Thanks, Joe. Got it, just waiting to see if this works.
It's really irritating to get all excited and na rush, just to realize it's somebody begging.
7 3
Earl / KD5XB
Sent with Proton Mail secure email.
toggle quoted message
Show quoted text
On Monday, May 26th, 2025 at 3:53 PM, Joe Subich, W4TV <lists@...> wrote: On 2025-05-26 5:21 PM, Earl Needham via groups.io wrote:
Do you already have the command built for DXSpider?
Not specifically ...
However, one of my DXSpider filters rejects spots with certain
words in the comments:
reject/spots info heard,lid,bust
easy enough to replace or add pse to the list of rejected words.
73,
... Joe, W4TV
On 2025-05-26 5:21 PM, Earl Needham via groups.io wrote:
On Monday, May 26th, 2025 at 3:02 PM, Joe Subich, W4TV lists@... wrote:
It is most effective to filter spots of that ilk directly on
the cluster but the filter commands vary depending on which
of the three major cluster software packages is being used. Do you already have the command built for DXSpider?
Thanks,
Earl / KD5XB
Sent with Proton Mail secure email.
|
On 2025-05-26 5:21 PM, Earl Needham via groups.io wrote: Do you already have the command built for DXSpider? Not specifically ... However, one of my DXSpider filters rejects spots with certain words in the comments: reject/spots info heard,lid,bust easy enough to replace or add pse to the list of rejected words. 73, ... Joe, W4TV On 2025-05-26 5:21 PM, Earl Needham via groups.io wrote: On Monday, May 26th, 2025 at 3:02 PM, Joe Subich, W4TV <lists@...> wrote:
It is most effective to filter spots of that ilk directly on
the cluster but the filter commands vary depending on which
of the three major cluster software packages is being used. Do you already have the command built for DXSpider?
Thanks,
Earl / KD5XB
Sent with Proton Mail secure email.
|
How does Remote Desktop respond to 2 monitor configuration?
I'm using a single monitor and can't take it anymore.? I'm adding a second monitor.? I have a question that maybe someone can answer.? I do most of my operating from a remote PC, using Windows Remote Desktop to access my shack PC.? If I add a second monitor in the shack and configure DXlab to use two monitors, what happens if I remote in with a Remote Desktop session that is set up for a single monitor.? Does DXlab detect a single monitor state and move everything back to that desktop, or will I miss seeing everything that the local desktop has on the second monitor?
?
73,
Dean W8ZF
|
ADIF field names supported by DXKeeper
Different ham radio computer logging programs appear to have different degrees of ADIF support, and I'm interested in understanding the impact of those differences in a number of areas:
?
- data transfer between ham logging applications
- QSL'ing and award tracking
- use of application-defined fields
?
I'm looking for a list of ADIF field names supported by DXKeeper. ?I found this cross-reference of DXKeeper Log Items with ADIF field names:
?
?
Does that include all of the supported ADIF field names?
?
Steve, N5EP
?
|
Re: Upload QSO to Club Log timed out
Just tried and it is working as expected logging from Capture window.
+ AA6YQ comments below
For the past day or so I have been seeing this message when logging via the Capture window.?
"Upload QSO to Club Log timed out"
My Clublog account works, I can log in to their website and see my data.
If I right-click from the log QSO's tab and choose upload to ClubLog I get the same error message.
If I wait for the upload to time out I can go to the QSL Tab, select ClubLog and click the Upload to ClubLog button and get the message "succeeded: 23 QSOs uploaded."
So, DXKeeper seems to be communicating with ClubLog for bulk uploads via the QSL tab but not via the Capture window on Log QSO's tab for single uploads.
No error log in menu bar.
+ I just tried a single-QSO upload to Clublog here and it worked correctly. Please try again.
? ? ? ?73,
? ? ? ? ? ? ? ?Dave, AA6YQ
|
Re: Upload QSO to Club Log timed out
Me too, transient condition on upload to Cluplog.
On Mon, May 26, 2025 at 12:06?PM Joe Subich, W4TV via <lists= [email protected]> wrote:
It's a transient connection issue.? I've seen it on and off
over the last weekend.
73,
? ? ... Joe, W4TV
On 2025-05-26 12:07 PM, Dave AA6YQ wrote:
> + AA6YQ comments below
>
> For the past day or so I have been seeing this message when logging via the Capture window.
> "Upload QSO to Club Log timed out"
>
> My Clublog account works, I can log in to their website and see my data.
> If I right-click from the log QSO's tab and choose upload to ClubLog I get the same error message.
>
> If I wait for the upload to time out I can go to the QSL Tab, select ClubLog and click the Upload to ClubLog button and get the message "succeeded: 23 QSOs uploaded."
>
> So, DXKeeper seems to be communicating with ClubLog for bulk uploads via the QSL tab but not via the Capture window on Log QSO's tab for single uploads.
