开云体育

Yes, I thought I'd already tried that but apparently I hadn't. Sorry about that -- defective user, I guess. By the way, your help file describes this as: "You can edit the visibility of attributes

Various people are writing: Note that the background color is not printed. That is, you can set it to black in the color preferences dialog but it will still be white when you print it on white paper

Jon, I'd recommend using the graphical symbol editor. Attribute visibility is covered in help in Schematic Capture=>Creating New Symbols=> Attribute Visibility. --Mike

Mike, Thanks, that did the trick. Dave.

parameter Preferably documentation There

Okay, thanks. I'm beginning to get some of it. However, now this leads me to some more questions... First, I went back to look at a symbol you provided me, some time ago, for the PUJT (called

David, Place a gate on a schematic. Right mouse click on the body. Click on Value, Value2, SpiceLine, or SpiceLine2. Type Vhigh=5 in the box above the grid thing that looks like a spread sheet of the

> An: "'LTspice@...'" <LTspice@...> > > Von: "Schaich, Peter" <schaich.peter@...> > Datum: Wed, 26 Mar 2003 08:01:58 +0100 > Betreff:[LTspice] Suggestions for

Mike, I figured it was something like this. How do I set Vhigh=5 for a particular gate??? I was looking for something like this. It would have to be in a particular instance right, not at the

David, There's some special things you need to know about the gates. The gates don't need external power. If you want a gate to switch between 0 and 5 volts, give the gate a value of "Vhigh=5" Vlow

I'm trying to use the dflop part in a simple circuit and am having difficulty getting it to work. +-----------+ 0-6v square wave --------|>CLK Q |--- 1v solid out?? GND----| D Q'| +-----------+ Both

Jon, You probably want to make the Model and Instance name visible in the .asy file and nothing else. THE VALUE SHOULD BE LEFT BLANK in both the .asy and instance, unless you want to add parameters to

I guess I'm asking this because the .ASY I currently use automatically displays the Value attribute. But the new drop-down for the SpiceModel only changes the SpiceModel attribute (perhaps, as it

On Tue, 25 Mar 2003 15:19:26 -0800 (PST), you wrote: >Jon, > >> In the above case, it would be nice if LT Spice >> would put a "Select Subcircuit" button on the >> dialog box which comes up when I

> Hi there, > > > LTSpice is really fun to work with. Assuming that Mike likes to get > feedback, I would like to make some suggestions for enhancements of the > waveform viewer, mainly for

<david.pariseau@s...> wrote: Hello Dave, sorry, but YAHOO shorted my e-mail address so that you had no chance to fully read it. HelmutSennewald"at"t-online.de Replace "at" with @. You can use my Yahoo

Hello, I'm new to this group and I don't have experience working with Spice models. Someone can please help me or point me to the right direction so I can make a TRIAC model? If there's some

Helmut, What's your email address? The one posted is truncated with ... Dave.

There's been some reorganization of the website that I use of SwCADIII/LTspice publication. Could you folks let me know if the menu item Tools=>Sync Release works for you. It should work from anywhere

Helmut, Yes you are correct, node 0 is global. Even if used in a subcircuit, it is global ground. You can't name the pin of a hierarchical symbol "0" and have that refer to the node "0" inside that