开云体育

Hello, You have to number the "Netlist Order" in the symbol pins in the order 1 to n, e. g. 1,2,3,4,5,6,7,8,9 regardless of the pin names/numbers in the ".subckt ...". Best regards, Helmut

Ok, replaced the .MOD file to my own working dir. And included the following: .INCLUDE C:\Users\...\LTSPICE lib\LM13700.MOD Now LTSpice is telling me there's a port mismatch between "lm13700" and

Opened and saved it with notepad++, also tried deleting all the commented stuff/weburls. Still got the error. [IMG]http://i.imgur.com/6U4T1PU.png[/IMG]

In message <6939C6D9E5727A428B0A00DBB4359A3226AB9E8E@...>, dated Tue, 10 Dec 2013, Ray Merewether <ray.merewether@...> writes: Indeed, but that might not produce a 'Cannot

mummiewikkel wrote: Did the following: Don't put your models anywhere in LTspice's libraries. Put it in your own working directory, which should not be in your computer's "&#92;Program Files" (or

M.Rakesh Sharma wrote: I am designing a circuit in LTSPICE. I need a variable resistor to use it Are you trying to use a varistor (a resistor with a nonlinear resistance, its resistance depends on the

Don’t use notepad. It screws up the LTspice preferred end of line character. Search the message archives for “Notepad” Sent: Tuesday, December 10, 2013 8:03 AM To: LTspice@...

I get the error message, maybe I'm forgetting something, but lost my way trying to solve this error last couple of hours. Did the following: 1. Made LM13700.MOD file in notepad (path:

Mike, You can attach a cursor to the plot and drag it where ever you want.. Right click on the trace label. The display is in the lower right and it is easy to see the numbers change as you move the

Hi. Files >Lib >cmp> standard.bjt 2.zip I would not have high hopes of these models. Model is very suspicious. Test them. Bordodynov.

---In ltspice@..., <405a82e5@...> wrote: Thanks, Frank, The Tian method uses equations that are far too long and error-prone. I would never be able to find a typo. Also, it requires an

Rick, I tried that. The slope around zero is very shallow and you have to look at the cursor parameters in the bottom left corner of the display. Even so, I could not get consistent results. For

Hello. Does anyone have ltspice models for transistors BD829 and BD830 ?

Thanks, Frank, The Tian method uses equations that are far too long and error-prone. I would never be able to find a typo. Also, it requires an additional subcircuit that has to be included in each

ok.everything solved.thank you all for your help.

---In ltspice@..., <rsrakeshbharath@...> wrote: ... I try to use the variable resistor(XVAR) from LTSPICE library. What kind of resistor? You used a varistor, is that you intended? Look

thx a lot

---In LTspice@..., <405a82e5@...> wrote: Rick, How did you manage to get three digits of resolution? I tried using the cursor but could not locate 0dB or measure the phase angle that

Dear all, I am designing a circuit in LTSPICE. I need a variable resistor to use it in my circuit. I try to use the variable resistor(XVAR) from LTSPICE library. After designing the circuit after

ronw6wo wrote: To gain some FFT experience I checked the bandwidth of individual I don't use FFTs regularly, but some things you should be doing include: Disable waveform compression (.option