开云体育

Hello everybody, I'm working on a schematic and encounter a "singular matrix" error. I know there are as many cause than people in the mankind, but I would like to have advices to avoid this sort of things. I'm aware that there are a lot of maths in the background too :'( Thanks a lot in advance for your help.

Hi, : I have uploaded the file named '20250318_bootstrap time-based triangle-wave generator for frequency sweep.asc' at temp. /g/LTspice/files/Temp/20250318_bootstrap%20time-based%20triangle-wave%20generator%20for%20frequency%20sweep.asc The idea is to generate a sawtooth waveform for jittering in PWM. But at the top peak, Vout dips, it shows flaw of discontinuity. The image showing the phenomenon. /g/LTspice/photo/301350/3897404?p=Created%2C%2C%2C20%2C2%2C0%2C0 If you could share some opinions to fix it, I much appreciate you very well. Wish you all happy & healthy. Best regards.

Hello everyone, I am designing an Analog Front-End for biosignals (EMGs). You can find the corresponding circuit here /g/LTspice/files/EMG_AFE.asc. I have selected INA317 as an instrumentation amplifier and I am trying to design a 2nd order low pass filter after the InAmp stage. The problem is at Capacitor C3. If I remove the capacitor and connect the path to ground, the circuit behavior is not as expected. However the classic Sallen Key circuit topology does not contain this capacitor. Should someone has any idea why is it necessary in this particular configuration with the INA317, I would be very grateful. Thank you in advance.

You will soon be told this forum is for LTspice-specific questions, not for electronic design. :{) But I would suggest: https://www.analog.com/en/resources/glossary/non-inverting-op-amp.html Dave

I want make multiple runs of a model which will output a waveform to a .wav file. Each run will step a parameter, all of which works as intended, except, I need to change the filename each time. This illustrates the intent, but not surprisingly, errors off on the last line: .step param stp 1 6 1 .param Vcon table({stp}, 1,-2, 2, -1, 3, 0, 4, 1, 5, 2, 6,3) .wave {Stp}.wav 16 44.1k V(Out) Any suggested better syntax? I’ve tried several… Thanks! Dave

LTspice 24.1.5 I thought AKO could be used with NJF. Content of BJT_mod.txt: ........... .model NJ AKO:NJ20 NJF() .model NJ20 NJF ( VTO=-2.5 BETA=1m LAMBDA=0.01 RD=100 RS=50 + CGD=2p CGS=5p IS=1e-14 PB=0.7 FC=0.5 ) .......... Error produced in log: BJT_mod.txt(43): Syntax error: Unexpected input. .model NJ AKO:NJ20 NJF() ^^ I guess not? I tried removing NJF() from AKO statement but it didn't help.

I just wandered into files/Temp to see what was new but can only sort by "Type" or by "Name". I'd bookmarked /g/LTspice/files/Temp?p=updated,,,20,2,0,0 so I can get them in new-to-old order, but (being lazy) I usually just got to Temp and choose sort by date. Is this intentional or should I make my bookmark much easier to hit? Many thanks, Donald.

Hello, in some models I found some double "*": what's the meaning of this operator ? Thanks a lot in advance.

Hello everyone, I am trying to simulate Four switch non inverting buck boost converter with two different genesic switches G3R60MT07J and G3R75MT12J. The library files are encrypted, so I cannot make any changes there. I have tried various methods like increasing time step and tolerances, skipping initial operating point solution etc. but nothing is working for me. Any suggestions regarding how to resolve this issue?

it's a lot of time that a looking for a a model ltspice lm317 and lm337 made by the same hand. Someone could kyndly tell me where I can find them? Many thanks Andrea

Hello, Recently I compiled several models created by another group's member into one single library. Moreover, I slightly modified them for my need but I think it could be useful for other people here. I tried to contact the original author on his own email to ask his authorization, but I didn't have his reply yet. Moreover, it seems that he didn't come on the group since a long time. His there a rules on the forum for this kind of situation, or am I free to publish here without his authorization (but by mentioning his name however...) ? Thanks a lot in advance for your advices, Pascal

Sorry for FAQ. How can I renumber the parts number? I heard "shift+ctrl+alt+R" is available. But no change appear. Hidehiko JA9MAT.