>
> No error log in menu bar.
>
> + I just tried a single-QSO upload to Clublog here and it worked correctly. Please try again.
>
>? ? ? ? ?73,
>
>? ? ? ? ? ? ? ? ?Dave, AA6YQ
>
|
Can I utilize User Defined Controls in Commander to control an SPE amplifier driven by a Flex 3000?
Can I utilize User Defined Controls in Commander to control an SPE amplifier driven by a Flex 3000 run by PowerSDR software? The SPE amp is on COM17.
I want to be able to change from Antenna 1 to Antenna 2 on the SPE amplifier. I already have a Kenwood receiver tracking with the main radio as the Secondary. Also, in a Multi radio setting I have a yaesu FTDX101D set as radio #2.
?
The SPE command set is 0x04????
|
Thanks, Tom.? I'll give that a try.
(I was bogged down in teh command references trying to figure out how comments and info fields compare.)
7 3 Earl / KD5XB
On Monday, May 26th, 2025 at 3:32 PM, TOM-KQ5S via groups.io <kq5stom@...> wrote:
According to Perplexity:
DXSpider Command to Reject Spots with ¡°pse¡± in Comments To reject DX spots containing the word ¡°pse¡± in the comments (the information section) on a DXSpider node, you use a reject filter targeting the spot¡¯s info field. The correct command is:
reject/spots info pse
On May 26, 2025, at 16:21, Earl Needham via groups.io <kd5xb@...> wrote:
On Monday, May 26th, 2025 at 3:02 PM, Joe Subich, W4TV <lists@...> wrote: It is most effective to filter spots of that ilk directly on
the cluster but the filter commands vary depending on which
of the three major cluster software packages is being used.
Do you already have the command built for DXSpider? Thanks, Earl / KD5XB Sent with Proton Mail secure email.
--
Tom-KQ5S
|
According to Perplexity:
DXSpider Command to Reject Spots with ¡°pse¡± in Comments To reject DX spots containing the word ¡°pse¡± in the comments (the information section) on a DXSpider node, you use a reject filter targeting the spot¡¯s info field. The correct command is:
reject/spots info pse
toggle quoted message
Show quoted text
On May 26, 2025, at 16:21, Earl Needham via groups.io <kd5xb@...> wrote:
On Monday, May 26th, 2025 at 3:02 PM, Joe Subich, W4TV <lists@...> wrote: It is most effective to filter spots of that ilk directly on
the cluster but the filter commands vary depending on which
of the three major cluster software packages is being used.
Do you already have the command built for DXSpider? Thanks, Earl / KD5XB Sent with Proton Mail secure email.
|
On Monday, May 26th, 2025 at 3:02 PM, Joe Subich, W4TV <lists@...> wrote: It is most effective to filter spots of that ilk directly on
the cluster but the filter commands vary depending on which
of the three major cluster software packages is being used. Do you already have the command built for DXSpider? Thanks, Earl / KD5XB Sent with Proton Mail secure email.
|
It is most effective to filter spots of that ilk directly on
the cluster but the filter commands vary depending on which
of the three major cluster software packages is being used.
However, it can be done in SpotCollector using the SQL filter
capability. In general one would want to add:
"and not notes like '*pse*'"
to any other SQL filter in use. If you are not using an SQL
filter, create a pair like:
<standardfilter> and (not notes like '*pse*')
<standardfilter> and <needfilter> and (not notes like '*pse*')
The first duplicates SpotCollector's normal ('X') filtering with
the added exclusion of the "begging" spots"
The second duplicates SpotCollector's normal "Need" filter with
the added exclusion of the "begging spots"
For maximum effectiveness you will probably need to discontinue
use of IRC or prefilter/discard DXSummit Spots since the DX Summit
feed is full of non-amateur "callsigns" wiht all manner of "junk"
like the "begging spots" (and worse).
Details on SpotCollector filters can be found in
.../DXLab/SpotCollector/Help/SpotDatabase.htm#Filtering with SQL Expressions
73,
... Joe, W4TV
toggle quoted message
Show quoted text
On 2025-05-26 4:25 PM, Earl Needham via groups.io wrote: Is there some way of filtering out (from Spot Collector) the so-called spots begging a DX station something like "15m pse"? I really don't need to have this pop up in Spot Collector and try to find him, just to find out it's someone BEGGING the DX to go to 15 meters on a medium most DX stations don't see anyway.
Thanks,
Earl / KD5XB
DM84
e e
Sent with [Proton Mail]() secure email.
|
Is there some way of filtering out (from Spot Collector) the so-called spots begging a DX station something like "15m pse"?? I really don't need to have this pop up in Spot Collector and try to find him, just to find out it's someone BEGGING the DX to go to 15 meters on a medium most DX stations don't see anyway.
