开云体育

I'm building a subcircuit of the OnSemi ECL 100LVEP111 clock buffer. I've decided to build the model as a schematic, in LTspice. The only model info I could find from OnSemi was a PDF app-note which

Hi, When running a monte carlo on a capacitor (in a filter design) I use the statement (copied from another LTSpice example): {mc(1n, tol)} for the capacitor, and the folowing SPICE directive commands

Hello Calvin, Depending on what you're trying to do, this alternative might help (no installation required):

Hi, I can?t get ltspdisto running. I?m not familiar with perl and such stuff and am afraid, that already the installation procedure failed. Is there an easy HowToDo explanation to get things going?

Hello,I am trying to use TD in my .meas script. I found that TD works only when I give some specific time (for example: 1.5m). But if I use another measurement instead (like the following .meas

Yes, the people here in this group are very friendly :-) best regards Leo ...

Perhaps I was a little harsh. I apologise. Yes, there is a little subtlety in getting at Vishay's models. This is what I do: 1. Browse to http://www.vishay.com/mosfets/single/n-channel/ - this is list

Sorry. model IRL630 VDMOS VTO=2.033 RS=0.03325 KP=21.514 RD=0.2711 RG=13.626 I CGDMAX=4.5n CGDMIN=5p CBD=2.43E-10 IS=6.09p Rb=0.0198 TT=4.563e-07 Cgs=978p Bordodynov. 23.09.2011, 09:15,

.model IRL630 VMOS VTO=2.033 RS=0.03325 KP=21.514 RD=0.2711 RG=13.626 I CGDMAX=4.50E-09 CGDMIN=5.00E-12 CBD=2.43E-10 IS=6.09e-12 Rb=0.0198 TT=4.563e-07 Cgs=9.78E-10 Bordodynov. 23.09.2011, 06:17,

Hi. The text of the model contains an error. Replace LEVEL = 5 ---> LEVEL = 3. Bordodynov. 23.09.2011, 01:28, "itisa3l" <gerrit@...>:

Yes, no question, de.sci.electronics, 1 thread there and You are feeling bad and stupid (but without reason :-) ) best regards, Leo

In fairness, wouldn't be the first place I would look for them either... Does somebody know a more user unfriendly website..? Cheers AG

Hello, Lewis You have made a lot of work ! But for why ? It is not easier than help in line ? Or : explain me, please. Bests regards, Philippe I still think that scad3.pdf was easier to read. Do you

Hi Tony, Are you sure you found SPICE models? I looked on Vishay and found only datasheets, no SPICE library models. I am pretty new to SPICE and was hoping a model already existed that I could just

I think there may be a small misunderstanding here. The question posed on the Yahoo group was: "...if Mike would put a direct link to the Wiki page in the LTspice Help tab?" That answer was: "I'd