DXLab@groups.io | Messages

Re: broke freq

On the Main window's "Log QSOs" tab, click in the QSO panel's "tx freq" box,
strike CTRL-A to select all digits in the frequency, and strike the Delete
key. Then click the Save button.

   73,

        Dave, AA6YQ

Show quoted text

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
k9ct
Sent: Monday, September 14, 2009 9:33 PM
To: dxlab@...
Subject: [dxlab] broke freq

I looked through the past posts but can't find. How do I change the tx freq
to null and the tx band stays put? The band is right but the freq does not
match the band. I can select the broken ones. I tested on a single record
but the band changed and then it started to recompute for the dx prefix!

Thanks, Craig K9CT

------------------------------------

Yahoo! Groups Links

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.94/2367 - Release Date: 09/14/09
11:36:00

Re: Updates Problem

Michael Morgan

#72181

Try selecting a different mirror in the top of the DXLablauncher config
window.

Michael, AA5SH

From: dxlab@... [mailto:dxlab@...] On Behalf Of
npalex@...
Sent: Monday, September 14, 2009 9:13 PM
To: dxlab@...
Subject: [dxlab] Updates Problem

I have just downloaded DXLAB Suite to a new Laptop. All went well, and all
modules work. However DX Launcher shows updates available. Exercising that
choice brings up menu showing DXKeeper and Pathfinder updates (red) clicking
Upgrade button results in an error message with final statement that the
"upgrade file could not be downloaded and abort"

The operating system is windows XP pro.

Need a suggestion on how to resolve.

Norm W4QN

Re: Solar Flux data

#72179

Please do the following, George

1. on the Config window's General tab, check the "Log debugging info" box

2. open one of your spot source windows, and issue the command

SH/WWV

(verify that the cluster responds by displaying the last few WWV spots)

3. on the Config window's General tab, uncheck the "Log debugging info" box

4. attach the errorlog.txt file from you SpotCollector folder to an email
message, and send it to me at aa6yq@...

Thanks...

   73,

       Dave, AA6YQ

Show quoted text

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
George Steube
Sent: Monday, September 14, 2009 8:59 PM
To: dxlab@...
Subject: RE: [dxlab]Solar Flux data


Hi Dave,
I noticed for about the last month that the solar flux data has not been
updating.  The last update I have is 8/31.  I have gone to the spot sources
and downloaded solar data, but the solar flux data in SC doesn't  add it.  I
checked the help files and there doesn't seem to be a way of turning it off
so what else could be set wrong?  Thanks.
George
W2GS
  -----Original Message-----
  From: dxlab@... [mailto:dxlab@...]On Behalf Of
Dave AA6YQ
  Sent: Sunday, September 13, 2009 12:45 PM
  To: dxlab@...
  Subject: RE: [dxlab] VISTA


    When you say that the Solar Flux window is not operating, do you mean
that
  this window does not appear, or that the window appears but contains no
  data?

  What happens if you type a

  SH/WWV/100

  command to one of your spot sources?

  73,

  Dave, AA6YQ

  -----Original Message-----
  From: dxlab@... [mailto:dxlab@...]On Behalf Of
  leuven0
  Sent: Sunday, September 13, 2009 7:33 AM
  To: dxlab@...
  Subject: [dxlab] VISTA

  Long time DxLab user. Just downloaded DxLab to a new computer with Vista
OS
  and everything seems to be operating except the Solar Flux window in
  Spotcollector and consequently Propview. Any suggestions?

  Fred WA3JJM

  ------------------------------------

  Yahoo! Groups Links

  No virus found in this incoming message.
  Checked by AVG - www.avg.com
  Version: 8.5.339 / Virus Database: 270.13.83/2353 - Release Date: 09/12/09
  06:37:00










------------------------------------

Yahoo! Groups Links



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.94/2367 - Release Date: 09/14/09
11:36:00

Re: Updates Problem

#72180

On the Launcher's Config window, try selecting a different distribution
site.

   73,

      Dave, AA6YQ

Show quoted text

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
npalex@...
Sent: Monday, September 14, 2009 10:13 PM
To: dxlab@...
Subject: [dxlab] Updates Problem

I have just downloaded DXLAB Suite to a new Laptop.  All went well, and all
modules work.  However DX Launcher shows updates available.  Exercising that
choice brings up menu showing DXKeeper and Pathfinder updates (red) clicking
Upgrade button results in an error message with final statement that the
"upgrade file could not be downloaded and abort"

The operating system is windows XP pro.

Need a suggestion on how to resolve.

Norm W4QN

------------------------------------

Yahoo! Groups Links

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.94/2367 - Release Date: 09/14/09
11:36:00

Updates Problem

[email protected]

#72178

I have just downloaded DXLAB Suite to a new Laptop.  All went well, and all modules work.  However DX Launcher shows updates available.  Exercising that choice brings up menu showing DXKeeper and Pathfinder updates (red) clicking Upgrade button results in an error message with final statement that the "upgrade file could not be downloaded and abort"

The operating system is windows XP pro.

Need a suggestion on how to resolve.

Norm W4QN

broke freq

k9ct

#72177

I looked through the past posts but can't find. How do I change the tx freq to null and the tx band stays put? The band is right but the freq does not match the band. I can select the broken ones. I tested on a single record but the band changed and then it started to recompute for the dx prefix!

