开云体育

I know this must sound dumb, but aperantly I locked the settings. I am not able to change any of the settings. I assume that that is the function of the Lock menu item. When I click unlock, it asks

Hi Derek, Are you using the quill for the Z axis? Best, Ed Gilbert Gilbert Engineered Systems 632 Warrenton-Embro Road Macon, NC 27551 252-257-0539

Brian: Can you give me a snippet as a test. For example I just did the following test. G0X100A10 G0X0A0 I set the X accel at max, the A at very slow accel. When I start it , it slowly accelerates then

If any one is interested, here's a nice keyboard http://cgi.ebay.com/ws/eBayISAPI.dll? ViewItem&category=4706&item=2790087754 , I bought two, nice HD piece, they have a joystick mouse and a nice

logic This when exact stop trouble. The Factor.. Art I fear this is not the case I have tested in EXACT stop and In CV modes. the problem is that you are missing an accel. some where?? I set the

Hi: 25,000 khz, but my timer likes to stick around 8000 - 9000 khz while on the diagnostics page within Mach2 itself. When I run the OCX tester, it seems to jump around in the 100,000 to 500,000

Yes it will help me too. Jim

important and that is now so close I can smell Yes, lockdown of Version 4.0 is getting very close. Actual bugs are almost non-existant. Not to say they don't exist, but as a comparison I think 4.0 is

Hello Art, Thanks for the reply, it means alot to have help available for this stuff. It certainly 'appears' that there is some micro stepping taking place. Using a 1 to 1 drive, and .0625" lead (16

Steve: Hmm, damn. Well, glad its gone, but I'll keep an eye on the XML's for a bit.. Art www.artofcnc.ca

Art, Fixed - I replaced the xml with my backup copy and the problem has gone! -- Steve Blackmore

Brian: I thikn that version 4 is what you need. In version 4.0 in the logic config there is a checkbox to turn on the angualr decrimination. This when set to 91 degree's will force the angualr change

Hi John: display just totaly screwed up? Art I tried the apic version setting in bios nothing happened. But if the computer is busy doing something PPS seams to jump right up there? This is a DMA

Hi: to over shoot by .010" and then slowly returns to where it is supposed to be. The DRO readouts don't relect this change. If I use the incremental jog and make a move as little as .0005 it still

Hi Ross: I would advise you move up to version 4.0. There are selection there to help with this issue.. Thanks, Art www.artofcnc.ca

Thanks :) the obvious concern is 'legacy' issues I guess? Don't panic too much over this one, I think lockdown for 4.0 is more important and that is now so close I can smell it. I think maybe after

Derek: Yes, thats it. I neglected to put in a way to allow for a new Printer port address. Open Mach2 and select the Rutex.xml file as the profile. Then change the Printer port address to your port

Christer: When I have time, I will add it... Thanks, Art www.artofcnc.ca http://docs.yahoo.com/info/terms/

Robin: You've convinced me, its coming..., though I have a couple of concerns... Art www.artofcnc.ca

Olivier: I won't (can't anyway) change it. I haven't a clue how yet, though there may be a setting in the VB engine somewhere... Art www.artofcnc.ca