开云体育

AA6YQ comments below

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Kurt
Arseneault
Sent: Wednesday, September 02, 2009 9:39 AM
To: dxlab@...
Subject: [dxlab] DXK rejects Ukraine entries


FIrst of all, I want to express my thanks to you for such a powerful suite
of programs. I have been using DX Lab Suites for several months and love
it.
Your level of support for the software through the group is something I
have
rarely seen and you are to be commended for it.

However, I am experiencing one rather strange situation. I am unable to
enter Ukraine calls into my log. The DXCC field flashes red. The Code box
reads 288. After I exit, (delete the QSO),I get a box which reads there
"The
DXCC Progress table contains no entry for DXCC prefix UT". I examined the
DXCC database in Access and UT appears there. I have all the latest updates
installed. Gremlins have crept in somewhere I suspect.

First, verify that you have the current version of the DXCC database

installed; on the General tab of DXKeeper's Config window, click the
"Database Info" button at the bottom. If the DXCC database version is not
2.2.7, then terminate DXKeeper (and SpotCollector, if its running), open
the
Databases tab of DXView's Config window, and click the button to upgrade
your DXCC database.

Then restart DXKeeper (if you had to terminate it to upgrade the DXCC

database), and click the Recompute button at the bottom of the Main
window's
"Check Progress" tab.

If this doesn't clear up the "no entry for DXCC prefix UT" problem,

please let me know.

73,

Dave, AA6YQ



------------------------------------

Yahoo! Groups Links

AA6YQ comments below

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Kurt
Arseneault
Sent: Wednesday, September 02, 2009 9:39 AM
To: dxlab@...
Subject: [dxlab] DXK rejects Ukraine entries


FIrst of all, I want to express my thanks to you for such a powerful suite
of programs. I have been using DX Lab Suites for several months and love
it.
Your level of support for the software through the group is something I
have
rarely seen and you are to be commended for it.

However, I am experiencing one rather strange situation. I am unable to
enter Ukraine calls into my log. The DXCC field flashes red. The Code box
reads 288. After I exit, (delete the QSO),I get a box which reads there
"The
DXCC Progress table contains no entry for DXCC prefix UT". I examined the
DXCC database in Access and UT appears there. I have all the latest

installed. Gremlins have crept in somewhere I suspect.

First, verify that you have the current version of the DXCC database

installed; on the General tab of DXKeeper's Config window, click the
"Database Info" button at the bottom. If the DXCC database version is not
2.2.7, then terminate DXKeeper (and SpotCollector, if its running), open
the
Databases tab of DXView's Config window, and click the button to upgrade
your DXCC database.

Then restart DXKeeper (if you had to terminate it to upgrade the DXCC

database), and click the Recompute button at the bottom of the Main
window's
"Check Progress" tab.

If this doesn't clear up the "no entry for DXCC prefix UT" problem,

please let me know.

73,

Dave, AA6YQ



------------------------------------

Yahoo! Groups Links

OK, then clicking the "Recompute" button at the bottom of the "Check
Progress" tab of DXKeeper's Main window should be sufficient.

73,

Dave, AA6YQ

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Kurt
Arseneault
Sent: Wednesday, September 02, 2009 1:47 PM
To: dxlab@...
Subject: Re: [dxlab] DXK rejects Ukraine entries


Thanks for your prompt reply Dave, my DXCC database is 2.2.7.
Regards,
Kurt VE1TT



2009/9/2 Dave AA6YQ <aa6yq@...>

AA6YQ comments below

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Kurt
Arseneault
Sent: Wednesday, September 02, 2009 9:39 AM
To: dxlab@...
Subject: [dxlab] DXK rejects Ukraine entries


FIrst of all, I want to express my thanks to you for such a powerful

suite

of programs. I have been using DX Lab Suites for several months and love
it.
Your level of support for the software through the group is something I
have
rarely seen and you are to be commended for it.

However, I am experiencing one rather strange situation. I am unable to
enter Ukraine calls into my log. The DXCC field flashes red. The Code box
reads 288. After I exit, (delete the QSO),I get a box which reads there
"The
DXCC Progress table contains no entry for DXCC prefix UT". I examined the
DXCC database in Access and UT appears there. I have all the latest

updates

installed. Gremlins have crept in somewhere I suspect.

First, verify that you have the current version of the DXCC database

installed; on the General tab of DXKeeper's Config window, click the
"Database Info" button at the bottom. If the DXCC database version is not
2.2.7, then terminate DXKeeper (and SpotCollector, if its running), open
the
Databases tab of DXView's Config window, and click the button to upgrade
your DXCC database.

Then restart DXKeeper (if you had to terminate it to upgrade the DXCC

database), and click the Recompute button at the bottom of the Main
window's
"Check Progress" tab.

If this doesn't clear up the "no entry for DXCC prefix UT" problem,

please let me know.

73,

Dave, AA6YQ



------------------------------------

Yahoo! Groups Links

--
***Here is an Important Message for anyone who receives this email:***
If you forward this correspondence, please delete the forwarding history,
which includes my email address! It is a courtesy to me and others who may
not wish to have their email addresses sent all over the world! Erasing the
history helps prevent Spammers from mining addresses and viruses from being
propagated!



Kurt Arseneault

273 Meadow Lane,
Kentville, NS B4N 3V8
Canada

807 E 21 ST, Unit 11,
Mission, TX 78572

(956) 584-1769 (condo)
902-679-9783 (home Nova Scotia)
902-680-6230 (cell Nova Scotia)






------------------------------------

Yahoo! Groups Links



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.74/2339 - Release Date: 09/02/09
05:50:00



------------------------------------

Yahoo! Groups Links