Thanks, Craig K9CT

Re: Solar Flux data

#72176

Hi Dave,
I noticed for about the last month that the solar flux data has not been
updating.  The last update I have is 8/31.  I have gone to the spot sources
and downloaded solar data, but the solar flux data in SC doesn't  add it.  I
checked the help files and there doesn't seem to be a way of turning it off
so what else could be set wrong?  Thanks.
George
W2GS

Show quoted text

-----Original Message-----
  From: dxlab@... [mailto:dxlab@...]On Behalf Of
Dave AA6YQ
  Sent: Sunday, September 13, 2009 12:45 PM
  To: dxlab@...
  Subject: RE: [dxlab] VISTA


    When you say that the Solar Flux window is not operating, do you mean
that
  this window does not appear, or that the window appears but contains no
  data?

  What happens if you type a

  SH/WWV/100

  command to one of your spot sources?

  73,

  Dave, AA6YQ

  -----Original Message-----
  From: dxlab@... [mailto:dxlab@...]On Behalf Of
  leuven0
  Sent: Sunday, September 13, 2009 7:33 AM
  To: dxlab@...
  Subject: [dxlab] VISTA

  Long time DxLab user. Just downloaded DxLab to a new computer with Vista
OS
  and everything seems to be operating except the Solar Flux window in
  Spotcollector and consequently Propview. Any suggestions?

  Fred WA3JJM

  ------------------------------------

  Yahoo! Groups Links

  No virus found in this incoming message.
  Checked by AVG - www.avg.com
  Version: 8.5.339 / Virus Database: 270.13.83/2353 - Release Date: 09/12/09
  06:37:00

Re: eXcel to DXKeeper

#72175

AA6YQ comments below-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Steve
Sent: Monday, September 14, 2009 7:15 PM
To: dxlab@...
Subject: Re: [dxlab] Re: eXcel to DXKeeper

Dave,

Thought I'd try importing as you describe below but from a tab-delimited
text file (I didn't see any reference to a comma-delimited import on the
linked web page).

The import seems to work . . . excepting this curiousity . . . I have a
column titled MODE and all the rows under it are filled with CW. It
ignores the column. If I change the title to mode (lower case), it
works. Wonder why?

I suspect that's a defect. Could you attach the tab-delimited file youimported to an email message and send it to me at aa6yq@... so I
can see what's happening? Thanks...

On a separate but related issue, Excel puts double quotes around the
comment fields when I view the exported text file in Notepad. The double
quotes then show up in DXKeeper's comment field. The comment fields are
Excel formulas which concatenate several other fields. Does the
concatenation operator trigger the double quotes?

I just checked the & operator, and it doesn't seem to do that. How areyou doing the concatenation?

   73,

       Dave, AA6YQ

Re: Application Updates

#72174

I have added "provide an option to check for updates daily" to the
Launcher's Enhancement list. I'll have to implement this in a way that
doesn't result in large numbers of Launchers simultaneously attempting to
download the "what's available" file.

   73,

       Dave, AA6YQ

Show quoted text

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Michael Morgan
Sent: Monday, September 14, 2009 10:14 AM
To: dxlab@...
Subject: [dxlab] Application Updates

Dave,
  Not sure if this is on your enhancement list.  But I find most of the time
I leave the launcher app running all the time on the side of the screen.  It
appears that your check for new apps/db is just run when the launcher is
first loaded.  Have you considered having it perform an update check at a
user specified interval?  I find now when I get an email notification I
close and reopen launcher to be able to check for new apps or click the new?
button.  Not a biggie, just a suggestion.

Thanks again for the great application suite and the rapid support response.

73's

Michael, AA5SH

-----Original Message-----
From: dxlab@... [mailto:dxlab@...] On Behalf Of Dave
AA6YQ
Sent: Sunday, September 13, 2009 10:01 PM
To: dxlab@...
Subject: RE: [dxlab] LoTW user list 13/09/2009

Updated eQSL AG and LotW participant databases are available via the
Databases tab of DXView's Config window.

Gracie, Renzo.

    73,

        Dave, AA6YQ

------------------------------------

Yahoo! Groups Links

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.94/2367 - Release Date: 09/14/09
11:36:00

Re: eXcel to DXKeeper

#72173

Dave,

Thought I'd try importing as you describe below but from a tab-delimited text file (I didn't see any reference to a comma-delimited import on the linked web page).

The import seems to work . . . excepting this curiousity . . . I have a column titled MODE and all the rows under it are filled with CW. It ignores the column. If I change the title to mode (lower case), it works. Wonder why?

On a separate but related issue, Excel puts double quotes around the comment fields when I view the exported text file in Notepad. The double quotes then show up in DXKeeper's comment field. The comment fields are Excel formulas which concatenate several other fields. Does the concatenation operator trigger the double quotes?

Thanks.

Steve K8JQ

aa6yq wrote:

Show quoted text

AA6YQ comments below
        --- In dxlab@..., Ian Scott <thole42@...> wrote:

Greetings! New member here. k1oIq.

Welcome!
        I'm thinking of getting involved with this programme to use in conjunction with eQSL. But first, I have an existing log...

Can DXKeeper import an existing QSL database from eXcel?

DXKeeper cannot directly import an Excel spreadsheet, but it can import a comma-delimited file that conforms to a specific set of rules, as described in
        <>

In general, you can produce generate this comma-delimited file from your Excel spreadsheet by adding a new worksheet and populating it with formulae that put the data in the required format. If you need help with this, please let me know.
            73,

         Dave, AA6YQ

------------------------------------

Yahoo! Groups Links

-- 
Read The Patriot Post
hppt://PatriotPost.US/Subscribe/ Vetitas vos Liberabit

Re: DXKeeper // County Problem

Richard J. Fiero II W5TFW

#72172

actually,

 this is the 1st time I have ever encountered this situation.
 Thanks to ALL,  I have learned something NEW !

