开云体育

Hi Maynard , this was my posting not the OP Emanuele’s but I will convey my understanding. First off: this is one manual version or copy. Perhaps there are others that look correct.. And/or there

Another interesting thing about the diagram: The S-40B diagram has "(FRONT)" and "(REAR)" but not "(FRONT) VIEWED FROM REAR" as for the S-85. The S-40B diagram does show both clockwise and

I agree that the lefthand diagram seems wrong. Note the arrows that show rotation in opposite directions to synchronize the contacts on the wafer as you view each side of the wafer. It seems to me

Thank you, Bill! This site has been very helpful to me. 73, Maynard W6PAP

Thanks Bill, you have done a great job over seeing the site. Skip Magnuson W7WGM

Great site - thank you Bill! [email protected]> wrote:

Took me a while to get here but I am happy to be a member of this group.? Thanks you! Bob WB9RHW

Emanuele and all This is from BAMA for mark 1A and 1B and makes no sense to me, so I rewired it at the right. What say you all?? Do you go with Halligans version? Don end

And thank YOU, Walt Tom Latimer

Bill Congratulations on the 20th anniversary.....all your work has been appreciated, even by those of us who aren't amateur operators You certainly have collected a BUNCH of experts Tom Latimer And

Thank you, Bill! Walt Cates, WD0GOF https://wd0gof.com/Hallicrafters A majority of acceptance is not proof of correctness. https://wd0gof.com/bible-study/commentaries/ ________________________________

Emanuele RE I decided to leave it alone, I give up. Don’t do that, the radio is 99.777% , just some strange thing left. It’s ok to take a break and let the brain cool down. I follow your comments

Put it aside but don't give up on it. How did you decide the IF frequency? When the IF has a crystal filter the crystal determines the exact IF frequency but when there is no crystal you just set the

Guys, I performed a complete RF alignment once again. I used a sig-gen and the SA just as a "receiver" to "see" the LO signal and followed the service manual instructions. LO was fine in all bands

Great and Useful site!! Thanks wa3gin [email protected]> wrote:

Happy Anniversary Paul Bowman KC3FVD

Happy Anniversary! ????? ? Joe Connor

Well believe it or not, its been 20 years, this site has been active and strong for Hallicrafters Radios. Started in 2005 as a lark, I am amazed that we now have 1,078 members. With thanks to all our

Richard what does turning the dial clockwise actually mean? If it was a rotating pointer on a fixed scale it is fairly clear that the POINTER rotates CW. And the numbers stay fixed, but on a rotating

Emanuele, this is late. Your statement here seems to eliminate the idea that the BS setting is the problem. The other day while taking my truck tire off at a tire place, the hex part of the security