Thanks, Earl / KD5XB DM84
e e
|
Re: Upload QSO to Club Log timed out
It's a transient connection issue. I've seen it on and off
over the last weekend.
73,
... Joe, W4TV
toggle quoted message
Show quoted text
On 2025-05-26 12:07 PM, Dave AA6YQ wrote: + AA6YQ comments below
For the past day or so I have been seeing this message when logging via the Capture window.
"Upload QSO to Club Log timed out"
My Clublog account works, I can log in to their website and see my data.
If I right-click from the log QSO's tab and choose upload to ClubLog I get the same error message.
If I wait for the upload to time out I can go to the QSL Tab, select ClubLog and click the Upload to ClubLog button and get the message "succeeded: 23 QSOs uploaded."
So, DXKeeper seems to be communicating with ClubLog for bulk uploads via the QSL tab but not via the Capture window on Log QSO's tab for single uploads.
No error log in menu bar.
+ I just tried a single-QSO upload to Clublog here and it worked correctly. Please try again.
73,
Dave, AA6YQ
|
Re: Upload QSO to Club Log timed out
+ AA6YQ comments below
For the past day or so I have been seeing this message when logging via the Capture window.
"Upload QSO to Club Log timed out"
My Clublog account works, I can log in to their website and see my data.
If I right-click from the log QSO's tab and choose upload to ClubLog I get the same error message.
If I wait for the upload to time out I can go to the QSL Tab, select ClubLog and click the Upload to ClubLog button and get the message "succeeded: 23 QSOs uploaded."
So, DXKeeper seems to be communicating with ClubLog for bulk uploads via the QSL tab but not via the Capture window on Log QSO's tab for single uploads.
No error log in menu bar.
+ I just tried a single-QSO upload to Clublog here and it worked correctly. Please try again.
73,
Dave, AA6YQ
|
Re: Upload QSO to Club Log timed out
I did a complete upload of all qso's to club log, now all is good.? dxkeepper is auto uploading to clublog now
?
Joe- K4JKB
?
|
Upload QSO to Club Log timed out
For the past day or so I have been seeing this message when logging via the Capture window.?? "Upload QSO to Club Log timed out"
My Clublog account works, I can log in to their website and see my data. If I right-click from the log QSO's tab and choose upload to ClubLog I get the same error message.
If I wait for the upload to time out I can go to the QSL Tab, select ClubLog and click the Upload to ClubLog button and get the message "succeeded: 23 QSOs uploaded."
So, DXKeeper seems to be communicating with ClubLog for bulk uploads via the QSL tab but not via the Capture window on Log QSO's tab for single uploads.
No error log in menu bar.
|
Upload QSO to Club Log timed out
Hello,
?
a couple of days ago I noticed uploading to Club Log timed out.? This started with QSO's from 5/25/2025.? I am using DXKeeper latest version 18.1.4.
?
Below is information from the error log when attempted to upload a QSO to club log.? Any thoughts? LOTW auto upload is working as expected
?
?
thanks? K4JKB
?
2025-05-26 10:26:35.817 > ClubLogModule.SendQSO: begin
2025-05-26 10:26:35.823 > ClubLogModule.SendQSO: initiating upload to https://clublog.org/realtime.php
2025-05-26 10:26:35.830 > ? ?Params = False
2025-05-26 10:26:35.837 > ClubLogModule.SendQSO: upload initiated
2025-05-26 10:26:35.845 > ClubLogModule.HandleInetStateChange, theState = 3(Connecting), OperationCompleted = False
2025-05-26 10:26:35.851 > ClubLogModule.HandleInetStateChange: connecting to Club Log host
2025-05-26 10:26:35.916 > ClubLogModule.HandleInetStateChange, theState = 4(Connected), OperationCompleted = False
2025-05-26 10:26:35.924 > ClubLogModule.HandleInetStateChange: connected to Club Log host
2025-05-26 10:26:36.003 > ClubLogModule.HandleInetStateChange, theState = 5(Requesting), OperationCompleted = False
2025-05-26 10:26:36.013 > ClubLogModule.HandleInetStateChange: sending request to Club Log
2025-05-26 10:26:36.020 > ClubLogModule.HandleInetStateChange, theState = 6(Request Sent), OperationCompleted = False
2025-05-26 10:26:36.026 > ClubLogModule.HandleInetStateChange: successfully sent request to Club Log
2025-05-26 10:26:36.034 > ClubLogModule.HandleInetStateChange, theState = 7(Receiving Response), OperationCompleted = False
2025-05-26 10:26:36.041 > ClubLogModule.HandleInetStateChange: receiving response from Club Log
2025-05-26 10:26:36.088 > ClubLogModule.HandleInetStateChange, theState = 8(Response Received), OperationCompleted = False
2025-05-26 10:26:36.096 > ClubLogModule.HandleInetStateChange icResponseReceived: still executing
2025-05-26 10:26:36.103 > ClubLogModule.HandleInetStateChange: received response from Club Log
2025-05-26 10:26:36.111 > ClubLogModule.HandleInetStateChange, theState = 12(Response Completed), OperationCompleted = False
2025-05-26 10:26:36.118 > ClubLogModule.HandleInetStateChange: response completed?
