b[mach1mach2cnc]>
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
3:42:44 PM
Subject: RE:
[mach1mach2cnc] Homing with "X" axis with
"A" motor as the SLAVE Thanks! I did not have a
check in the "Home
Slave with Master"So I checked that
box to see what happened and That seems to have solved my
problem. Also I did not find
the homing script to
remove the command that's homing the A axis.
But, I
think I am OK now.&n
bsp;Thanks for the quick
response. Regards,Troy From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, Febru ary 18, 2015
2:42 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE
Uncheck "Home Slave with
Master" in General Config, and edit your homing script
to remove the command that's homing the A
axis. From: "testfly@... <mailto:testfly@...%0b[mach1mach2cnc]>
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
2:30:04 PM
Subject: [mach1mach2cn c]
Homing with "X" axis wi th "A" motor as
the SLAVE I have now added switches so I can HOME
and SQUARE the X axis.I have a question about how this should
work. Here is what I get when I hit "REF
ALL HOME" The X axis moves in the - direction
(AS EXPECTED)When
the Home Switches are hit each motor ("X" and
"A") back OFF the switches (AS
EXPECTED)Then the
"A" axis motor moves back to the switch and
triggers it a second time and agai n it backs OFF and stops.
(NOT SURE THIS IS CORRECT OR NOT) Is there something I am
missing? Thanks,Troy
#yiv5122067922 #yiv5122067922 --
#yiv5122067922ygrp-mkp {
border:1px solid #d8d8d8;font-family:Arial;margin:10px
0;padding:0 10px;}
#yiv5122067922 #yiv5122067922ygrp-mkp hr {
border:1px solid #d8d8d8;}
#yiv5122067922 #yiv5122067922ygrp-mkp #yiv5122067922hd {
color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px
0;}
#yiv5122067922 #yiv5122067922ygrp-mkp #yiv5122067922ads {
margin-bottom:10px;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad {
padding:0 0;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad p {
margin:0;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad a {
color:#0000ff;text-decoration:none;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc {
font-family:Arial;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc #yiv5122067922hd {
margin:10px
0px;font-weight:700;font-size:78%;line-height:122%;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc .yiv5122067922ad {
margin-bottom:10px;padding:0 0;}
#yiv5122067922 #yiv5122067922actions {
font-family:Verdana;font-size:11px;padding:10px 0;}
#yiv5122067922 #yiv5122067922activity {
background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}
#yiv5122067922 #yiv5122067922activity span {
font-weight:700;}
#yiv5122067922 #yiv5122067922activity span:first-child {
text-transform:uppercase;}
#yiv5122067922 #yiv5122067922activity span a {
color:#5085b6;text-decoration:none;}
#yiv5122067922 #yiv5122067922activity span span {
color:#ff7900;}
#yiv5122067922 #yiv5122067922activity span
.yiv5122 067922underline {
text-decoration:underline;}
#yiv5122067922 .yiv5122067922attach {
clear:both;display:table;font-family:Arial;font-size:12px;padding:10px
0;width:400px;}
#yiv5122067922 .yiv5122067922attach div a {
text-decoration:none;}
#yiv5122067922 .yiv5122067922attach img {
border:none;padding-right:5px;}
#yiv5122067922 .yiv5122067922attach label {
display:block;margin-bottom:5px;}
#yiv5122067922 .yiv5122067922attach label a {
text-decoration:none;}
#yiv512 2067922 blockquote {
margin:0 0 0 4px;}
#yiv5122067922 .yiv5122067922bold {
font-family:Arial;font-size:13px;font-weight:700;}
#yiv5122067922 .yiv5122067922bold a {
text-decoration:none;}
#yiv5122067922 dd.yiv5122067922last p a {
font-family:Verdana;font-weight:700;}
#yiv5122067922 dd.yiv5122067922last p span {
margin-right:10px;font-family:Verdana;font-weight:700;}
#yiv5122067922 dd.yiv5122067922last p
span.yiv5122067922yshortcuts {
margin-right:0;}
#yiv5122067 922 div.yiv5122067922attach-table div div a {
text-decoration:none;}
#yiv5122067922 div.yiv5122067922attach-table {
width:400px;}
#yiv5122067922 div.yiv5122067922file-title a, #yiv5122067922
div.yiv5122067922file-title a:active, #yiv5122067922
div.yiv5122067922file-title a:hover, #yiv5122067922
div.yiv5122067922file-title a:visited {
text-decoration:none;}
#yiv5122067922 div.yiv5122067922photo-title a,
#yiv5122067922 div.yiv5122067922photo-title a:active,
#yiv5122067922 div.yiv5122067922photo-title a:hover,
#yiv5122067922 div.yiv5122067922photo-title a:visited {
text-decoration:none;}
#yiv5122067922 div#yiv5122067922ygr p-mlmsg
#yiv5122067922ygrp-msg p a span.yiv5122067922yshortcuts {
font-family:Verdana;font-size:10px;font-weight:normal;}
#yiv5122067922 .yiv5122067922green {
color:#628c2a;}
#yiv5122067922 .yiv5122067922MsoNormal {
margin:0 0 0 0;}
#yiv5122067922 o {
font-size:0;}
#yiv5122067922 #yiv5122067922photos div {
float:left;width:72px;}
#yiv5122067922 #yiv5122067922photos div div {
border:1px solid
#666666;height:62px;overflow:hidden;width:62px;}
#yiv5122067922 #yiv 5122067922photos div label {
color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}
#yiv5122067922 #yiv5122067922reco-category {
font-size:77%;}
#yiv5122067922 #yiv5122067922reco-desc {
font-size:77%;}
#yiv5122067922 .yiv5122067922replbq {
margin:4px;}
#yiv5122067922 #yiv5122067922ygrp-actbar div a:first-child {
margin-right:2px;padding-right:5px;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg {
font-size:13px;font-family:Arial, helvetica, clean,
sans-serif;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg table {
font-size:inherit;font:100%;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg select,
#yiv5122067922 input, #yiv5122067922 textarea {
font:99% Arial, Helvetica, clean, sans-serif;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg pre, #yiv5122067922
code {
font:115% monospace;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg * {
line-height:1.22em;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg #yiv5122067922logo {
padding-bottom:10px;}
#yiv5122067922 #yiv5122067922ygrp-msg p a {
font-famil y:Verdana;}
#yiv5122067922 #yiv5122067922ygrp-msg
p#yiv5122067922attach-count span {
color:#1E66AE;font-weight:700;}
#yiv5122067922 #yiv5122067922ygrp-reco
#yiv5122067922reco-head {
color:#ff7900;font-weight:700;}
#yiv5122067922 #yiv5122067922ygrp-reco {
margin-bottom:20px;padding:0px;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
li a {
font-size:130%;text-decoration:none;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
li {
font-size:77%;list-style-type:square;padding:6px 0;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
ul {
margin:0;padding:0 0 0 8px;}
#yiv5122067922 #yiv5122067922ygrp-text {
font-family:Georgia;}
#yiv5122067922 #yiv5122067922ygrp-text p {
margin:0 0 1em 0;}
#yiv5122067922 #yiv5122067922ygrp-text tt {
font-size:120%;}
#yiv5122067922 #yiv5122067922ygrp-vital ul li:last-child {
border-right:none !important;
}
#yiv5122067922
|
Thanks. You were correct! It Homes and stops right where I want it to now. ? Regards, Troy ? ? ?
toggle quoted message
Show quoted text
From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Thursday, February 19, 2015 12:20 PM
To: mach1mach2cnc@...
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE? ? Move the code : Code "G53 G0 X0 Y0 Z0"
To after Wend
From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Thursday, February 19, 2015 10:19 AM
To: mach1mach2cnc@...
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
Here is what I have there:
DoButton( 24 )
DoButton( 23 )
DoButton( 22 )
Code "G53 G0 X0 Y0 Z0"
While IsMoving()
Wend
Nothing changed. I still have to hit "GO TO ZERO"
Do you see anything wrong?
Regards,
Troy
From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Thursday, February 19, 2015 10:40 AM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
Add it to the END of the Ref All Home script.
Gerry
_____
From: "testfly@... [mach1mach2cnc] " <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Thursday, February 19, 2015 9:54:37 AM
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
Hi Gerry,
Not sure where the Homing micro is.
I added it to the script onto the REF ALL HOME button and the machine will rapid to X 0 and then slowly move to hit the home switches and back off. I then still have to hit the GO TO ZERO for the X axis to stop where I want it to.
Did I put the suggested script in the wrong place?
What might I be doing wrong if that should work?
Thanks,
Troy
From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 10:57 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
Add this to the end of your homing macro:
Code "G53 G0 X0 Y0 Z0"
While IsMoving()
Wend
Gerry
On 2/18/2015 7:46 PM, testfly@... [mach1mach2cnc] wrote:
That helped.
I set the back-off to -.050 and after HOMING I hit "GO TO ZERO" and the machine stopes where I wanted.
Thanks.
I think I am good now. I just have to remember to hit "GO TO ZERO" so the axis is not parked on the limit switch plungers.
Regards,
Troy
From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 7:15 PM
To: mach1mach2cnc@... <mailto:mach1%20mach2cnc@...>
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
Hi Troy, If you set the back off DRO to -.35", and then command the X to go to zero, you would be +.35 away from the switches. It would be nice if you can get all that into the homing command. But I am not sure of the syntax required, and if it could all be issued in the homing routine.
