okay... I see my car here, but not in Hollow Tree, my own group. Do I need to have attachments enabled to put the photo in there? Puzzled... Brenda
|
Ok, I see your cat. I was in Plain Text, and I had to go into my profile and change it to HTML. Then after I reloaded, I have all the formatting options now.
So I'm going to try this now, tell me if you see our new car:
|
We transferred roughly 3000 members and over 150000 messages from Yahoo to groups.io in about 2 days. If you generate messages on the group.io site before you have completed the transfer they receive messages numbers based on the next available message number at that moment and may end up interwoven within your Yahoo messages as duplicate numbers.
|
Brenda, if you are replying to a message, you can click on the image icon on the left side of the paper clip icon in the tool bar above the window where you write your reply.? I'd have to test it to see if the same tools are available on a brand new message window.? I've inserted a picture of my cat, Jack.? Do you see him?
Donna
|
Frances wrote:>>Brenda, use the little picture icon to the left of the attachment paperclip icon. Just tested it on my test site because I didn't know either!<<
Okay, I don't have one of those, do you think it's because I'm in plain text? Do I need to be in HTML to do this?
Thanks,
Brenda
|
Brenda, use the little picture icon to the left of the attachment paperclip icon. Just tested it on my test site because I didn't know either! Frances
|
You have to send the transfer address an email giving the green light for the transfer.
Sent from my iPhone
toggle quoted message
Show quoted text
On Sep 2, 2016, at 11:41 AM, Sharon Villines <sharon@...> wrote:
How long does it take to transfer a list. I subscribed the transfer address to my old list and set up a new one here, but have heard nothing more. That was 2? days ago.
Sharon
----
TakomaDC@...
Where Everyone Trims Their Tails,
Smothers Flames, Ignores Trolls, and
Never Sends Private Messages to the List.
|
How long does it take to transfer a list. I subscribed the transfer address to my old list and set up a new one here, but have heard nothing more. That was 2? days ago.
Sharon
----
TakomaDC@...
Where Everyone Trims Their Tails,
Smothers Flames, Ignores Trolls, and
Never Sends Private Messages to the List.
|
Yes, only I usually do everything on the website. Can I do it that way?
And please someone point me to a thread or info in the wiki on how to do it.
Thanks
Brenda
|
She means inline.? Which is easy to do from regular email, and I believe Mark made it possible from the website as well. ? Imbedded like this:
Ro
with Sally and Silk waiting at their feed dishes, and Handy, Feliz &? Police Kitty patrolling in the Great Beyond.
toggle quoted message
Show quoted text
Brenda, you say "directly". Do you mean not as an attachment?
Frances
|
Brenda, you say "directly". Do you mean not as an attachment? Frances
|
Re: Having to only approve members but not approved members messages having some issues
Joseph, And we had decided that we wanted to screen members that are coming into
our group, but not postings. Simple. As J has mentioned both controls are in the group's Settings page, under the Admin drop-down in the left hand column. In the first section (General) leave empty (or uncheck) the box next to Moderated. This establishes a group policy which allows members to post freely, except those members who may have a moderation override set in their subscription. Ask if you have questions about new-member moderation or other aspects of the individual member subscription controls. Also in the first section, just below Moderated, put a checkmark on Restricted. That will cause memberships to be held in the Pending list until you approved them. I tried explaining to Mark what I wanted, but he has not gotten back to me. He's trying to stay focused on bug fixes and feature development, so he prefers to let us users help each other out where practical. Shal
|
Re: Having to only approve members but not approved members messages having some issues
I did reply to that too. Check the box that says 'Restricted'. J
Sent from my iPhone
toggle quoted message
Show quoted text
On Sep 1, 2016, at 9:03 PM, Joseph Hudson < jhud7789@...> wrote: Okay Jay, now I have that fixed. What I want to do now, is make it to where they apply for membership instead of the join I went and checked don't one box that I'm able to see as an owner as far as moderating goes. I seen nothing about approving applications. Maybe I'll just wait and see if Mark replies.
Joseph Hudson group owner for iPad help for the blind Email I device support Telephone 2543007667 Skype joseph.hudson89 facebook Twitter ?
