开云体育

What do you mean "single space"? If you mean the row height in Spot Database display is too large, got to Config -> Spot Database Display and click the "Set Row Height" button in the Font panel along

Can't seem to get it to single space.? Don't know what I did, but no success.

+ AA6YQ comments below Listing or Printing Needed Grids. Is there a way to generate needed grids? + There isn't. 73, Dave, AA6YQ

Listing or Printing Needed Grids. Is there a way to generate needed grids?? The progress report show worked grids.? It would be nice to have a sheet of needed grids printed out. Mike W0MU

+ AA6YQ comments below + DXLab provides real-time award tracking for the DXCC, IOTA, Marathon, VUCC, WAS, WAZ, and WPX awards on the bands and modes that you've specified for each of them. Active

SpotCollector will track your 6-meter grids. First set up in DXKeeper | Config | Awards tab | VUCC Bands & Modes, this will activate the search for VHF grids. Then configure your SpotCollector display

If multiple versions of JTAlert are exhibiting problems the cause will very likely be caused by something other than JTAlert. The most likely culprit is your protection software is interfering with

To be clear I had everything set up per the wiki and other pages and had been working perfectly for the last few years. Every parameter from

+ AA6YQ comments below + Step-by-step instructions are here: https://www.dxlabsuite.com/dxlabwiki/GettingStartedwithK1JTModesDirect + If you prefer JTAlert, install the latest version as Laurie VK3AMA

Peter, here is an additional guidance that I need to digest: https://www.dxlabsuite.com/dxlabwiki/GettingStartedwithK1JTModesDirect It seems to offer insight into various uses of "WSJTX to DXLab" when

You do not need JT Alert to log into DXKeeper. Check the documentation . You can have each QSO log directly to DXKeeper without JTALERT. There are 2 ways to operate with DXLABS. Outlook LT Gil W0MN

Here is the link: http://www.dxlabsuite.com/dxlabwiki/GettingStartedwithK1JTModesDirect Bruce McLain bruce.mclain@...

Hi Peter. I"m one of the novices here, grin. I have WSJTX reporting directly to the DXLab suite from the directions here: https://www.dxlabsuite.com/dxlabwiki/GettingStartedwithK1JTModes I'm not using

DXLab will directly interact with WSJT-X. Unfortunately, I can’t get to the DXLab Wiki page to reference how to do that. Bruce McLain - K%WBM bruce.mclain@...

Such old JTAlert versions are not compatible with modern Wsjtx versions. As such they are no longer available for download. If your unhappy with JTAlert, don't use it. DXLab will work with Wsjtx for

Last November I had a catastrophic system crash that required me to do a full rebuild with new hardware. I cloned the old drive and got the OS running, no data was lost, and DX Lab Suite reinstalled

I’ll offer some of my findings with mysterious USB actions. --USB cables have length limitations. I believe that there is a normal expectation of one meter length. To exceed that length, I bought a

Hi Gil - I checked and I've been running the latest firmware, and did update the driver today. Still no joy, but at least it's usable. The problem is recent, so I'm really suspicious that it's related

The Kenwood manual emphasizes that you must use the Kenwood driver and be sure you have the latest Kenwood firmware. Download from Kenwood and get the Kenwood Radio Programming Software working as a

Well, the behavior of ARCP is similar to Commander, but with one difference. If I reboot with the rig USB plugged in, neither program can open the COM port. The difference is that a simple