开云体育

Jack: Yes, the 5volts shoudl bea good calibrator to get 10 volts out as that would be the same as 100% PWM.. Art www.artofcnc.ca

Hi: Lets take these one at a time... You must be using microstep drivers of some sort. Perhaps 10 uStep woudl explain it. Then it woudl be 2000 * 16 = 32000 / inch/ This would also explain the 30

I have the same problem. Have tried every rotational diameter that I can imagine. wrote: machine) having stepper GREAT

I to have Same Problem see "Problem with Abit Board" I noticed when testing if I start clicking and draging on screen about once per second It crankes up to 77,000PPS wow! but is it real or is the

I've got something very strange going on. I have a BP clone that had a Anilam crusader servo system on it. I replaced the crusader logic stuff with 3 rutex 0-10v analog drives and Mach2. I'm still

Hello Art and others I have had this problem for a long time (I thought it was my machine) but I have just set up an other machine. The problem that I am having is when I try to run the A axis

Exact stop fixed it, but the machine moves in small jerky movements that shake my 2000lb router table. Which version implements Plasma CV mode? I'm using Version 1.9 and I don't see it. Thanks...Ross

Hi Art I emailed Vlad and he said that I should have revision 2 on the firmware. I checked it with the rutex program and he's correct. He also said that my drives should work with your tuning program.

I like it. It would solve the overwrite problem. The other option it to make a copy of the macro and leave it in the Macro folder. Then when you upgrade you only have to copy that macro back as M3 or

Sure Ed here it is. I use it on my mill and engraver. I make some templates for the pantograph guys. They need a reversed type to engrave in a mold for plastic injection. I do it in DeskEngrave and

Hi Art! The HPGL imort seems to work fine for mee (even if its simple), it would be great if you add pen to tool capability (when you have the time). Thanks Christer -----Ursprungligt meddelande-----

I have a more fundamental problem with macros ... they keep getting overwritten. Also .. I find the having 2 sets of them M5.tis M5.mis a bit weird ... I'm forever editing the worng one .. what I

I got a problem like this after an M30 this WE but was not sure it was me or a mach2 problem. It was a Z move at the beginning of the file (but i had no Z move at the beginning of the program, just at

Donald, in version 4.0 VBscript is in Radian (and i hope it will stay because i wrote a big macro with it). Olivier.

I have made the circuit in the files section to make 0-10 V Out from the PWM voltage. Can I test with 5V in and adjust the output to 10V? Can I use 12 V from the Computer or do I need a seperate

Hi Scott, Do you have a URL to the site? Best, Ed Gilbert Gilbert Engineered Systems 632 Warrenton-Embro Road Macon, NC 27551 252-257-0539

Hello, I'm new to this stuff so bear with me. I'm running a 1.73 Ghz AMD XP2100 with WinXP and Mach2. I've also got an old, low performance stepper kit from Super-tech. The control 'box' uses L298

Andy: churning for 20 minutes now! Kill it. Somethings wrong with the file. Or the type of HPGL or something. Too many favours of all these laguage type. Open the HPGL in a word editor, it shoudl be

Get a copy of Deskengrave. It is freeware and turns true type into .dxf or Gcode. Works very well and the price is right. Scott Scott Neldon Pearland, Texas