开云体育

Hi. Files >Lib >cmp> standard.bjt 2.zip I would not have high hopes of these models. Model is very suspicious. Test them. Bordodynov.

---In ltspice@..., <405a82e5@...> wrote: Thanks, Frank, The Tian method uses equations that are far too long and error-prone. I would never be able to find a typo. Also, it requires an

Rick, I tried that. The slope around zero is very shallow and you have to look at the cursor parameters in the bottom left corner of the display. Even so, I could not get consistent results. For

Hello. Does anyone have ltspice models for transistors BD829 and BD830 ?

Thanks, Frank, The Tian method uses equations that are far too long and error-prone. I would never be able to find a typo. Also, it requires an additional subcircuit that has to be included in each

ok.everything solved.thank you all for your help.

---In ltspice@..., <rsrakeshbharath@...> wrote: ... I try to use the variable resistor(XVAR) from LTSPICE library. What kind of resistor? You used a varistor, is that you intended? Look

thx a lot

---In LTspice@..., <405a82e5@...> wrote: Rick, How did you manage to get three digits of resolution? I tried using the cursor but could not locate 0dB or measure the phase angle that

Dear all, I am designing a circuit in LTSPICE. I need a variable resistor to use it in my circuit. I try to use the variable resistor(XVAR) from LTSPICE library. After designing the circuit after

ronw6wo wrote: To gain some FFT experience I checked the bandwidth of individual I don't use FFTs regularly, but some things you should be doing include: Disable waveform compression (.option

Hi If you upload the your schematics, some will give you a comment, I think. Shiggy

To gain some FFT experience I checked the bandwidth of individual harmonics of a 14MHz square wave They show as having a bandwidth of 1.5 MHz which is ridiculous I have tried many simulation settings

Hello, The diode model is on Vishay's web page. .MODEL ETX06 D (IS=1.8807P N=2.5 BV=680 IBV=100U RS=34.2934M TT=26.4698N + CJO=175.851P VJ=700M M=459.591M EG=2.5 XTI=2 RL=25.4602MEG)) There is no

Mike, I enlarged the plot at the point where the gain crossed 0dB and used a cursor. Rick

In message <l84qps+nq6dbm@...>, dated Mon, 9 Dec 2013, aymen.dardouri1990@... writes: They may not be in the archives, but models of diodes and capacitors can be made from data

i hope that s.b does have the models, even if i think its a bit hard. in fact i only need 2 models: -diode: VISHAY VS-8ETX06FPPBF -capacitor: VISHAY MKP1840422104M

I use a self-made symbol, a small square with a zero-length pin in the middle, which simply netlists as a resistor of value {1/Gmin} to ground. ...Jim Thompson Web Site:

Hi, I'm trying to do some simulations with the LTC1844 and was surprised it's not included in the Linear devices included in my LTSpice. I did a search in "all_files.htm" that I down loaded and I

aymen.dardouri1990 wrote: i've been told the is a possibility to creat new spice models using only For the very simplest components (individual transistors, diodes), I think it is possible. I don't