开云体育

I pretty much do an 80/20 split with POTA and DX (POTA is 80%). If I am running FTx? I use the organic log in WSJT-X for logging and then email the .adi file to myself and then upload it into

Try Device Manager -> Ports (COM & LPT) ... open the serial port for your TS-590 -> Advanced Settings and check the Miscellaneous Settings. I would start with "Serial Enumerator" checked and all the

HI Matthias - What happens if you plug in one device, say the rig, and then go into Device Manager and change the COM port number in the Advanced Settings for that port? It should retain that change

Am 07.05.2025 um 05:52 schrieb Tim Sweeney via groups.io: I had and have similar problems with Win11 24H2. When I start Arduino Developm

Hi Joe, you're on to something, I think. But to answer the questions, fastboot and hibernation are disabled (always), sleep is enabled but only manually triggered,? and I had tried both cold boot and

Sounds like a USB initialization error. Are you doing a power down reboot or simply a "Restart"? Is the TS-590S powered on before starting/rebooting Windows or is the TS-590S off when Windows is

Dave, thanks very much for this information! DXLab continues to amaze me, and your willingness to help is always impressive and appreciated. Looks like I have more reading to do in preparation of my

Sorry for the missing details. That's what I get for posting just before going to bed! The rig generating the port is a TS-590S. The device it generates is listed as "Silicon Labs CP210x USB to UART

Thanks, Dave. I followed the process you recommended precisely, and still no joy. Here is the state of the current error report. Any ideas for me about what I should do next? As far as I can tell, the

+ AA6YQ comments below I've recently started encountering the infamous "Invalid Port Number (8002), thePort = primary CAT port, port number = 4, settings = 115200,N,8,1" message box when trying to

I've recently started encountering the infamous "Invalid Port Number (8002), thePort = primary CAT port, port number = 4, settings = 115200,N,8,1" message box when trying to start Commander. Device

+ AA6YQ comments below + 3077 "My QTHs"? No problem. DXKeeper supports 1000 more to spare. 73, Dave, AA6YQ

Yes, Several county hunters have operated from all counties, current count of counties and equivalent areas - 3077 No need to worry about dxlab supporting that number though. 73 Bob, KA9JAC -- This

A first cut at "Logging QSOs as a POTA Activator" is available here: https://www.dxlabsuite.com/dxlabwiki/LoggingAsPotaActivator Corrections and suggested additions are welcome. 73, Dave, AA6YQ

Has anyone operated from more than 1000 different geographic locations? Looks like I have a goal now ;-) 73, Ken, KJ9B ________________________________ Sent: Tuesday, May 6, 2025 17:50 To:

+ AA6YQ comments below + DXKeeper assumes that all QSOs in your log were made from the same DXCC entity, and are thus valid for all DXCC awards. You can designate? operating locations that do not

+ AA6YQ comments below + At present, the maximum number of myQTHs supported by DXKeeper is 4096. Has anyone operated from more than 1000 different geographic locations? + If, say, you're using

I have not done a POTA activation yet, but enjoying hunting. Although, I plan to begin activations soon. I have been playing with HAMRS PRO on a notebook for the field that I could then export an ADIF

I basically do this (Dave's recommendation) and it works great. I use HAMRS in the field for pota and then import the adif files to DXKeeper. To keep things simple and because I thought there was a

Google will find county maps for a state, then search for the county that you think includes the QTH and click on the displayed map. Those of us old enough to have depended on paper road maps may