开云体育

----- Original Message -----
From: Jacques Lambert
To: mach1mach2cnc@...
Sent: Tuesday, June 06, 2006 10:23 PM
Subject: [mach1mach2cnc] lazy cam


question
lazycam v1.0
if i have dxf file with line or point no problem the router go down to
cut line and go up make the point go down go up so when it moving to
the next one the router is up

N2 (Tuesday, June 06, 2006)
N3 G90G80G40G91.1
N4 M3 S100
G0G98 Z1.0000
N5 G81 X56.5875 Y138.8875 Z0.0000 R0.0000 F100.00
N6 M3 S100
N7 G80
N8 G0 X204.5875
N9 Z0.0000
N10 G1 F60.00
N11 X208.5875 F100.00
N12 M3 S100
N13 G0 Z1.0000
N14 X211.3372 Y112.6623
N15 Z0.0000
N16 G1 F60.00
N17 Y61.8623 F100.00
N18 X185.9372 Y36.4623
N19 X84.3372
N20 X58.9372 Y61.8623
N21 Y112.6623
N22 M3 S100
N23 G0 Z1.0000
N24 X0.0000 Y153.1750
N25 Z0.0000
N26 G1 F60.00
N27 X263.1750 F100.00
N28 Y21.5875
N29 G2 X241.5875 Y0.0000 I-21.5875 J-0.0000
N30 G1 X21.5875
N31 G2 X0.0000 Y21.5875 I-0.0000 J21.5875
N32 G1 Y153.1750
N33 G0 Z1.0000
N34 M5 M9
N35 X0.0 Y0.0
N36 G40G80M30

lazycam 2,53
it forget line x and y move by time router go up or down

N2 (Tuesday, June 06, 2006)
N3 G90G80G40G90.1
N4 G0 X56.5875 Y138.8875 Z1.0000
N5 M3 S0
N6 Z0.1000
N7 G1 Z0.0000 F60.00
G0G98 Z1.0000
N8 G81 X56.5875 Y138.8875 Z0.0000 R0.1000 F100.00
N9 G0 X204.5875
N10 Z0.1000
N11 G1 Z0.0000 F60.00
N12 G80
N13 X208.5875 F100.00
N14 G0 X211.3372 Y112.6623 Z1.0000
N15 Z0.1000
N16 G1 Z0.0000 F60.00
N17 Y61.8623 F100.00
N18 X185.9372 Y36.4623
N19 X84.3372
N20 X58.9372 Y61.8623
N21 Y112.6623
N22 G0 X0.0000 Y153.1750 Z1.0000
N23 Z0.1000
N24 G1 Z0.0000 F60.00
N25 X263.1750 F100.00
N26 Y21.5875
N27 G2 X241.5875 Y0.0000 I241.5875 J21.5875
N28 G1 X21.5875
N29 G2 X0.0000 Y21.5875 I21.5875 J21.5875
N30 G1 Y153.1750
N31 G0 Z1.0000
N32 M5 M9
N33 X0.0 Y0.0
N34 G40G80M30

line n13 missins g1

thank you
jacques