Do you have servos or steppers ?
Olivier.
toggle quoted message
Show quoted text
-----Message d'origine-----
De : rrc62_03782 [mailto:rrc62@...]
Envoy¨¦ : jeudi 11 mars 2004 20:05
? : mach1mach2cnc@...
Objet : [mach1mach2cnc] Re: Mach2 Missed steps but not????
"Real mach2 problem or mechanical resonance.... ?? Anyone with similar
strange gain steps on Z axis, - direction ?"
I had a problem with the Z two days ago. I lost steps in the other
direction. At the
end of the program, the tool was about .050 higher than it should have
been.
I was running identical parts in a fixture. I re-zeroed the machine and
ran another
20+ parts with no problem. What ever is going on seems to be
intermittent. Other
seem to be having similar issues, so I don't think it's just us.
Ross
Yahoo! Groups Sponsor
ADVERTISEMENT
----------------------------------------------------------------------------
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
b.. To unsubscribe from this group, send an email to:
mach1mach2cnc-unsubscribe@...
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]