开云体育

Hello See also the help with key words Schematic Editing Regards PhB

.step and .param belong on the schematic. You can use the keyboard short cut “S” to bring up a dialog box to enter or paste text into. After entering the text, you have to click on the schematic

Hello jammanfr, You have overlooked that th RC-models use a different structure. Please take a look to my uploaded file. soa_therm1a.asc https://groups.yahoo.com/neo/groups/LTspice/files/%20Temp/

Thank you guys, sorry about the delay in response. I read through the help and learn how to click and drag the voltage probe to read the voltage across a circuit. But I cannot do that in DC operating

Thank you for you answer Andy ! The first list comes from the file SOAtherm-NMOS.lib (in ./sub). It's the model created by Dan Eddleman http://www.linear.com/doclist/?au=Dan%20Eddleman. The second one

Marc wrote: "I'd like to use the SOAtherm with an user defined MOSFET. ... Does somebody know the relation between these values ?" I don't understand your question. Do you know what the things that

Hello, I'd like to use the SOAtherm with an user defined MOSFET. Unfortunately, i can't get the relation between the DanTherm model and the manufacturer model. Example: FDB3632 DanTherm model:

Hello, I'd like to use the SOAtherm with an user defined MOSFET. Unfortunately, i can't get the connection between the DanTherm model in the file SOAtherm-NMOS.lib and the one in the datasheet/spice

Ralf wrote: "However, that file does not seem to be there any more(?). Only found the symbol LM359ns.asy -" If you found the symbol LM359ns.asy, then you should have found the model too, LM359NS.mod.

Hello, I just looked. It's still in the Files-section since 10 years, but all old links will be broken since two years, because we have ../neo/... in the path due to a change from Yahoo.

In message <mq21ei+16aeqet@...>, dated Fri, 7 Aug 2015, "ralf@... [LTspice]" <LTspice@...> writes: There is a Pspice model at: http://www.ti.com/product/LM359/toolssoftware

Hello, I've found an old thread / post pointing to the Files section: Files > Lib > LM359 However, that file does not seem to be there any more(?). Only found the symbol LM359ns.asy - guess there

Hello Bordodynov You wrote: "I am sorry. I used the Russian word "podporog" instead of the words subthreshold current. " No problem : that was clear :-) PhB

Hello Bordodynov You're allright with your version of LTspice. Earlier versions accepted only subthres parameter ( not ksubthres) but with bad results. By the way the help has not been corrected or

Hello PhB. I considered everything correctly and no error messages, no. I'm using LTspice version 4.23e (Jul 28, 2015). Bordodynov. 07.08.2015, 09:41, "basier.philippe@... [LTspice]"

Hello Bordodynov Your uploaded file Ksubthres.asc has a typo and gives the following error message: .model test vdmos(rd=0 rs=0 vto=1 kp=1 ksubthres=0.1);--> * Unrecognized parameter "ksubthres" --

I am sorry. I used the Russian word "podporog" instead of the words subthreshold current. I would like to say that For my surprise it turned out that the subthreshold current change in "e = 2.71828

Hello Patricio Cohen. See Research_of_model_Vdmos.zip in /Temp. I figured with two parameters of the model. But subthreshold mode current only partially. My approximation is close to the results of

To my knowledge, you can't, but there was someone some time ago working on a least-squares algorithm and he used the .WAVE command to write and then WAVEFILE for voltage(/current) source to read the

alan.revera wrote: "I uploaded my file named "Thermal and voltage measurement.asc" in "Temp" folder. I want to see: 1) Whether there is a way to simulate the DC voltage across node A and node B." Yes.