开云体育

My father, WA3ITL (SK) many years ago gave me his Hallicrafter HT-32B, SX-115, a Hickok tube tester a complete set of spare tubes and other cables and accessories with instructions to give it to the

I sort of remember that there may have been cooling thing on the center pin of the original PL-172 in my HT-33B. However, I have not had it now for about 35 years and at 77 my memory is not that

HT-33B Manual Page 2, 2.1 unpacking, second paragraph. I should have taken a pic, back together now sorry.

I am looking for a spec. sheet for a Shure CM14N, controlled magnetic (dynamic) microphone. It would have been produced in the late 60's early 70's. It was used on Hallicrafters transceivers; the FM7,

Looking at the Eimac 8295A data I saw no mention of it.? Is it shown in the Eimac or PL socket data?? Can you post a picture? -- 73/Rick WA6III __________________________________ No critters were

Anyone know what this is for? WHat does it cool.? It pushes on the center pin that is connected to nothing looking at a 8295 data sheet. The HT33A manual does not mention it. Just curious. Randy

Wow!, That's the prettiest pair I have seen, just beautiful.? Hopefully I can get my 32A/101A back on the air this winter. Russ, N3CO

Try terminating the HA-5 With a 5.6k and measure the voltage across the resistor. It needs to be greater than 20vpp. Walt Cates, WD0GOF https://wd0gof.com/Hallicrafters Your past has no control over

Hello guys, Still looking for some help to get a vintage station operating. This station does just fine with a xtal but I would like to get the HA-5 operational. Output with the xtal seems fine around

Thne HT-33A manual showed the old schoool all in one switch box connections I used.

Thanks, I needed a single box that did it all vs multiple boxes hanging everywhere.

I have for sale two Hallicrafters Ultra High Frequency radios.? One is the S-36a and the other one is the military verison, a RBK-13. Both radios are complete with no mods, or at least I don't see

I did something simpler in the “Key Line” switching. K2WH Sent: Wednesday, October 05, 2022 9:37 AM To: [email protected] Subject: Re: [HallicraftersRadios] Classic Hallicrafters

That's a nice job with the TR switching box, Randy! Things get complicated quickly with old stations :-) John K5MO

Heloo, 1. Cleaned 2. Added 2 OA2s to increase screen to 400 VDC like the HT-33B 3. Added blower speed switch to katch HT-33B 4. Replaced HV reectifiers with solid state 5. Added Eimac 8295 tube 6.

Look here in the database section. /g/HallicraftersRadios/table?id=4829 * K2WH* *Bill's QRZ Biography ( https://www.qrz.com/db/k2wh ) *

I need a cart like that for my HT-33 Mark I? (pair 4CX300A's)? @ 125lbs! I'm still thinking about replacing the plate transformer, choke, and cap with a Drake L-4PS transformer (35lbs)? and Harbach

You mentioned refurbished ht 33a what and how did you do this? If answer is lengthy,? my email is wa0nxe@... tnx 73 dan

Exceptionally clean set.? The '32 looks amazing and of the pair they seem to be the harder beast to find with a clean face. 73/jeff/ac0c alpha-charlie-zero-charlie www.ac0c.com

10 AM is big fun. Gotta get a Ranger running! John K5MO