Hi, : May I ask a question about to generate the surge waveform using time equation & s-equation, on how to do that in LTspice ? For example, I asked the ChatGPT, about the 6.0KV surge waveform of time domain, then same as the s-domain equation, but I don't quite know how to express the s-equation exactly. I presume maybe some initial condition needed to be given, but brain twisted. And not sure if that's supported in BV's laplace expression, often it's for transfer function. In the following, it shows the equation for time & s as well. Then since I can't upload the file , (the policy of ... some confidential reason, though I don't know what needed to be confidential), I beg your pardon, please allow me to paste the .asc content in the tail if this thread. Have a nice day. Thank you very much. Best regards. the image about equation description here. (I don't know how to insert picture correctly here, it said me don't have the privilege.) /g/LTspice/photo/301279/3895874?p=Created%2C%2C%2C20%2C2%2C0%2C0 Version 4 SHEET 1 1120 680 WIRE 0 112 0 96 WIRE 192 112 0 112 WIRE 672 112 672 96 WIRE 864 112 672 112 WIRE 0 208 0 192 WIRE 192 208 192 192 WIRE 672 208 672 192 WIRE 864 208 864 192 FLAG 0 208 0 FLAG 192 208 0 FLAG 0 96 V_time FLAG 672 208 0 FLAG 864 208 0 FLAG 672 96 V_s SYMBOL bv 0 96 R0 WINDOW 3 -274 178 Left 2 SYMATTR InstName B1 SYMATTR Value V=6000*( exp(-3.5e6*time) - exp(-0.14e6*time) ) SYMBOL res 176 96 R0 SYMATTR InstName R1 SYMATTR Value 1 SYMBOL bv 672 96 R0 WINDOW 3 -274 178 Left 2 SYMATTR InstName B2 SYMATTR Value V=1*u(time) laplace=6000*( 1/(s+3.5e6) - 1/(s+0.14e6) ) SYMBOL res 848 96 R0 SYMATTR InstName R2 SYMATTR Value 1 TEXT 148 -90 Left 2 !.tran 200u startup

Something burped, v24.0.12 I miss it Man, ADI has really ruined lots of features

Hello ,I am trying to test a voltage regulator by re[lacing a steady resistor with some sort of varying resistor. Given the circuit in the attached Zip file , what kind of "resistor" you reccomend? /g/LTspice/files/Temp/regulator.zip Thanks.

I’m trying to adapt and use the model in LampModel.zip, uploaded by analogspiceman last September. The test circuit supplied works fine for a 120VAC lamp. I want to adapt it to a small pilot lamp, as a stabilizer for a Wein network oscillator. There are a number of parameters defined in the model, but except foe ambient temperature, not well explained. I commented the .param block and passed them externally, and that works exactly the same, as expected. Now, can anyone suggest what needs “tuning”, to get about 600 ohms at 10mA, after warm-up? Ka, ambient temp (Kelvin) is easy. Kc looks like design voltage (120RMS), but doesn’t really act like it; left alone. Kf seems to be a heat transfer coefficient, maybe good for warmup timing, but slightly changes stable resistance. CTf is a coupling factor from Tambient to Tfilament, sets warmup timing; left alone. RTf is filament resistance, but changing that parameter makes only a very small difference to the preset, ~150 ohms. Thanks, Dave

Hello ... I need a BV source to use a TABLE to look up a response. This works if the controlling variable is a .param ( Static for the full sim) but I need the BV to be dynamic ( Use the TABLE lookup in response to a changing voltage and respond with the voltage result ) I have tried to do this, but no success yet. I uploaded LTspice_TableTest.zip to the temp folder. Thank you so very much for any help you can provide!! JD

Thanks for your help!

I am trying to work out some old schematic and circuit issues and am looking for a model for the old LM121 opamp. Anyone have such a thing? I found the LM118, as I can use the LTSpice LT118A model. Now for the front end.

Hello, I have a YIG device which has two inputs. Tune input at 2V puts my YIG to 9.4Ghz and 10dBm FM input is current input which moves the output 100Mhz each mili ampere. I can measure the transfer function as a table also to see the effect of each input on the output Is there some bahvior model in LTspice which could help me represent this device in simulation? Thanks.