开云体育

Hi Olivier, The big problem is that I can't find anything that has changed. I am using the PostThreadMessage Windows API call to send key strokes to Mach2. For some reason it takes a very long time

Thanks Olivier. I had already seen this one. I'm looking into it.. Thanks, Art www.artofcnc.ca

Don: There is only a G2002, the G2003 is a concept in the works as an expanded 2002. The 2002 stated as a cube and ended up a slab, but its the same function. Mach2 supports only the slab version of

Ron: plate? Ive got a full interactive Mill program ready to run as soon as I can get an OCX. As of next version the OCX should work fine. Just tested it last night from VB, no trouble. Will release

Hi Bill: Yes, G61 and G64 switch between the modes. The lookahead is automatically allocated in the latest versions. There is a DRO to set it, I'll have to look it up, but it won't increase your

Hi Les: I have reluctantly added it to the list in a high spot. (I'll curse you as I plod though all the boilerplate code required... ;) )] Art www.artofcnc.ca

So what is the feature that will allow Mach2 to be successful coutour software? I cannot find anything in the manual that even refers to a "look Ahead" feature (G51) nor anything that resembles it.

Mike: What you need is a probe command and a probe input (Digitize). In a macro button, you would put a code( " G32 Z -10 " ) // set the Z number to the max you want to drop in case of error. If the

Robin: Change your screen setting to 1024x768 and set your DPI (in the advanced settings) to 96, then all will show. Thanks, Glad to hear the special bat file fixed you up. (Glad I wrote that, saves

This sounds like about the same macro that I use for THC. You will need a DRO to enter the switch travel distance, other that that I could modify it to do what you want. You would want to have the

Hi Bill, and thanks for replying. I am actually using an omron micro switch with my plunger system attached to it. Typically these switches have given between .005" and .010" which is more than

Mike, What type of switch are you using, how is it interfaced to the control, and what kind of accuracy are you looking to achieve? Bill wrote: length know machine

Art, i just installed 4.0 release, and was surprised to see the homing was not working perfectly like before. it's not a big problem but : After X referencing for example, the DRO should give X = 272

Anyone???????????---I am not opposed to begging if necessary!! :) Mike In mach1mach2cnc@..., "guzakaka" <nonna01@e...> wrote: how get the at

It's funny i just sent you a message about this. But why is it so slow now ? the keygrabber debug version just before the release version was quite good for timings... i always use it. Olivier.

Les, the keygrabber version in mach2 version 4.0 don't work for the joystick mode. there is a very very long delay (about 2 secondes) as i said to you some times ago. Each time i upgrade mach2 i have

Hi all, I have just released the latest version of KeyGrabber, V3.9. There are only a couple of minor bug fixes ompared to the version supplied with Mach2. Olivier, I am afraid that joystick response

Art, I used the .BAT file and it worked!!! But... my monitor does not show all the screen...I have tried all of the "set" files but to no avail...any suggestions? Robin PS...I need to learn how to

That is what I use on my 50"*98" gantry that I just finished. I use servo motors and Gecko 340's. The servo motors are mounted to 50:1 gear reducers with .375 pitch belt 1" wide on 18 tooth pulleys

wrote: still 4.0 ooops.... Wrong person....sheeesh!(as I knock myself on the head)