Show quoted text

----- Original Message ----- 
  From: Rich - W3ZJ 
  To: dxlab@... 
  Sent: Monday, September 14, 2009 2:44 PM
  Subject: Re: [dxlab] Re: DXKeeper // County Problem

    The following is a copy of the rule posted on the CQ magazine site:

  "C. County identity
  4. In the case of cities, parks, or reservations not within counties 
  proper, applicants may claim any one of the adjoining counties for 
  credit (once)."

  In other words if you live in an independent city the award applicant 
  can decide which nearby county he want is to count for.

  Virgina has the most of these but I believe that Carson City, NV and 
  Baltimore MD are also independent cities. There is a Baltimore county in 
  MD but the city of Baltimore is not within it - and you thought you were 
  confused :-)

  73, Rich - W3ZJ

  aa6yq wrote:
  > The authoritative source for US counties cited in ADIF (and thus used by DXKeeper) is
  >
  > <>
  >
  > As you can see, "Norfolk City" is not listed. You could ask the folks at countyhunter.com how QSOs with Norfolk City should be recorded, or perhaps someone here knows.
  >
  > 73,
  >
  > Dave, AA6YQ
  >
  >

DXKeeper // County Problem

Richard J. Fiero II W5TFW

#72171

Thanks Fellows,

  I am NOT a County Hunter I just wanted to stop my logbook from  flashing !

                                                            Joey

Show quoted text

----- Original Message ----- 
  From: Rick Scott 
  To: dxlab@... 
  Sent: Monday, September 14, 2009 2:28 PM
  Subject: Re: [dxlab] Re: DXKeeper // County Problem

    Norfolk is an Independent City (IE its not part of a county, there are 17 such in Virginia) and as such is covered under this rule

  4. In the case of cities, parks, or reservations not within counties proper, applicants may claim any one of the adjoining counties for credit (once).

  (in other words you need to pick which county Norfolk adjoins to claim credit and cannot use it for other counties)

  ________________________________
  From: aa6yq <aa6yq@...>
  To: dxlab@...
  Sent: Monday, September 14, 2009 12:20:09 PM
  Subject: [dxlab] Re: DXKeeper // County Problem

  The authoritative source for US counties cited in ADIF (and thus used by DXKeeper) is

  < .com/counties. htm>

  As you can see, "Norfolk City" is not listed. You could ask the folks at countyhunter. com how QSOs with Norfolk City should be recorded, or perhaps someone here knows. 

  73,

  Dave, AA6YQ

  --- In dxlab@yahoogroups. com, "Richard J. Fiero II W5TFW" <joeyw5tfw@. ..> wrote:
  >
  > I seem to have some confusion, the CALL N4FI is in Norfolk City
  > County, but its not listed as a county in dx keeper ? I did a google 
  > search and thats the county it is listed as. 
  > 
  > any ideals ?
  > 
  > Thanks, Joey
  > 
  > 
  > 
  > A.R.S. W5TFW
  > Richard J. Fiero II
  > www.w5tfw.com
  > www.6mt.com
  > 
  > Life's Tough,...... Its even tougher if you are Stupid !
  > 
  > John Wayne
  > 
  > 
  >

Re: DXKeeper // County Problem

#72170

The following is a copy of the rule posted on the CQ magazine site:

"C. County identity
4. In the case of cities, parks, or reservations not within counties proper, applicants may claim any one of the adjoining counties for credit (once)."

In other words if you live in an independent city the award applicant can decide which nearby county he want is to count for.

Virgina has the most of these but I believe that Carson City, NV and Baltimore MD are also independent cities. There is a Baltimore county in MD but the city of Baltimore is not within it - and you thought you were confused :-)

73, Rich - W3ZJ

aa6yq wrote:

Show quoted text

The authoritative source for US counties cited in ADIF (and thus used by DXKeeper) is

<>

As you can see, "Norfolk City" is not listed. You could ask the folks at countyhunter.com how QSOs with Norfolk City should be recorded, or perhaps someone here knows.

   73,

       Dave, AA6YQ

Re: DXKeeper // County Problem

#72169

Norfolk is an Independent  City (IE its not part of a county, there are 17 such in Virginia) and as such is covered under this rule

4. In the case of cities, parks, or reservations not within counties proper, applicants may claim any one of the adjoining counties for credit (once).

(in other words you need to pick which county Norfolk adjoins to claim credit and cannot use it for other counties)

________________________________
From: aa6yq <aa6yq@...>
To: dxlab@...
Sent: Monday, September 14, 2009 12:20:09 PM
Subject: [dxlab] Re: DXKeeper // County Problem

The authoritative source for US counties cited in ADIF (and thus used by DXKeeper) is

< .com/counties. htm>

As you can see, "Norfolk City" is not listed. You could ask the folks at countyhunter. com how QSOs with Norfolk City should be recorded, or perhaps someone here knows. 

73,

Dave, AA6YQ

--- In dxlab@yahoogroups. com, "Richard J. Fiero II W5TFW" <joeyw5tfw@. ..> wrote:

I seem to have some confusion, the CALL  N4FI  is in Norfolk City
County, but its not listed as a county in dx keeper ?  I did a google 
search and thats the county it is listed as. 

 any ideals ?

                                                                  Thanks, Joey

                                              A.R.S. W5TFW
                                             Richard J. Fiero II
www.w5tfw.com
www.6mt.com

  Life's Tough,...... Its even tougher if you are Stupid !

                                           John Wayne

Re: DXKeeper // County Problem

#72168

The authoritative source for US counties cited in ADIF (and thus used by DXKeeper) is

<>

As you can see, "Norfolk City" is not listed. You could ask the folks at countyhunter.com how QSOs with Norfolk City should be recorded, or perhaps someone here knows.