--------------------------------------------
On Wed, 2/18/15, testfly@atla ntic.net <mailto:testfly@...> [mach1mach2cnc] <mach1mach2cnc@...> wrote:
Subject: RE: [mach1mach2cnc] Homing with "X" axis with "A" motor as the SLAVE
To: mach1mach2cnc@...
Date: Wednesday, February 18, 2015, 6:20 PM
One more HOMING
question. I can set how far
off the switch the Axis are after Homing.However, A closer
look and all I am really doing is setting the "Machine
DRO" to read a value.In fact the axis
backs OFF the same amount and the Machine DRO gets set to
the value I have entered. Is this correct or
am I missing something? The reason I ask is
because I would like the axis to back OFF the switch .350
and I can't figure out how to get the axis to move off
just a little more after hitting the switch when
HOMING.It moves OFF enough
to un-trigger the switches. But I would like it to back OFF
just a bit more. Thanks,Troy From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, February 18, 2015 4:15
PM
To:
mach1mach2cnc@...
Subject: RE: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE OK I
understand. So, I removed the
check and I removed the last line in the script which was
"DoButton( 25 )" . It seems to be
working right. Anything else I
should take a look at? Thanks again for the
help. Regards,Troy From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
< p style="margin-bottom:12.0pt;" data="margin-bottom: 12.0pt;">Sent: Wednesday, February 18, 2015
3:46 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE If
home slave with master is checked, then the A axis is not
using it's home switch, and no autosquaring will occur.
To edit the homing macro, go to Operator > Edit button
script, and click the home button. From: "testfly@...
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
3:42:44 PM
Subject: RE:
[mach1mach2cnc] Homing with "X" axis with
"A" motor as the SLAVE Thanks! I did not have a
check in the "Home
Slave with Master"So I checked that
box to see what happened and That seems to have solved my
problem. Also I did not find
the homing script to
remove the command that's homing the A axis.
But, I
think I am OK now.&n
bsp;Thanks for the quick
response. Regards,Troy From: mach1mach2cnc@...
[mailto:mach1mach2cnc@...]
Sent: Wednesday, Febru ary 18, 2015
2:42 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Homing with
"X" axis with "A" motor as the
SLAVE
Uncheck "Home Slave with
Master" in General Config, and edit your homing script
to remove the command that's homing the A
axis. From: "testfly@... <mailto:testfly@...%0b[mach1mach2cnc]>
[mach1mach2cnc]" <mach1mach2cnc@...>
To: mach1mach2cnc@...
Sent: Wednesday, February 18, 2015
2:30:04 PM
Subject: [mach1mach2cn c]
Homing with "X" axis wi th "A" motor as
the SLAVE I have now added switches so I can HOME
and SQUARE the X axis.I have a question about how this should
work. Here is what I get when I hit "REF
ALL HOME" The X axis moves in the - direction
(AS EXPECTED)When
the Home Switches are hit each motor ("X" and
"A") back OFF the switches (AS
EXPECTED)Then the
"A" axis motor moves back to the switch and
triggers it a second time and agai n it backs OFF and stops.
(NOT SURE THIS IS CORRECT OR NOT) Is there something I am
missing? Thanks,Troy
#yiv5122067922 #yiv5122067922 --
#yiv5122067922ygrp-mkp {
border:1px solid #d8d8d8;font-family:Arial;margin:10px
0;padding:0 10px;}
#yiv5122067922 #yiv5122067922ygrp-mkp hr {
border:1px solid #d8d8d8;}
#yiv5122067922 #yiv5122067922ygrp-mkp #yiv5122067922hd {
color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px
0;}
#yiv5122067922 #yiv5122067922ygrp-mkp #yiv5122067922ads {
margin-bottom:10px;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad {
padding:0 0;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad p {
margin:0;}
#yiv5122067922 #yiv5122067922ygrp-mkp .yiv5122067922ad a {
color:#0000ff;text-decoration:none;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc {
font-family:Arial;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc #yiv5122067922hd {
margin:10px
0px;font-weight:700;font-size:78%;line-height:122%;}
#yiv5122067922 #yiv5122067922ygrp-sponsor
#yiv5122067922ygrp-lc .yiv5122067922ad {
margin-bottom:10px;padding:0 0;}
#yiv5122067922 #yiv5122067922actions {
font-family:Verdana;font-size:11px;padding:10px 0;}
#yiv5122067922 #yiv5122067922activity {
background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}
#yiv5122067922 #yiv5122067922activity span {
font-weight:700;}
