开云体育

Using the BI worked. thanx!

think of it this way - the loud speaker is like a solenoid https://en.wikipedia.org/wiki/Solenoid#Electromechanical_solenoid or a variac

flpierson wrote: "What I need to do is take the FFT of the average current of the three wires. How do I go about doing that?" First, define what you mean by "the average current of the three wires." I

Add to your schematic a B type current source whose current is the sum of the three line currents. Connect a resistive load to it to prevent its voltage becoming infinite. Then take the FFT of the B

I have a 3 phase twisted set wire radiating noise. I've constructed what I believe if a sufficient filter to knock the noise down to acceptable levels. What I need to do is take the FFT of the average

Hi Andy, Thank you very much for your very quick reply and taking your time to explain details. I will continue with this query after my personal errand. Best regards, Eric LTspice@...>

Thanks for taking the time to explain Andy. Joe McCarron

Eric wrote: "I found the MOC308x phototriac circuit simulation (solved) from the htm files. I tried to RUN it but it won't." I downloaded it (it's the same file that was uploaded here around a month

I'm having this same issue. Reproduced on my Macbook Pro running Sierra (10.12.6), and my iMac running El Capitan (10.11.6). It is not a mouse issue - it's a graphics-layer issue. Whatever canvas

Hello Andy, I found a part MOC308x and uploaded into my library. I couldn't make it work. Maybe I have not done it correctly. But I also found a circuit containing the same part that has been "solved"

Hello John, Pls kindly wish to consult. I found the MOC308x phototriac circuit simulation (solved) from the htm files. I tried to RUN it but it won't. I uploaded the file named MOC308xSimulation for

Joe asked, where to install a library of additional parts for LTspice. "Do I install in LTSpice in "program files" or my working directory users/me/LTSpice ?" If you are using LTspice XVII, then the

Hello, I want to download and use a digital library. Do I install in LTSpice in "program files" or my working directory users/me/LTSpice ? I followed the instructions and installed the library into

I suggest also searching with these search terms: "opto-triac" "optotriac" "opto triac: and even simply "opto" if you are willing to filter through the many results. There are a few instances of

Conin wrote: "I have 2 circuits in a single simulation file. I would like to compare the output noise between the circuits on a single plot. I'd like to do this without post processing .RAW files in

Hello John, Thank you very much. I will try that.. Best regards, Eric LTspice@...> wrote:

Have you downloaded and saved all_files.htm from the web site? Open it in your browser and search for phototriac. John Woodgate OOO-Own Opinions Only J M Woodgate and Associates www.woodjohn.uk

Hi, I'm new to this group and LTSpice simulation as well. So far it has been very helpful to the design of my circuit. Now i need to add a photo triac. I tried looking at LTSpice available libraries

Hello, I have 2 circuits in a single simulation file. I would like to compare the output noise between the circuits on a single plot. I'd like to do this without post processing .RAW files in the

While the link below might be more than you are looking for, the author takes some pains to SPICE-model eddy current effects in a LS motor assy: