开云体育

Obviously, that software is (has become) unreliable and should be removed from any/all systems. 73, ... Joe, W4TV

I wrote the following filter in Spot Collector: (SPSNR>ReqSNR or LPSNR>ReqSNR) and <Needfilter> and <LotWfilter> and <Modefilter> and <Bandfilter> and<Agefilter> I "expected" to get spots with SP or

Software that Dave recently recommended ( I cannot type it, because if I do, my email sender rejects it) is blocking dxpots.com due to a Trojan. I hav tried excluding it, I have added dxspots.com as

Just before this was posted yesterday, I managed to work 5H1KB, Tanzania on 10 meters FT8. As per my usual routine for suspected weak signals I looked at PropView’s prediction graph. Not only was 10

+ AA6YQ comments below Dxkeeper and Spotcollector - no text displayed DXKeeper errorlog 2025-04-24 09:44:11.987 > I = 126 2025-04-24 09:44:11.987 > DXLogMain.LogGrid.Columns.Count = 126 2025-04-24

Dave's Commander manual says (and m aybe this can help you ): To help keep track of each memory's purpose,? you can record notes that pop up whenever the mouse cursor hovers over the memory's *Sel*

Dx commander memories are handy for me since my biological memory is awful. ?Could a small title bar be added over each memory list in dx commander? We have 10 frequency lists, but it is not obvious

Does the 100k match the number in the header (lower right) of the LotW "My QSOs" page? It is likely, unless you have specified a single callsign in QSL Config -> LotW -> "Limit Sync operations to this

Is the 100k that LOTW? states include other calls I have used such as DXpeditions?? I am unsure where I would have made 30k qsos that got uploaded to LOTW without using DXK. I believe I can create a

It was the grid square. Thanks.

No Norton Utilities, so I followed the instructions in the Microsoft support link and it worked! I created my new database. Dave, as always, your support was quick and your guidance was to the point!

Dxkeeper and Spotcollector - no text displayed DXKeeper errorlog 2025-04-24 09:44:11.987 > ? ?I = 126 2025-04-24 09:44:11.987 > ? DXLogMain.LogGrid.Columns.Count = 126 2025-04-24 09:44:47.012 >

Yes, I'm aware of the DXK support (and some other "gateways" like JTAlert). However, I've programmed my own "Monitor/Reporter" on top of WSJT-X? giving more "personal" touch on the decodes from

+ AA6YQ comments below I've done some of my own "scripts" scanning WSJT-X adi files (creating import *.adif-files) and I have a wish that that I could import those in DXKeeper from directly via a

Hi DXLab, I've done some of my own "scripts" scanning WSJT-X adi files (creating import *.adif-files) and I have? a wish that? that I could import those in DXKeeper from directly via a command line

+ AA6YQ comments below I am importing logs from wsjtx, jtdx, mshv etc. Most of the time I use jtalert to log to DXK at the same time but occasionally their are hiccups. When I do an import I usually

I am importing logs from wsjtx, jtdx, mshv etc.? Most of the time I use jtalert to log to DXK? at the same time but occasionally their are hiccups.? When I do an import I usually get an unaccepted

Thanks, but I just wanted to say how well the gateway program works and how it can save users time and effort. Jim N7US Sent from my Verizon, Samsung Galaxy smartphone

+ AA6YQ comments below + The limit is 10 memories per bank. Ten banks of 10 memories each are provided; you can switch from one bank to another with one mouse click. 73, Dave, AA6YQ

+ AA6YQ comments below + Older propagation prediction engines may support a wider frequency range, but they are inferior to VOACAP on HF bands. SpotCollector directs PropView to use VOACAP; I'm not