¿ªÔÆÌåÓý

Date

Re: What action is required by members after the transfer?

 

Carol,

Sorry for lack of quote, haven¡¯t seen how to do that yet in groups.io
There are two ways: select the text you wish to quote before clicking Reply, or click the "Quote Whole Post" button after clicking Reply.
/g/GroupManagersForum/wiki/Message-composition-tips-and-tricks

I am confused on what the members expect to see.
After everything has been copied each will receive a welcome notice from Groups.io. It includes a link to the group's site and an opt-out in case they don't want to be in the new group.

If you set up a "Welcome" notice on the Member Notices tab of your group's Settings page they will receive that also.

Is there a wiki I am missing?
There's GMF's. It isn't comprehensive but we are trying to supplement what's available on the official help page.
/g/GroupManagersForum/wiki
/static/help

Shal


Re: Question about Member Notices - Note to Member

 

¿ªÔÆÌåÓý

Yes, Member Notices. Select Pending Subscriptions from the Notice Type drop down box, then check Active Message box. Below the check box write your message, then click on Update Notice.

?

Don


Question about Member Notices - Note to Member

 

Hi,
How do I use this type of notice under "Member Notices" > "Note to Member" ? I can edit the name, subject and the message. How do I actually configure it to send out? Can I schedule it to send out monthly?

Thank you.
Lily


Re: Is there a way to send an Inquiry type email before accepting new members in Groups.io?

 

That could work.?It is slow, but you can read the responses and see if it is?acceptable. I remember I had to answer about 10-15 questions before joining one group.?It was nuts, but it worked for the mods.
?
Take care

On Jan 24, 2018, at 2:32 PM, Barbara Jones <northbaj@...> wrote:

I am just emailing each new member before they are approved, asking for a single sentence about why they want to join. It is slow, they don't tend to respond in a hurry.
?
Barb Jones
[excess quote trimmed by moderator]


Re: Is there a way to send an Inquiry type email before accepting new members in Groups.io?

 

Wo! What happened, that email looks like a mess. Anyway, to answer the poster's question if there is no way, maybe suggest this to the beta team.

Take care and be blessed.

On Jan 24, 2018, at 2:05 PM, Douglas Swearingen <dougiebehr@...> wrote:

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "
...
[long quote of HTML message body trimmed by moderator]


Re: Is there a way to send an Inquiry type email before accepting new members in Groups.io?

 

¿ªÔÆÌåÓý

There is a setting you can try at Amin/settings/, and at the top of the page there is a setting for Member Notices. Check that out. I set up a Pending Subscriptions, but I¡¯m not sure how it¡¯s working. If I don¡¯t the who the person is that trying to join, then I send them an email also. That was normal operating procedure at Y, so I¡¯m trying to do it at Groups.io

?

Don

?

From: [email protected] [mailto:[email protected]] On Behalf Of Barbara Jones
Sent: Wednesday, January 24, 2018 2:33 PM
To: [email protected]
Subject: Re: [GMF] Is there a way to send an Inquiry type email before accepting new members in Groups.io?

?

I am just emailing each new member before they are approved, asking for a single sentence about why they want to join. It is slow, they don't tend to respond in a hurry.

?

Barb Jones

?


From: ~mary~ <whodatgurl@...>
To: [email protected]
Sent: Wednesday, January 24, 2018 2:00 PM
Subject: [GMF] Is there a way to send an Inquiry type email before accepting new members in Groups.io?

?

I was able to do this in Yahoogroups.? It was nice to vet someone before we accepted them.? I tried searching and couldn't find anything..? Thanks!

?

--

? ~mary~

?

?

?


Re: What action is required by members after the transfer?

Carol Shenkenberger
 

¿ªÔÆÌåÓý

Sorry for lack of quote, haven¡¯t seen how to do that yet in groups.io (I¡¯m sure it¡¯s there though).

?

So Shal,

?

I am mid-way in transit to groups.io from the yahoogroup SUFFOLK_VA_FREECYCLE to SUFFOLK-VA-FREECYCLE at groups.io.??? I haven¡¯t seen any autotransfers yet but it¡¯s only been a day and yahoo may be slow just now.?

?

I am confused on what the members expect to see.? It seems to have changed from some of the earlier messages I have seen. Is there a wiki I am missing?

?

? Carol

?

Sent from for Windows 10

?


Re: Is there a way to send an Inquiry type email before accepting new members in Groups.io?

 

I am just emailing each new member before they are approved, asking for a single sentence about why they want to join. It is slow, they don't tend to respond in a hurry.

Barb Jones



From: ~mary~ <whodatgurl@...>
To: [email protected]
Sent: Wednesday, January 24, 2018 2:00 PM
Subject: [GMF] Is there a way to send an Inquiry type email before accepting new members in Groups.io?

I was able to do this in Yahoogroups.? It was nice to vet someone before we accepted them.? I tried searching and couldn't find anything..? Thanks!

--
? ~mary~
? whodatgurl@...





Re: No login link

Nancy in Renton
 

Yes


Re: Is there a way to send an Inquiry type email before accepting new members in Groups.io?

 

¿ªÔÆÌåÓý

If you are a group owner or perspective owner, you can set up your group as a restricted group and therefore be able to contact the prospective applicant before them being approved to your group.


Doug




From: [email protected] <[email protected]> on behalf of ~mary~ <whodatgurl@...>
Sent: Wednesday, January 24, 2018 1:55 PM
To: [email protected]
Subject: [GMF] Is there a way to send an Inquiry type email before accepting new members in Groups.io?
?
I was able to do this in Yahoogroups.? It was nice to vet someone before we accepted them.? I tried searching and couldn't find anything..? Thanks!

