开云体育

In DXKeeper, check the "Config" button. Then "QSL Config" on the lower left corner. In the "DXKeeper QSL Configuration" window, select the "LoTW" tab. What is the "TQSL" area labeled? (Mine says "TQSL

Every time DXLab Suite starts, I get the message "A new TQSL (V2.8.1) is available". I am already running that version. Any suggstions as to how to address this? Thanks, Roger EI8KN.

Will do, thanks!

There is no CAT instruction set info in any of the documentation at: <https://yaesu.com/product-detail.aspx?Model=FTX-1%20Series&CatName=HF%20Transceivers/Amplifiers> 73, ... Joe, W4TV

+ AA6YQ comments below + From what URL can I download documentation for this radio's CAT instruction set? 73, Dave, AA6YQ

The referenced yaesu link shows: "We are pleased to introduce the new FTX-1F and FTX-1Optima" "FTX-1Field is a Portable 6W or 10W* HF/50MHz/VHF/UHF Multimode Transceiver. (*10w with 13.8VDC supply.)"

+ AA6YQ comments below will dxlab support the new ftx-1? + I can't find any information about the FTX-1 on Yaesu's web site: https://www.yaesu.com/ + My understanding is that FTX-1 is a receiver that

+ AA6YQ comments below My transceiver is an IC7300. I am on FT8 with WSJT. A CW DX spot comes out, and I double-click in spot collector. Commander changes to the correct frequency, mode, and filter

I have observed this behavior while never noticing it before. My transceiver is an IC7300.? I am on FT8 with WSJT.? A CW DX spot comes out, and I double-click in spot collector.? Commander changes

+ AA6YQ comments below When I post to the Cluster (using SpotCollector) the audio alarm readout says "Grid Square FO93" included in the announcement. First of all: 1. F093 is wrong, and no matter what

will dxlab support the new ftx-1? thanks Reggie k6xr

When I post to the Cluster (using SpotCollector) the audio alarm readout says "Grid Square FO93" included in the announcement. First of all: 1. F093 is wrong, and no matter what Call is Spotted, the

+ AA6YQ comments below. You'd have to account for the fact that some parks are in multiple counties, states, and even grids. + The downloadable POTA park definition file specifies the following for

You'd have to account for the fact that some parks are in multiple counties, states, and even grids. Earl / KD5XB Sent from Proton Mail Android

The ability for SpotCollector to lookup a park's location would be very welcomed! Currently, I plug the POTA designator into the pota.app site so I can see on a map where it is. If it's in the same

+ AA6YQ comments below Been thinking about this a lot today as I have been chasing POTA on 20m FT8. My overall goal is to work ATNO's first and then whoever else is activating second (who may be

+ AA6YQ comments below I'll argue that when activators submit logs to LotW and don't create and use appropriate locations it may "hurt" grid or County hunters, and if in a different state or country,

Been thinking about this a lot today as I have been chasing POTA on 20m FT8.? My overall goal is to work ATNO's first and then whoever else is activating second (who may be activating multiples and

I'll argue that when activators submit logs to LotW and don't create and use appropriate locations it may "hurt" grid or County hunters, and if in a different state or country, it may "hurt" WAS or

+ AA6YQ comments below + You reported that the new misbehavior first occurred after a Windows update, so the initial hypothesis is that this update reduced your system's ability to handle the