FaceTime/iMessage
Joseph, If you want to moderate (approve) all messages, then check the box that says "Moderated." Leave it unchecked if you don't want to approve messages. J
|
Re: Having to only approve members but not approved members messages having some issues
Joseph, go into Settings and check the box that says Restricted. J
Sent from my iPhone
toggle quoted message
Show quoted text
On Sep 1, 2016, at 8:00 PM, Joseph Hudson < jhud7789@...> wrote: Jay, that's not what I'm morning. Right now the way my group is acting as my members are to joined instead of applying for membership. So therefore, I don't end up approving them. They just end up sending me a notification that they have joined. I'm not wanting to fill out the questionnaire. I'm wanting to know, where I need to go in order to change my group settings in order to reflect this change.
Joseph Hudson group owner for iPad help for the blind Email I device support Telephone 2543007667 Skype joseph.hudson89 facebook Twitter ?
FaceTime/iMessage
Joseph, What our group does is send out a "pending member notice" containing a short questionnaire that must be returned via email. You can find the pending member form in Settings --> Member Notices --> Pending Subscription and fill it out to your liking. It will automatically go out from the +owner address to the pending member. The pending member's response will go to the +owner address, and then you can decide whether or not to approve the member. J
|
Okay,
I want to put a photo directly in my post.
Can someone direct me to the steps to do that? Then I can try it in Shal's test.
Thanks,
Brenda
|
Re: Having to only approve members but not approved members messages having some issues
Okay Jay, now I have that fixed. What I want to do now, is make it to where they apply for membership instead of the join I went and checked don't one box that I'm able to see as an owner as far as moderating goes. I seen nothing about approving applications. Maybe I'll just wait and see if Mark replies.
Joseph Hudson group owner for iPad help for the blind Email I device support Telephone 2543007667 Skype joseph.hudson89 facebook Twitter ?
FaceTime/iMessage
toggle quoted message
Show quoted text
Joseph, If you want to moderate (approve) all messages, then check the box that says "Moderated." Leave it unchecked if you don't want to approve messages. J
|
Re: Having to only approve members but not approved members messages having some issues
Joseph, If you want to moderate (approve) all messages, then check the box that says "Moderated." Leave it unchecked if you don't want to approve messages. J
|
Re: Having to only approve members but not approved members messages having some issues
Okay I got that fixed. Now it's just a matter of figuring out how to get the postings on moderate it once they have become members. Hopefully this will fix my problems. Because what he did is emitted to complete moderate a group and that's not what I wanted.
Joseph Hudson group owner for iPad help for the blind Email I device support Telephone 2543007667 Skype joseph.hudson89 facebook Twitter ?
FaceTime/iMessage
toggle quoted message
Show quoted text
p.s. Also in your Settings, you have to check the box that says "Restricted." That makes people "apply for membership" rather than just "join," and allows the pending member notice to be sent. Then you can approve the pending subscription or not. J
|
Re: Having to only approve members but not approved members messages having some issues
Jay, that's not what I'm morning. Right now the way my group is acting as my members are to joined instead of applying for membership. So therefore, I don't end up approving them. They just end up sending me a notification that they have joined. I'm not wanting to fill out the questionnaire. I'm wanting to know, where I need to go in order to change my group settings in order to reflect this change.
Joseph Hudson group owner for iPad help for the blind Email I device support Telephone 2543007667 Skype joseph.hudson89 facebook Twitter ?
FaceTime/iMessage
toggle quoted message
Show quoted text
Joseph, What our group does is send out a "pending member notice" containing a short questionnaire that must be returned via email. You can find the pending member form in Settings --> Member Notices --> Pending Subscription and fill it out to your liking. It will automatically go out from the +owner address to the pending member. The pending member's response will go to the +owner address, and then you can decide whether or not to approve the member. J
|
Re: Having to only approve members but not approved members messages having some issues
p.s. Also in your Settings, you have to check the box that says "Restricted." That makes people "apply for membership" rather than just "join," and allows the pending member notice to be sent. Then you can approve the pending subscription or not. J
|
Nightowl >8#
Donna
Frances
Ro
Shal Farley