--
? ~mary~
? whodatgurl@...



Re: What action is required by members after the transfer?

 

Thanks Shal.

Yes, I know what the process is (although I haven't needed to use it since the
time limit was introduced) and that workaround is pretty obvious to someone who
is reasonably clued up. I vaguely remember the timescale being discussed some
time ago on beta. Does the green banner you refer to mention the short time
scale? If not perhaps I should raise that on beta? It seems essential for some
people.

Jim

On 23 Jan 2018 at 22:51, Shal Farley wrote:

Jim,

> That time limit is nevertheless ridiculously short, and I fail to
> understand the reason for it.

You can blame J for that.
/g/GroupManagersForum/message/3574
(Just teasing!)

> If I follow a link within one of those messages, as in the case
> described, I would not see the response for about 24 hours (and could
> be several days if I happened to be away from home the following
> days).

It takes more than following the link in the email.

One then must click on the button that says "Email me a link to login".
After you click that button the web site puts up a green banner that
says "An email has been sent to you with a link to log into your
account". If you click that button and then don't bother to check your
email within several minutes I'd say that's on you.

Besides, apart from wasting some of your time the consequence is
harmless. Learn from your mistake and click the button at a time when
you are prepared to check your email.

Shal



--
- My thoughts on freedom (needs updating)
- political snippets, especially economic policy
- misc. snippets, some political, some not
Forget Google! I search with which doesn't spy on you


Is there a way to send an Inquiry type email before accepting new members in Groups.io?

~mary~
 

I was able to do this in Yahoogroups.? It was nice to vet someone before we accepted them.? I tried searching and couldn't find anything..? Thanks!

--
? ~mary~
? whodatgurl@...



Is there any way to RSVP without logging in? #calendar

 

I anticipate that many of the people on my list will probably never need to log in to the groups.io site, and many are also technically challenged.? That said, the RSVP feature could be useful since our group holds events frequently, so I've been trying it out with a couple folks that were direct added to my group.? (In time everyone will be direct added).

When they try to RSVP, it asks for a login/password which they don't have.? The only options I see for them to continue at that point are to:
1) Do 'forgot password' and set up an account
2) Direct them to get a temporary link for sign-in.?

Unfortunately this pretty much ends the process for most of our users.? Is there a better option that I've missed?

Thanks,
Christine


Re: 0 files were transferred

 

¿ªÔÆÌåÓý

Pamela,

?

I don¡¯t ¡®think¡¯ that can be done.

?

From: [email protected] [mailto:[email protected]] On Behalf Of Pamela - N1ZKH
Sent: Wednesday, January 24, 2018 2:06 AM
To: [email protected]
Subject: Re: [GMF] 0 files were transferred

Is it possible to somehow keep the original uploaders name as the person that uploaded the file? Tried it with one and it put my ID as Uploaded By.

Pamela


Re: Great transition

 

¿ªÔÆÌåÓý

We had issues on our enterprise account with bouncing members.? Mark can speak more to what happened there (it was a server issue, not a groups.io issue) so we had to move our server and it¡¯s basically solved the problem.?

?

If anyone has a message they send out to their members about ¡°whitelisting¡± email addresses that might be something you can post regularly to keep those bouncing members at bay.

?

Good luck!

?

Susan Fox

Founder, Park Slope Parents

?

?


Malware Threat in attached photos.

 

Last year I suffered a ransomware attack thru an attached photo in an e-mail.
Are photos (uploaded and attached) scanned for malware in groups.io?
A search in this group had zero results.

KEN

"It has always seemed strange to me," said Doc. "The things we admire in
men, kindness and generosity, openness, honesty, understanding and feeling
are the concomitants of failure in our system. And those traits we detest,
sharpness, greed, acquisitiveness, meanness, egotism and self-interest are
the traits of success." STEINBECK - CANNERY ROW


Data protection

 

I am considering moving the group I manage on YahooGroups to another software base. This potentially would mean releasing names and email addresses to a third party. It thus falls under the remit of the UK Data Protection Act 1984? and then the even more stringent forthcoming EU General Data Protection Regulations (GDPR) from May 2018. In the latter, implied consent (with an opt out for such an action) may not be legal.

How have other list managers dealt with this issue?

Margaret Parker
Leeds, UK


Approving

Nancy in Renton
 

Is there a way to edit and change format (hot pink) while approving?

Nancy


Re: 0 files were transferred

 

Thanks for the replies. I will download them and upload to the group, which brings up another question. Is it possible to somehow keep the original uploaders name as the person that uploaded the file? Tried it with one and it put my ID as Uploaded By.

Pamela


Limits on Photo size but not photo type!

 

All,
I set the size limit in e-mails to a smaller 488x488 maximum,
while images in Photos are limited to a larger 1024 x 1024.

However I don't see a means of limiting photo type.
A Jpeg 488 x 488 image is much smaller than a 488x488 Bitmap.

Is there any way to restrict wasteful image types like Bitmap?
Other than encouraging use of Jpegs?

KEN

"It has always seemed strange to me," said Doc. "The things we admire in
men, kindness and generosity, openness, honesty, understanding and feeling
are the concomitants of failure in our system. And those traits we detest,
sharpness, greed, acquisitiveness, meanness, egotism and self-interest are
the traits of success." STEINBECK - CANNERY ROW