开云体育

Sent: Wednesday, May 21, 2025 11:38 AM To: [email protected] Subject: Re: [HallicraftersRadios] 60A225 power/tone switch I found this in my junkbox. Would it work for you? Russ,N3CO

I found this in my junkbox.? Would it work for you? Russ,N3CO

Good to hear! Glad to help out! Dave KC3AM

Hello, Jim, I will buy the set of crystals complete. Contact me direct with details for purchase. Ed, WA9GQK

Greetins to the Group: I have the following SR-400 parts for sale. Pictures available upon request.?? Prices do NOT include shipping from 97367. Thanks for looking. -- Jim T. KB6GM

Greetings to the Group: I also would like to acquire a Hallicrafters part number 60A225 power/tone switch.?? However, I would like to find one with a defective AC switch.?? These switches are

Received the manuals yesterday. Thank you! They will make a perfect addition to my SX-117 / HT-44 setup! Regards, Tom W3TA Sent: Monday, May 12, 2025 10:02 AM To: [email protected]

Emil, there must be enough old S-40’s and such around that a donor part should be available somewhere. So for now, jump the switch and use an external power switch.. like you mentioned. Sent:

EmilI understand.I checked my stash of parts and I don't have a direct replacement.? I may have a pot + switch that has a switch assembly that would fit your tone control.? That would still mean

Don't have any other pictures handy, but not hollow rivets as is often seen. It is the head end of the rivets that hold the contacts.The rotary switch that tone control portion works fine, it is the

Looking at the S-40 schematic, the tone control doesn't have a variable resistance.? It is a four position switch tone control with a SPST AC power switch attached.? The half meg tone pot with power

The middle one

Guys , my memory is failing, but the contacts of most pots/switches that I recall don’t have visible rivets .. do they ?? But maybe some older ones do ? has anybody got a picture? I looked in here:

Sometimes the rivets won't take solder. Scrape both rivets and body. ?Try soldering a again?Sent from my Galaxy

I'll try a little solder on the rivets and lugs. From the plug to the first lug is OK. Nothing on the other side, switch is open at the rivet.

EmilYou didn't mention checking to see if the ON / OFF switch rivets are high impedance thus causing the switch to be permanently open.? You could connect an ohmmeter to the line cord? plug and use

The switch action is erratic. Contact cleaner has had no effect. I could jump the contacts and plug the radio in to a power strip, but if there's an organ donor radio out there with a good switch, I'd

EmilDoes the switch still "click" when turned to the OFF position?? If so, take a close look at the switch solder lugs on the switch wafer.? There should be a rivet on each solder lug that connects

I need a Hallicrafters part number 60A225 power/tone switch. That is the same part number for the power/tone switch in the S-40, S-40A, S-40B, S-85, SX-99 and probably several other Hallicrafters sets

Thanks guys, I thought he shut down and sold all his stock. Don't know where I got that idea. Walt Cates, WD0GOF https://wd0gof.com/Hallicrafters A majority of acceptance is not proof of correctness.