   73,

       Dave, AA6YQ

Show quoted text

--- In dxlab@..., "Richard J. Fiero II W5TFW" <joeyw5tfw@...> wrote:

I seem to have some confusion, the CALL  N4FI  is in Norfolk City
County, but its not listed as a county in dx keeper ?  I did a google
search and thats the county it is listed as.

 any ideals ?

                                                                  Thanks, Joey



                                              A.R.S. W5TFW
                                             Richard J. Fiero II
                                             www.w5tfw.com
                                              www.6mt.com

  Life's Tough,...... Its even tougher if you are Stupid !

                                           John Wayne

[Non-text portions of this message have been removed]

DXKeeper // County Problem

Richard J. Fiero II W5TFW

#72167

I seem to have some confusion, the CALL  N4FI  is in Norfolk City
County, but its not listed as a county in dx keeper ?  I did a google 
search and thats the county it is listed as. 

 any ideals ?

                                                                  Thanks, Joey



                                              A.R.S. W5TFW
                                             Richard J. Fiero II
                                             www.w5tfw.com
                                              www.6mt.com

  Life's Tough,...... Its even tougher if you are Stupid !

                                           John Wayne

Re: Application Updates

FireBrick

#72166

Hmmm
I do it the other, I never turn off Launcher, but it's minimized and not visible.
The DXLsuite runs 24/7.
So an option to automagically perform an update check and then blink if an update is available.
(or some sort of message) could be good.

so after typing the above, I checked for the heck of it and sure enough there are LoTW & eQSL updates.

Show quoted text

On 9/14/2009 9:14:07 AM, Michael Morgan (michael@...) wrote:
Dave,
Not sure if this is on your enhancement list.  But I find most of the
time
I leave the launcher app running all the time on the side of the screen.
It
appears that your check for new apps/db is just run when the launcher is
first loaded.  Have you considered having it perform an update check at a
user specified interval?  I find now when I get an email notification I
close and reopen launcher to be able to check for new apps or click the
new?
button.  Not a biggie, just a suggestion.

Thanks again for the great application suite and the rapid support
response.

73's

Michael, AA5SH

-----Original Message-----
From: dxlab@... [mailto:dxlab@...] On Behalf Of Dave
AA6YQ
Sent: Sunday, September 13, 2009 10:01 PM
To: dxlab@...
Subject: RE: [dxlab] LoTW user list 13/09/2009

Updated eQSL AG and LotW participant databases are available via the
Databases tab of DXView's
Config window.

Gracie, Renzo.

73,

Dave, AA6YQ




------------------------------------

Yahoo! Groups Links

Re: Application Updates

#72165

Click on "Config" button for the launcher and then the "New" button on the Config window and it will check for you.
Not automatic but simple to do.

73, Larry  W6NWS

Show quoted text

----- Original Message ----- 
  From: Michael Morgan 
  To: dxlab@... 
  Sent: Monday, September 14, 2009 10:14 AM
  Subject: [dxlab] Application Updates


    Dave,
  Not sure if this is on your enhancement list. But I find most of the time
  I leave the launcher app running all the time on the side of the screen. It
  appears that your check for new apps/db is just run when the launcher is
  first loaded. Have you considered having it perform an update check at a
  user specified interval? I find now when I get an email notification I
  close and reopen launcher to be able to check for new apps or click the new?
  button. Not a biggie, just a suggestion.

  Thanks again for the great application suite and the rapid support response.

  73's

  Michael, AA5SH

  -----Original Message-----
  From: dxlab@... [mailto:dxlab@...] On Behalf Of Dave
  AA6YQ
  Sent: Sunday, September 13, 2009 10:01 PM
  To: dxlab@...
  Subject: RE: [dxlab] LoTW user list 13/09/2009

  Updated eQSL AG and LotW participant databases are available via the
  Databases tab of DXView's Config window.

  Gracie, Renzo.

  73,

  Dave, AA6YQ

Application Updates

Michael Morgan

#72164

Dave,
  Not sure if this is on your enhancement list.  But I find most of the time
I leave the launcher app running all the time on the side of the screen.  It
appears that your check for new apps/db is just run when the launcher is
first loaded.  Have you considered having it perform an update check at a
user specified interval?  I find now when I get an email notification I
close and reopen launcher to be able to check for new apps or click the new?
button.  Not a biggie, just a suggestion.

Thanks again for the great application suite and the rapid support response.

73's

Michael, AA5SH

Show quoted text

-----Original Message-----
From: dxlab@... [mailto:dxlab@...] On Behalf Of Dave
AA6YQ
Sent: Sunday, September 13, 2009 10:01 PM
To: dxlab@...
Subject: RE: [dxlab] LoTW user list 13/09/2009

Updated eQSL AG and LotW participant databases are available via the
Databases tab of DXView's Config window.

Gracie, Renzo.

    73,

        Dave, AA6YQ

Re: Windows 7 Resend with Spell Check auto on now :-)

rojomn

#72163

I have tried several different drivers. Some were recommended on Windows
Live and also the latest form the factory and none work on Windows 7 so it
seems I will need new hardware. I tried the device on my Laptop running
Vista and it works perfectly. Obviously there is a driver problem and I have
my doubts that a solution is coming any time soon. I even got a BSOD when
disconnected cable while program was running.



Gil, W0MN 
N 44.082147  W 92.513085 1050' EN34rb
Hierro Candente, Batir de repente

Show quoted text

-----Original Message-----
From: dxlab@... [mailto:dxlab@...] On Behalf Of
rojomn
Sent: Sunday, September 13, 2009 9:34 PM
To: dxlab@...
Subject: RE: [dxlab] Re: Windows 7 Resend with Spell Check auto on now
:-)

Here is the driver usage document. It seems to indicate that it should
work
o W7. I will keep trying. I don't know if I will get anywhere but
according
to this it passes all of Microsoft testing.

I am on build 7600 of W7. If anyone has been able to make Commander
work on
W7 with USB-Serial what one did you use and did you have to upgrade the
drivers?


PL-2303 Driver Setup Installer, Prolific Edition
Setup Installer Revision Note History
=================================================

System Requirement:
  . Supports the following Windows OSes:
	- Windows 98SE
	- Windows ME
	- Windows 2000 SP4
	- Windows XP SP2 and above (32 & 64 bit)
	- Windows Server 2003 (32 & 64 bit)
	- Windows Server 2008 (32 & 64 bit)
	- Windows Vista (32 & 64 bit)
	- Windows 7 (32 & 64 bit)
    	  NOTE: For Windows 7, please use RC build 7100 or above.
  . USB host controller
  . Device using PL-2303H/HX/X version chip


Supported device ID and product strings:
  . VID_067B&PID_2303 for "Prolific USB-to-Serial Comm Port"


Release Notes:
---------------
PL2303 Driver Installer v1.0.5.18
  Changes from Installer v1.0.3.11:
    . XP/2K/2003 (WDM Driver) v2.0.9.122:
	- supports both 32 and 64 bit OS
	- pass Microsoft XP Windows Logo Test (WLK 1.4)
    . Vista/7/2008 (WDF Driver) v3.3.5.122:
	- pass Microsoft Vista/Win7 Logo Test (WLK 1.4)

   Installer & Build date: 1.0.5.18_20090723

   Language Support:
	- English (default)
	- Chinese (Traditional)
	- Chinese (Simplified)
	- Japanese



========================================
Prolific Technology Inc.






Gil, W0MN 
N 44.082147  W 92.513085 1050' EN34rb
Hierro Candente, Batir de repente
-----Original Message-----
From: dxlab@... [mailto:dxlab@...] On BehalfOf
Gil rojomn
Sent: Sunday, September 13, 2009 7:25 PM
To: dxlab@...
Subject: RE: [dxlab] Re: Windows 7 Resend with Spell Check auto onnow
:-)

I did download the latest driver. Perhaps the driver is not correctbut
it
is digitally signed which is usually a good sign. Strange thatWindows
says
it is working correctly and that it can send but not receive. I amsure
people are going to have a lot of problems with hardware just as they
did
switching to Vista. This device is the only one I have that I havehad
trouble with other than the PCI Serial card which I have been using
since XP
but not drive seems to be available for W7. The XP driver worked for
Vista.
Sort of give the lie to the statement that if it worked in Vista it
will
work in W&. Where have I heard such things before. :-)

-----Original Message-----
From: dxlab@... [mailto:dxlab@...] On BehalfOf
aa6yq
Sent: Sunday, September 13, 2009 7:14 PM
To: dxlab@...
Subject: [dxlab] Re: Windows 7

My recollection is that "program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device" is the result of a serial port driver
defect. Try
downloading the manufacturers latest driver.

    73,

         Dave, AA6YQ

--- In dxlab@..., "Gil Charter" <rojomn@...> wrote:

I installed Windows 7 and am testing the programs. I am using ProLogic
USB-Serial converter with the automatically found by windowsdriver.



It partially works. I can change the radio frequency and switchTX/RX
but
it
fails to read the frequency form the radio.



I am using 4800 with 2 stop bits and hardware flow control buttrying
RTS
always on made no change.





The error log is attached.




  ----------


13-Sep-2009 19:49:58 > CI-V Commander version 7.9.2
13-Sep-2009 19:49:58 > App.Path        : C:&#92;Program Files(x86)&#92;DXLab
Suite&#92;Commander
13-Sep-2009 19:49:58 > App.exe         : CI-V Commander
13-Sep-2009 19:49:58 > Operating System: Vista build 7600
13-Sep-2009 19:49:58 > Country         : United States
13-Sep-2009 19:49:58 > Language        : English (United States)
13-Sep-2009 19:49:58 > DXLab Apps      :
13-Sep-2009 19:49:58 > LocaleInfo.Initialize: decimal symbol:
,
[ascii 44]
13-Sep-2009 19:49:58 > LocaleInfo.Initialize: digit groupingsymbol:
.
[ascii 46]
13-Sep-2009 19:49:58 > LocaleInfo.Initialize: date separator:
/
[ascii 47]
13-Sep-2009 19:49:58 > LocaleInfo.Initialize: time separator:
:
[ascii 58]
13-Sep-2009 19:49:58 > CIVMessages.Form_Load
13-Sep-2009 19:49:58 > Common.RestoreWindowPosition: CIVMessages,DualMonitor = True
13-Sep-2009 19:49:58 >    from registry = (9690, 5100, 9015, 5595)
13-Sep-2009 19:49:58 >    restored to   = (9690, 5100, 9015, 5595)
13-Sep-2009 19:49:58 >    WindowState   = 0
13-Sep-2009 19:49:58 > CIVMessages.Form_Load complete
13-Sep-2009 19:49:58 > CIVComm.Form_Load
13-Sep-2009 19:49:58 > CIVComm.Form_Load complete
13-Sep-2009 19:49:58 > UserCommandSequenceDefinition.Form_Load
13-Sep-2009 19:49:58 > Common.RestoreWindowPosition:UserCommandSequenceDefinition, DualMonitor = True
13-Sep-2009 19:49:58 >    from registry = (125, 125, 11265, 8670)
13-Sep-2009 19:49:58 >    restored to   = (125, 125, 11265, 8670)
13-Sep-2009 19:49:58 >    WindowState   = 0
13-Sep-2009 19:49:58 > UserCommandSequenceDefinition.Form_Loadcomplete
13-Sep-2009 19:49:58 > CIVMain.Form_load: forms loaded
13-Sep-2009 19:49:58 > CIVModule.Initialize: start
13-Sep-2009 19:49:58 > CIVModule.Initialize, CI-V Preamble =?(254),
CI-V
Postamble = ?(253), CI-V Success = ?(251), CI-V Failure = ú(250),
ControllerID = à(224)
13-Sep-2009 19:49:58 > CIVModule.Initialize, CI-V code lengths = 1,1, 1,
1, 1
13-Sep-2009 19:49:58 >    InterrogateKey = T
13-Sep-2009 19:49:58 > CIVConfig.Interrogation_Click,Interrogation.Value
= 1
13-Sep-2009 19:49:58 > CIVConfig.Interrogation_Click: interrogationenabled, interval =
13-Sep-2009 19:49:58 > CIVConfig.PollInterval_Change: poll interval=
10
13-Sep-2009 19:49:58 > CIVModule.LoadRadioInfo:Common.InitializeTooltips
is true
13-Sep-2009 19:49:58 > CIVModule.LoadRadioInfo: Tooltips Checkboxalready
checked; restoring tooltips
13-Sep-2009 19:49:58 > CIVModule.Initialize: radio info loaded
13-Sep-2009 19:49:58 > CIVModule.Initialize: commport initialized
13-Sep-2009 19:49:58 > CIVModule.Initialize: radix selectioncomplete
13-Sep-2009 19:49:58 > CIVModule.Initialize: radio setting =KENWOOD
13-Sep-2009 19:49:58 > CIVModule.Initialize: bands initialized
13-Sep-2009 19:49:58 > CIVModule.Initialize: User Sequences loaded
13-Sep-2009 19:49:58 > CIVModule.Initialize: CurrentXcvr = -1
13-Sep-2009 19:49:58 > ParallelPortModule.Setup
13-Sep-2009 19:49:58 > ParallelPortModule.SelectRadio, Transmitting=
False
13-Sep-2009 19:49:58 > ParallelPortModule.SelectRadio, Transmitting=
False
13-Sep-2009 19:49:58 > CIVModule.UpdateRadio: Start
13-Sep-2009 19:49:58 > CIVMain.AltFreqDisplay_Change,AltFreqDisplay
=
13-Sep-2009 19:49:58 > CIVMain.AltFreqDisplay_Change complete
13-Sep-2009 19:49:58 > CIVModule.LoadMemories
13-Sep-2009 19:49:58 >    memories
13-Sep-2009 19:49:58 >       mem = 1, freq = 3,584.50, mode = 1,filter =
, split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 2, freq = 7,070.00, mode = 1,filter =
, split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 3, freq = 10,140.00, mode = 1,filter =
, split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 4, freq = 14,070.50, mode = 1,filter =
, split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 5, freq = 18,106.00, mode = 1,filter =
, split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 6, freq = 21,070.00, mode = 1,filter =
, split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 7, freq = 24,919.50, mode = 1,filter =
, split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 8, freq = 28,120.00, mode = 1,filter =
, split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 9, freq = .00, mode = 2, filter=
,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 10, freq = .00, mode = 2, filter=
,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 11, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 12, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 13, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 14, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 15, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 16, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 17, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 18, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 19, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 20, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 21, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 22, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 23, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 24, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 25, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 26, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 27, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 28, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 29, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 30, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 31, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 32, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 33, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 34, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 35, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 36, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 37, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 38, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 39, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 40, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 41, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 42, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 43, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 44, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 45, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 46, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 47, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 48, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 49, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 50, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 51, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 52, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 53, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 54, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 55, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 56, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 57, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 58, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 59, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 60, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 61, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 62, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 63, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 64, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 65, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 66, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 67, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 68, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 69, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 70, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 71, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 72, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 73, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 74, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 75, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 76, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 77, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 78, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 79, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 80, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 81, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 82, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 83, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 84, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 85, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 86, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 87, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 88, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 89, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 90, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 91, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 92, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 93, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 94, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 95, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 96, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 97, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 98, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 99, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >       mem = 100, freq = , mode = 11, filter=
Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:58 >    mode selectors
13-Sep-2009 19:49:58 >       LSB
13-Sep-2009 19:49:58 >       USB
13-Sep-2009 19:49:58 >       AM
13-Sep-2009 19:49:58 >       CW
13-Sep-2009 19:49:58 >       RTTY
13-Sep-2009 19:49:58 >       FM
13-Sep-2009 19:49:58 >       WBFM
13-Sep-2009 19:49:58 >       CW-R
13-Sep-2009 19:49:58 >       RTTY-R
13-Sep-2009 19:49:58 >       PKT
13-Sep-2009 19:49:58 >       PKT-R
13-Sep-2009 19:49:59 > CIVModule.SetCurrentMemoryBank, theBank = 0
13-Sep-2009 19:49:59 > CIVModule.UpdateRadio: Memories loaded
13-Sep-2009 19:49:59 > CIVModule.UpdateRadio: Filter Settingsinitialized
13-Sep-2009 19:49:59 > CIVModule.UpdateRadio: found radio modelKENWOOD
13-Sep-2009 19:49:59 > CIVModule.ConfigureCommPort
13-Sep-2009 19:49:59 >    Model = KENWOOD
13-Sep-2009 19:49:59 >    RadioSerialPort(CurrentRadioIndex) = True
13-Sep-2009 19:49:59 > CIVComm.OpenPort, Port = 3
13-Sep-2009 19:49:59 > CIVModule.Initialize: commport configured
13-Sep-2009 19:49:59 > CIVModule.UpdateRadio: model-independentinitialization complete
13-Sep-2009 19:49:59 > CIVModule.UpdateRadio: supplier: K
13-Sep-2009 19:49:59 > CIVModule.UpdateRadio: sending Kenwood modelID
command
13-Sep-2009 19:49:59 > CIVModule.SendCommand: Asc = I D ;
13-Sep-2009 19:49:59 > CIVModule.SendCommand: Asc = I D ;
13-Sep-2009 19:49:59 > CIVModule.SetCurrentMemoryBank, theBank = 0
13-Sep-2009 19:49:59 > CIVModule.UpdateRadio: model-dependentinitialization complete
13-Sep-2009 19:49:59 > CIVModule.UpdateRadio: CmdBuffer initialized
13-Sep-2009 19:49:59 > CIVModule.RequestVFOB
13-Sep-2009 19:49:59 > CIVModule.EnqueueXcvrCmd: Command = Wait
13-Sep-2009 19:49:59 > CIVModule.EnqueueXcvrCmd: Command = RequestFrequency
13-Sep-2009 19:49:59 > CIVModule.EnqueueXcvrCmd: Command = Wait
13-Sep-2009 19:49:59 > CIVModule.EnqueueXcvrCmd: Command = RequestMode
13-Sep-2009 19:49:59 > CIVModule.UpdateRadio: Interrogationcomplete
13-Sep-2009 19:49:59 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:49:59 > CIVModule.ExecuteNextXcvrCmd: 18 [Wait] F =0,
M =
0, A = 0, A2 = 0
13-Sep-2009 19:49:59 > CIVModule.ExecuteNextXcvrCmd: 10 [RequestFrequency] F = 0, M = 0, A = 0, A2 = 0
13-Sep-2009 19:49:59 >    CIVFreqSync = true
13-Sep-2009 19:49:59 > CIVModule.SendCommand: Asc = F A ;
13-Sep-2009 19:49:59 > CIVModule.ExecuteNextXcvrCmd: 18 [Wait] F =0,
M =
0, A = 0, A2 = 0
13-Sep-2009 19:49:59 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:49:59 > CIVModule.ExecuteNextXcvrCmd: 11 [RequestMode] F =
0, M = 0, A = 0, A2 = 0
13-Sep-2009 19:49:59 > CIVModule.SendCommand: Asc = M D ;
13-Sep-2009 19:49:59 > CIVModule.InitializeMultiXcvr: CurrentXcvr =-
1
13-Sep-2009 19:49:59 > ParallelPortModule.SelectRadio, Transmitting=
False
13-Sep-2009 19:49:59 > CIVModule.Initialize: multiple transceiverstructures initialize
13-Sep-2009 19:49:59 > CIVModule.UpdateRadio: Start
13-Sep-2009 19:49:59 > CIVModule.LoadMemories
13-Sep-2009 19:49:59 >    memories
13-Sep-2009 19:49:59 >       mem = 1, freq = 3,584.50, mode = 1,filter =
, split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 2, freq = 7,070.00, mode = 1,filter =
, split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 3, freq = 10,140.00, mode = 1,filter =
, split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 4, freq = 14,070.50, mode = 1,filter =
, split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 5, freq = 18,106.00, mode = 1,filter =
, split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 6, freq = 21,070.00, mode = 1,filter =
, split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 7, freq = 24,919.50, mode = 1,filter =
, split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 8, freq = 28,120.00, mode = 1,filter =
, split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 9, freq = .00, mode = 2, filter=
,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 10, freq = .00, mode = 2, filter=
,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 11, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 12, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 13, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 14, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 15, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 16, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 17, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 18, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 19, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 20, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 21, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 22, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 23, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 24, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 25, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 26, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 27, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 28, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 29, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 30, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 31, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 32, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 33, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 34, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 35, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 36, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 37, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 38, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 39, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 40, freq = , mode = -1, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 41, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 42, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 43, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 44, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 45, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 46, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 47, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 48, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 49, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 50, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 51, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 52, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 53, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 54, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 55, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 56, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 57, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 58, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 59, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 60, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 61, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 62, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 63, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 64, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 65, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 66, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 67, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 68, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 69, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 70, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 71, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 72, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 73, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 74, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 75, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 76, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 77, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 78, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 79, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 80, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 81, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 82, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 83, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 84, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 85, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 86, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 87, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 88, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 89, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 90, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 91, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 92, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 93, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 94, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 95, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 96, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 97, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 98, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 99, freq = , mode = 11, filter =Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >       mem = 100, freq = , mode = 11, filter=
Wide,
split = 0, ham = 0, dual = 0
13-Sep-2009 19:49:59 >    mode selectors
13-Sep-2009 19:49:59 >       LSB
13-Sep-2009 19:49:59 >       USB
13-Sep-2009 19:49:59 >       AM
13-Sep-2009 19:49:59 >       CW
13-Sep-2009 19:49:59 >       RTTY
13-Sep-2009 19:49:59 >       FM
13-Sep-2009 19:49:59 >       WBFM
13-Sep-2009 19:49:59 >       CW-R
13-Sep-2009 19:49:59 >       RTTY-R
13-Sep-2009 19:49:59 >       PKT
13-Sep-2009 19:49:59 >       PKT-R
13-Sep-2009 19:49:59 > CIVModule.SetCurrentMemoryBank, theBank = 0
13-Sep-2009 19:49:59 > CIVModule.UpdateRadio: Memories loaded
13-Sep-2009 19:49:59 > CIVModule.UpdateRadio: Filter Settingsinitialized
13-Sep-2009 19:49:59 > CIVModule.UpdateRadio: found radio modelKENWOOD
13-Sep-2009 19:49:59 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:49:59 > CIVModule.ConfigureCommPort
13-Sep-2009 19:49:59 >    Model = KENWOOD
13-Sep-2009 19:49:59 >    RadioSerialPort(CurrentRadioIndex) = True
13-Sep-2009 19:49:59 > CIVComm.OpenPort, Port = 3
13-Sep-2009 19:50:00 > CIVModule.Initialize: commport configured
13-Sep-2009 19:50:00 > CIVModule.UpdateRadio: model-independentinitialization complete
13-Sep-2009 19:50:00 > CIVModule.UpdateRadio: supplier: K
13-Sep-2009 19:50:00 > CIVModule.UpdateRadio: sending Kenwood modelID
command
13-Sep-2009 19:50:00 > CIVModule.SendCommand: Asc = I D ;
13-Sep-2009 19:50:00 > CIVModule.SendCommand: Asc = I D ;
13-Sep-2009 19:50:00 > CIVModule.SetCurrentMemoryBank, theBank = 0
13-Sep-2009 19:50:00 > CIVModule.UpdateRadio: model-dependentinitialization complete
13-Sep-2009 19:50:00 > CIVModule.UpdateRadio: CmdBuffer initialized
13-Sep-2009 19:50:00 > CIVModule.RequestVFOB
13-Sep-2009 19:50:00 > CIVModule.Initialize: UpdateRadio complete
13-Sep-2009 19:50:00 > CIVModule.Initialize: devices loaded
13-Sep-2009 19:50:00 > CIVModule.EnqueueXcvrCmd: Command = Wait
13-Sep-2009 19:50:00 > CIVModule.EnqueueXcvrCmd: Command = RequestFrequency
13-Sep-2009 19:50:00 > CIVModule.EnqueueXcvrCmd: Command = Wait
13-Sep-2009 19:50:00 > CIVModule.EnqueueXcvrCmd: Command = RequestMode
13-Sep-2009 19:50:00 > CIVModule.Initialize: Caption updated
13-Sep-2009 19:50:00 > Common.RestoreWindowPosition: CIVMain,DualMonitor
= True
13-Sep-2009 19:50:00 >    from registry = (-20700, 5295, 8400,5576)
13-Sep-2009 19:50:00 >    restored to   = (-20700, 5295, 8400,5576)
13-Sep-2009 19:50:00 >    WindowState   = 0
13-Sep-2009 19:50:00 > CIVModule.Initialize: complete
13-Sep-2009 19:50:00 > ParallelPortModule.Initialize
13-Sep-2009 19:50:00 > CIVMain.Form_load: CIVModule intialized
13-Sep-2009 19:50:00 > CIVMain.Form_load: DDEServerModuleinitialized
13-Sep-2009 19:50:00 > DDEServer.LinkExecute: 000test
13-Sep-2009 19:50:00 > CIVMain.SetMainXmitFreq split disabled,XmitFreq =
000,000.00
13-Sep-2009 19:50:00 > CIVMain.SetMainRcvFreq, RcvFreq = 000,000.00
13-Sep-2009 19:50:00 > CIVMain.SetMainXmitFreq complete
13-Sep-2009 19:50:00 > CIVModule.ExecuteNextXcvrCmd: 18 [Wait] F =0,
M =
0, A = 0, A2 = 0
13-Sep-2009 19:50:00 > CIVModule.ExecuteNextXcvrCmd: 10 [RequestFrequency] F = 0, M = 0, A = 0, A2 = 0
13-Sep-2009 19:50:00 >    CIVFreqSync = true
13-Sep-2009 19:50:00 > CIVModule.SendCommand: Asc = F A ;
13-Sep-2009 19:50:00 > CIVModule.ExecuteNextXcvrCmd: 18 [Wait] F =0,
M =
0, A = 0, A2 = 0
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > CIVModule.ExecuteNextXcvrCmd: 11 [RequestMode] F =
0, M = 0, A = 0, A2 = 0
13-Sep-2009 19:50:00 > CIVModule.SendCommand: Asc = M D ;
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > CIVModule.ExecuteNextXcvrCmd, Idle Mode = 0
13-Sep-2009 19:50:00 > CIVModule.SendCommand: Asc = I D ;
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > CIVModule.ExecuteNextXcvrCmd, Idle Mode = 1
13-Sep-2009 19:50:00 > CIVModule.SendCommand: Asc = I F ;
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > CIVModule.ExecuteNextXcvrCmd, Idle Mode = 2
13-Sep-2009 19:50:00 > CIVModule.SendCommand: Asc = I F ;
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > CIVModule.ExecuteNextXcvrCmd, Idle Mode = 3
13-Sep-2009 19:50:00 > CIVModule.SendCommand: Asc = I F ;
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > CIVModule.ExecuteNextXcvrCmd, Idle Mode = 4
13-Sep-2009 19:50:00 > CIVModule.SendCommand: Asc = F B ;
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > CIVModule.ExecuteNextXcvrCmd, Idle Mode = 0
13-Sep-2009 19:50:00 > CIVModule.SendCommand: Asc = I D ;
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > CIVModule.ExecuteNextXcvrCmd, Idle Mode = 1
13-Sep-2009 19:50:00 > CIVModule.SendCommand: Asc = I F ;
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:00 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:01 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:01 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:01 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:01 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:01 > program error 8020 in moduleCIVComm.ReadPort:
Error reading comm device
13-Sep-2009 19:50:01 > program error 8020 in moduleCIVComm.ReadPort:
Error readi

开云体育