#yiv5122067922 #yiv5122067922activity span:first-child {
text-transform:uppercase;}
#yiv5122067922 #yiv5122067922activity span a {
color:#5085b6;text-decoration:none;}
#yiv5122067922 #yiv5122067922activity span span {
color:#ff7900;}
#yiv5122067922 #yiv5122067922activity span
.yiv5122 067922underline {
text-decoration:underline;}
#yiv5122067922 .yiv5122067922attach {
clear:both;display:table;font-family:Arial;font-size:12px;padding:10px
0;width:400px;}
#yiv5122067922 .yiv5122067922attach div a {
text-decoration:none;}
#yiv5122067922 .yiv5122067922attach img {
border:none;padding-right:5px;}
#yiv5122067922 .yiv5122067922attach label {
display:block;margin-bottom:5px;}
#yiv5122067922 .yiv5122067922attach label a {
text-decoration:none;}
#yiv512 2067922 blockquote {
margin:0 0 0 4px;}
#yiv5122067922 .yiv5122067922bold {
font-family:Arial;font-size:13px;font-weight:700;}
#yiv5122067922 .yiv5122067922bold a {
text-decoration:none;}
#yiv5122067922 dd.yiv5122067922last p a {
font-family:Verdana;font-weight:700;}
#yiv5122067922 dd.yiv5122067922last p span {
margin-right:10px;font-family:Verdana;font-weight:700;}
#yiv5122067922 dd.yiv5122067922last p
span.yiv5122067922yshortcuts {
margin-right:0;}
#yiv5122067 922 div.yiv5122067922attach-table div div a {
text-decoration:none;}
#yiv5122067922 div.yiv5122067922attach-table {
width:400px;}
#yiv5122067922 div.yiv5122067922file-title a, #yiv5122067922
div.yiv5122067922file-title a:active, #yiv5122067922
div.yiv5122067922file-title a:hover, #yiv5122067922
div.yiv5122067922file-title a:visited {
text-decoration:none;}
#yiv5122067922 div.yiv5122067922photo-title a,
#yiv5122067922 div.yiv5122067922photo-title a:active,
#yiv5122067922 div.yiv5122067922photo-title a:hover,
#yiv5122067922 div.yiv5122067922photo-title a:visited {
text-decoration:none;}
#yiv5122067922 div#yiv5122067922ygr p-mlmsg
#yiv5122067922ygrp-msg p a span.yiv5122067922yshortcuts {
font-family:Verdana;font-size:10px;font-weight:normal;}
#yiv5122067922 .yiv5122067922green {
color:#628c2a;}
#yiv5122067922 .yiv5122067922MsoNormal {
margin:0 0 0 0;}
#yiv5122067922 o {
font-size:0;}
#yiv5122067922 #yiv5122067922photos div {
float:left;width:72px;}
#yiv5122067922 #yiv5122067922photos div div {
border:1px solid
#666666;height:62px;overflow:hidden;width:62px;}
#yiv5122067922 #yiv 5122067922photos div label {
color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}
#yiv5122067922 #yiv5122067922reco-category {
font-size:77%;}
#yiv5122067922 #yiv5122067922reco-desc {
font-size:77%;}
#yiv5122067922 .yiv5122067922replbq {
margin:4px;}
#yiv5122067922 #yiv5122067922ygrp-actbar div a:first-child {
margin-right:2px;padding-right:5px;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg {
font-size:13px;font-family:Arial, helvetica, clean,
sans-serif;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg table {
font-size:inherit;font:100%;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg select,
#yiv5122067922 input, #yiv5122067922 textarea {
font:99% Arial, Helvetica, clean, sans-serif;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg pre, #yiv5122067922
code {
font:115% monospace;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg * {
line-height:1.22em;}
#yiv5122067922 #yiv5122067922ygrp-mlmsg #yiv5122067922logo {
padding-bottom:10px;}
#yiv5122067922 #yiv5122067922ygrp-msg p a {
font-famil y:Verdana;}
#yiv5122067922 #yiv5122067922ygrp-msg
p#yiv5122067922attach-count span {
color:#1E66AE;font-weight:700;}
#yiv5122067922 #yiv5122067922ygrp-reco
#yiv5122067922reco-head {
color:#ff7900;font-weight:700;}
#yiv5122067922 #yiv5122067922ygrp-reco {
margin-bottom:20px;padding:0px;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
li a {
font-size:130%;text-decoration:none;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
li {
font-size:77%;list-style-type:square;padding:6px 0;}
#yiv5122067922 #yiv5122067922ygrp-sponsor #yiv5122067922ov
ul {
margin:0;padding:0 0 0 8px;}
#yiv5122067922 #yiv5122067922ygrp-text {
font-family:Georgia;}
#yiv5122067922 #yiv5122067922ygrp-text p {
margin:0 0 1em 0;}
#yiv5122067922 #yiv5122067922ygrp-text tt {
font-size:120%;}
#yiv5122067922 #yiv5122067922ygrp-vital ul li:last-child {
border-right:none !important;
}
#yiv5122067922
[Non-text portions of this message have been removed]
|
Here is the video on the completed project.? Thanks for the help.
| | | | | | This feature is not available right now. Please try again later. | | | | Preview by Yahoo | | | ?
|
