开云体育

Hi John. That's the factory supply and original transformer. It came with fins! You can see them in the manual photos. Somewhere along the line, the 866As were replaced by a pair of solid state

Looks great. Did you add the heat sinks to the transformer? It's a nice job. Nice looking amp! John [email protected]> wrote:

I mentioned this in Rick's thread about his new power supply. /g/HallicraftersRadios/topic/ht45_loudenboomer_working_now/106322290 So far I've: Replaced a resistor in and verified PS

I emailed you Dave ________________________________ Sent: Tuesday, June 25, 2024 4:24 PM To: [email protected] <[email protected]> Subject: Re: [HallicraftersRadios] New P2000

HI, I think this is the 2nd time I've emailed you on subject. Still waiting to hear the cost. I can't commit without knowing the total cost including delivery. Thanks for doing this, dave wa3gin

Please email me if you want a panel. They are done and ready to ship.? Clark at Clark Turner Tuning? Or use QRZ C

Richard, Thanks for the information, just what I needed to know. John WD5ENU [email protected]> wrote:

The speaker field can be replaced with a 1500 ohm, 10 Watt wire wound resistor. See the schematic for the S-40 or S-40A for details. I am not sure what the plate load for the transformer should be but

I know I have asked about this before, but lost the return email. I have an 8 Ohm 5 inch 20 watt speaker and an audio transformer, primary is 500, 1500, 2000, and 3000 Ohms. Secondary is 4,8,and 16

WOW!? Thanks- there is some really neat stuff there! 73 George DeitzKN3PAT

Do a search on eBay for Steampunk electronics and you will see several vendors selling meters and other electronics. You may find good deals on stuff they have no clue about. Dwight

Where did you find Steampunk radio stuff at?Thanks- George-KN3PAT

I needed to replace my meter when I got my R-274.? Steampunk people were selling this meter on eBay, and I snapped it up.? They don't know what they were selling, and I got a good price for it. I

I have made several in the past,, it is a simpson model 126, I believe, and you can take the movement from several different simpson models and put into the housing , then swap the neter face, and

You’re welcome glad I could help . Dave

Mine is remarkably stable.? It drifts a few Hz in the first few minutes, but nothing noticeable after that.? I wasn't able to find the original diodes anywhere in the USA - there were a couple on

Paul, thanks so much for the offer! I got a scan from Dave and that should do the trick. Have a great week, Tom N5AMA

Dave, thanks so much for taking the time to scan the dial and forward it to me!! Have a great week. Tom N5AMA

Hi Tom , Here's a scan of the dial . DaveKB6MBC

Tom I can send you a pic of my R-274 meter. Email me direct, I can maybe do more on this. Paul N6FEG [email protected]> wrote: