Group member "flyback" (massey2) uploaded a schematic earlier today "LLC to compare.asc".? ?But she or he may have forgotten to read the group's guidelines.? Files should be uploaded into the "Temp" directory only.? (I fixed that for you.)? Uploaded files must be accompanied by a message from you, telling us why you uploaded it, or what is your question.
?
The file she or he uploaded does not run without errors.? There were mistakes in the schematic.? I corrected some (not all) of them, and uploaded "LLC to compare AI1.asc".
?
But it is still not right.? "flyback" attempted to make parameters depend on a voltage in the circuit, and that can never work.? Parameter values are fixed during any simulation run, and their values must be known before the simulation begins.? I substituted a dummy value for the first one that was supposed to track a voltage.
?
If you want to make the parameters (not .PARAMs but circuit element parameters) depend on your voltage at node EA, you must find another way to do it.
?
The extensive use of Rser with your voltage sources is somewhat troubling.? Attempting to power an op-amp that way, with no bypass capacitors, might lead to failure, although Rser was small enough so it's probably OK.? Also be more careful with your typing.? Numbers such as "0..01" might not work.? (I fixed that too.)
?
Andy
?
