开云体育

Just built a new Win11 box and installed a fresh copy of DXLab. ?Successfully imported my QSO database from DXLab on the old Win10 box. ?Fresh app talks to the rig and logs QSOs FB. I have populated

Try the following: Row 1 offset = 3 mm Row height = 37 mm Column 1 offset = 4 mm Column 2 offset = 72 mm Column 3 offset = 144 mm Label width = 64 mm You may need to tweak the column 2 and column 3

+ AA6YQ comments below + DXKeeper is not reducing the printable area to 288.961 X 203.2 mm - that printable area is what your printer driver is reporting. Three columns o

Hi, I am trying to print QSL labels on TOWER W100 labels on A4 sheets that are nominally 297 X 210 mm.? The labels are 37 X 70 mm in 3 columns and 8 rows.? The column offsets should be 0, 70, 140 as

Thanks Dave - new radio=lots of questions Norman [email protected]> wrote:

+ AA6YQ comments below + The appropriate article in "Getting Started with DXLab" is here: https://www.dxlabsuite.com/dxlabwiki/FlexSignature 73, Dave, AA6YQ

Hi Group, I finally bit the bullet and my new Flex 8400 should be here tomorrow. Is the documentation in TransceiverControlFlexradio - DX Lab Suite Wiki (

+ AA6YQ comments below + Thanks, Jeff! Did WinWarbler display RTTY text decoded by your K4 (as distinguished from RTTY text decoded by the MMTTY and 2Tone engines)? Dave

Dave, I am an infrequent user of WinWarbler, but I do have it set up.? I fired it up this morning, and it appears to function as it should with My K4, both TX and RX.? Not a lot of activity here at

...by setting the Model selector to "Xcvr Ctrl App" on the "External Modem" tab of WinWarbler's Configuration window? When so configured, WinWarbler transmits RTTY by directing Commander to send the

Thank you! I suspected it was spot filtering because I see 1000s of entries in the spot database. Turned out that somehow I cleared out the band checklist in the band filter dialog. Fixed that and

Try working through the items here: <http://www.dxlabsuite.com/dxlabwiki/EmptyDatabase> Most common - improperly configured filter: Control-Click on the X beside the filter text box to remove all

Sorry to add another non-specific "Spots don't display" question. But spots stopped displaying. Windows 11, Nvidia RTX3060i with Studio Driver 576.02, Spot Collector 9.8.3 Only spot source is N6WS and

What do you mean "single space"? If you mean the row height in Spot Database display is too large, got to Config -> Spot Database Display and click the "Set Row Height" button in the Font panel along

Can't seem to get it to single space.? Don't know what I did, but no success.

+ AA6YQ comments below Listing or Printing Needed Grids. Is there a way to generate needed grids? + There isn't. 73, Dave, AA6YQ

Listing or Printing Needed Grids. Is there a way to generate needed grids?? The progress report show worked grids.? It would be nice to have a sheet of needed grids printed out. Mike W0MU

+ AA6YQ comments below + DXLab provides real-time award tracking for the DXCC, IOTA, Marathon, VUCC, WAS, WAZ, and WPX awards on the bands and modes that you've specified for each of them. Active

SpotCollector will track your 6-meter grids. First set up in DXKeeper | Config | Awards tab | VUCC Bands & Modes, this will activate the search for VHF grids. Then configure your SpotCollector display

If multiple versions of JTAlert are exhibiting problems the cause will very likely be caused by something other than JTAlert. The most likely culprit is your protection software is interfering with