开云体育

Hi Everyone, I haven’t used my mill in a while. I’m trying to cut some stock and noticed that my spindle is running backwards. How can I change the direction of rotation? Thanks, Terry Sent from

Mach3 does not support tool wear comp. It does nothing with that value.

I understand that there is a tool wear compensation available in Mach3 but? the only place I can find anything associated with this concept? is on the tool table where it say Diam. wear. I am using

I am curious as to why you want to use MeshCam overRhinoCam? What version of RC do you have and do you pay yearly maintenance? Cheers, Terry

There is a mach3 mm and inch post in the Meshcam post directory when installed Sent from Mail for Windows Sent: Friday, February 17, 2023 10:31 PM To: [email protected] Subject: [MachCNC] Rhino3D,

Hi Let me ask a quick question without doing my due diligence or research before hand I'm currently working with Rhino3D, RhinoCAM Mill, and Mach3 on a home made CNC.? I've heard good things about

Hi Brian, I sent it to your support email.. if I got it right you should get it Thanks Gary Sent from Mail for Windows Sent: Thursday, February 2, 2023 8:27 AM To: [email protected] Subject: Re:

Hi Gary, You can send the Profile off list and I can have a stab at getting it to work. You like that idea? thanks Brian ______________________________ Brian Barker Engineering / Development ArtSoft |

Hi Brian, I gave that a shot but didn’t seem to change anything, still 2 dialogs when m6 used in a g code file, but it did add a new issue now when I boot mach4 the dialog is run when the screen

Hi Gary, Your really really close! Here is what I did to make it so you can't have more than one dialog show at a time. In your PLC script: local inst = mc.mcGetInstance("M6 Toolchange Dialog")

Umm it's sort of right but could use a bit of help :) Let me see what I can do to help you out ! Thanks Brian ______________________________ Brian Barker Engineering / Development ArtSoft | Newfangled

Hi Brian, Below is the code I have running at this time it works form the MDI right loads the dialog when I run the m6 script and I can exit it fine.. But when I run it in the g code the dialog runs

We will keep out if this for now ... I sent you an example ______________________________ Brian Barker Engineering / Development ArtSoft | Newfangled Solutions Livermore Falls, Maine (USA)

Hi Gary, Sorry I was coaching robotics and had a comp this weekend so I was flat out :) The good news is that I had 2 more teems qualify for states! Okay back to work! We don't have any real library

Thank you Chuck! Have a great weekend, Bertho Sent: 27 January, 2023 0:27 To: [email protected] Subject: Re: [MachCNC] Where are the Mach4 screen sets? Bertho, Here’s the Laser screen you’re

Brian, I am in the process of moving Mach4 to a new computer and at the same time switching to the Ethernet Smooth Stepper. When I have it up and running I will get you feedback. Have a great weekend,

Brian, I tried out the mcFileHoldAquire() in the m6 file it did stop there and I was able to jog the axis’s. But after jogging I hit cycle start button it seemed to get stuck on the next statement

Ok thanks Brian, I will try them out, by in the screen not sure what screen the frame? The screen load script ? What my real goal was or is, I have a rotary tool changer, I am checking the m6 macro to

Brian, As it turned out, this laser screen was not intended for the way I am using my laser. So I cannot provide you any comments on it. Keep up the good work, Chuck -sent from my iphone --

If you are playing with the new screen that we have for laser I would like to know what your thoughts are on it. We are getting ready for this to go out into the wild! Brian