开云体育

Andy and analogspiceman Thank you for your replies. Actually, I am not sure what I was thinking for the path length = Ie! It should of course be Pi * D where D = (Internal Diameter + External

...best* I can do Dhanabal: http://www.vishay.com/docs/81061/tsmf1000.pdf http://www.vishay.com/docs/81061/tsmf1000.pdf <---data sheet http://www.vishay.com/how/design-support-tools/

This is the case when first creating a source of noise, and then heroically fighting with them. It is better not to use a charge pump to get negative voltage. You can build tranimpedansny amplifier of

Hi. Everything works. * D:&#92;Program Files&#92;LTC&#92;LTspiceIV&#92;Draft323.asc V1 x 0 PWL(0 0 1m 1 2m 1 3m 0) TRIGGER V(n003)>1 V2 n003 0 PULSE(0 2 0 10m 10m 0 20m) V3 y 0 TRIGGER V(n003)>1 PWL(0

Am 04 Aug 2016 00:31:30 -0700 schrieb "t.obulesu@... [LTspice]" <LTspice@...>:

I have uploaded them with the name..New Microsoft PowerPoint Presentation(2).pdf

New Microsoft PowerPoint Presentation(2).pdf https://drive.google.com/open?id=0B_khpIBuCMVdbUVRWW85MHFmSXM https://drive.google.com/open?id=0B_khpIBuCMVdbUVRWW85MHFmSXM New Microsoft PowerPoint

Hi. The author of this opus (-Building of an optical lever system(1).pdf) or illiterate, or not very neat. Two schemes contain errors. While it may be disinformation. Bordodynov. 04.08.2016, 11:58,

does somebody have problem with this syntax? PWL (0 0 1m 1 2m 1 3m 0) TRIGGER V(n003)>1 the error msg I receieve is Unknown parameter "trigger"

To: ltspice@... From: LTspice@... Date: Tue, 2 Aug 2016 20:33:58 +0300 Subject: Re: [LTspice] Input impedance of an energy saving fluorescent lamp (CFL) 21W

Hi Bordodynov and all who helped, Thank you very much for the link and the files for the 13W, 120V AC Compact Fluorescent lamp. Unfortunately, I was looking for a more representative power (20W or

Hi Bordodynov and all who helped, Thank you very much for the link and the files for the 13W, 120V AC Compact Fluorescent lamp. Unfortunately, I was looking for a more representative power (20W or

To answer the OT question. The VN2222 was a fairly generic ~5 ohm,60V vfet by modern standards. Similar devices are things like the generic? 2N7000 series available from many vendors. So an sot23

Check the datasheet for the OPA 2846: Vn=1.2nV/sqrtHz, In=2.8pA/sqrtHz that means the OSI (optimum source impedance) is 428 ohms. The 100k resistors in the non-inverting inputs alone introduce 88uV

DON'T upload stuff anywhere but to the list web site. You can upload any sort of file to Files => Temp but big graphics files can go to Files => Big Files. With best wishes DESIGN IT IN! OOO – Own

Let me say why am looking for new design.. We are currently using the receiver module which has three stages: 1. Trans Impedance stage 2. High Pass filter (HPF) stage 3. Unity gain amplifier (just for

"I read that sentence is concluded there was a missing "n": as in either -> neither (or possibly have -> haven't)." Hmmm. Good point. This forum is especially vulnerable to that because people here

Andy wrote: "Hassan wrote: "I have found either the .lib file or the symbol !!! " That is good." I read that sentence is concluded there was a missing "n": as in either -> neither (or possibly have ->

Frank Mead wrote: "The 2n918, 2n5179, and the 2n2857 are still alive and well in Mouser database... they are still used..." Indeed they are listed. But did you check the prices and availability? At

Matt, I just looked at it, and it looks as if SOME of the LT1171's switching pulses are synchronized with the Vc input pin. Those ones have a narrower pulsewidth than the ones around them. Maybe it