开云体育

I'm trying to use the dflop part in a simple circuit and am having difficulty getting it to work. +-----------+ 0-6v square wave --------|>CLK Q |--- 1v solid out?? GND----| D Q'| +-----------+ Both

Jon, You probably want to make the Model and Instance name visible in the .asy file and nothing else. THE VALUE SHOULD BE LEFT BLANK in both the .asy and instance, unless you want to add parameters to

I guess I'm asking this because the .ASY I currently use automatically displays the Value attribute. But the new drop-down for the SpiceModel only changes the SpiceModel attribute (perhaps, as it

On Tue, 25 Mar 2003 15:19:26 -0800 (PST), you wrote: >Jon, > >> In the above case, it would be nice if LT Spice >> would put a "Select Subcircuit" button on the >> dialog box which comes up when I

> Hi there, > > > LTSpice is really fun to work with. Assuming that Mike likes to get > feedback, I would like to make some suggestions for enhancements of the > waveform viewer, mainly for

<david.pariseau@s...> wrote: Hello Dave, sorry, but YAHOO shorted my e-mail address so that you had no chance to fully read it. HelmutSennewald"at"t-online.de Replace "at" with @. You can use my Yahoo

Hello, I'm new to this group and I don't have experience working with Spice models. Someone can please help me or point me to the right direction so I can make a TRIAC model? If there's some

Helmut, What's your email address? The one posted is truncated with ... Dave.

There's been some reorganization of the website that I use of SwCADIII/LTspice publication. Could you folks let me know if the menu item Tools=>Sync Release works for you. It should work from anywhere

Helmut, Yes you are correct, node 0 is global. Even if used in a subcircuit, it is global ground. You can't name the pin of a hierarchical symbol "0" and have that refer to the node "0" inside that

Steve, Thanks! Cool. Just the same, I don't think we should risk having a slogan like, "So easy to use even girls can use it." Yes, I we will be making it possible to have named plot setups and turn

Jon, Yes, this is something that's been needed for a long time. So I implemented it today. To use it make a symbol with prefix 'X'. Make ModelFile point to a library contianing subcircuits. Give the

<david.pariseau@s...> wrote: your errors Hello David, you can send me your circuit file(s) for testing. Please use the following e-mail address if you a

That's weird, the part is in an SOT-3 package w/ only 3 pins, but it seems that the 4th input is temperature??? I added this and commented out the Diode line and there are no errors now in simulation,

<david.pariseau@s...> wrote: Hello Dave, this model from Fairchild has 4 pins. Please add a 4th pin to your symbol. You can see that requirement in the model file. I tried this with success. *20=DRAIN

--- In LTspice@..., "Reinier Gerritsen" <r.gerritsen@c...> wrote: SNIP > - a way to store multiple analysis commands. If I use .tran and .ac > commands, only the parameters of the last one

I've read through past messages, the SwCAD help and such and attempted to add a 3rd party model for the FDN304P. It seems to find the model fine now, but I get the error "Too few parameters for

First let me congratulate the author(s) and those that support this software. It is really useful and easy to use. My daughter, who is an engineeing sophmore, has even started to use LTSpice for some

Thanks for the quick reply. I figured there had to be a way to do this. I will give it a whirl. --Brent