2025-05-26 10:26:36.495 > DXLogMain.LogGrid_FetchCellTips, RowIndex = 8, ColIndex = 0, DXLogSetup.TooltipsCheckbox.Value = 1
2025-05-26 10:26:36.504 > ? ?theColName = BAND
2025-05-26 10:26:36.510 > ? ?Callsign = KC3OL, CellContents = 20M
2025-05-26 10:26:36.516 > DXLogMain.LogGrid_FetchCellTips complete, CellTip = +celltip
2025-05-26 10:26:36.855 > DXLogMain.LogGrid_FetchCellTips, RowIndex = 8, ColIndex = 0, DXLogSetup.TooltipsCheckbox.Value = 1
2025-05-26 10:26:36.863 > ? ?theColName = BAND
2025-05-26 10:26:36.871 > ? ?Callsign = KC3OL, CellContents = 20M
2025-05-26 10:26:36.877 > DXLogMain.LogGrid_FetchCellTips complete, CellTip = +celltip
2025-05-26 10:26:38.445 > DXLogMain.LogGrid_FetchCellTips, RowIndex = 8, ColIndex = 0, DXLogSetup.TooltipsCheckbox.Value = 1
2025-05-26 10:26:38.455 > ? ?theColName = BAND
2025-05-26 10:26:38.461 > ? ?Callsign = KC3OL, CellContents = 20M
2025-05-26 10:26:38.467 > DXLogMain.LogGrid_FetchCellTips complete, CellTip = +celltip
2025-05-26 10:26:39.261 > DXLogMain.LogGrid_FetchCellTips, RowIndex = 2, ColIndex = 19, DXLogSetup.TooltipsCheckbox.Value = 1
2025-05-26 10:26:39.269 > ? ?theColName = QSO_BEGIN
2025-05-26 10:26:39.277 > ? ?Callsign = CO8ZZ, CellContents = 5/23/2025 ? 01:11
2025-05-26 10:26:39.283 > DXLogMain.LogGrid_FetchCellTips complete, CellTip = +celltip
2025-05-26 10:27:36.099 > ClubLogModule.DownloadTimedOut
2025-05-26 10:27:36.110 > ClubLogModule.SendQSO: upload aborted after 4connection retries
2025-05-26 10:27:36.118 > Message.DisplayMessage: Title: DXKeeper Club Log Upload, Message = Upload QSO to Club Log timed out
2025-05-26 10:27:36.144 > DXLogMain.popClubLogUpload_Click: complete
2025-05-26 10:27:36.154 > DXLogMain.LogGrid_Click, ClickCallsign = KF8CGR, ClickAbsolute = 63987
2025-05-26 10:27:36.161 > DXLogMain.LogGrid_Click: complete
2025-05-26 10:27:36.396 > DXLogMain.RowChangeLookupTimer_Timer
2025-05-26 10:27:36.405 > DXLogModule.UpdateFieldVisibility, DXCCID = 291
2025-05-26 10:27:36.413 > DXLogModule.UpdateFieldVisibility: unneeded
2025-05-26 10:27:36.421 > DXLogMain.ValidFields: KF8CGR
2025-05-26 10:27:36.429 > DXLogMain.ValidFields: complete
2025-05-26 10:27:36.437 > DXLogModule.UpdateProgressDisplays
2025-05-26 10:27:36.445 > DXLogModule.UpdateDetailGrid
2025-05-26 10:27:36.453 > DXLogModule.UpdateDetailGrid: K
2025-05-26 10:27:36.461 > StatusString.UpdateGrid
2025-05-26 10:27:36.468 > StatusString.UpdateGrid complete
2025-05-26 10:27:36.475 > DXLogModule.UpdateDetailGrid: complete
2025-05-26 10:27:36.483 > WAZModule.UpdateWAZDetailGrid
2025-05-26 10:27:36.490 > WAZModule.UpdateWAZDetailGrid: CQ Zone 4
2025-05-26 10:27:36.498 > WAZModule.UpdateWAZDetailGrid: complete
2025-05-26 10:27:36.506 > DXLogMain.RowChangeLookup (not suppressed) KF8CGR
2025-05-26 10:27:36.513 > DDEClientModule.PrefixLookup, theCallsign = KF8CGR, theDXCCPrefix = K
2025-05-26 10:27:36.519 > DDEClientModule.PrefixLookup via DXView PrefixLookupCommand
2025-05-26 10:27:36.546 > DDEClientModule.PrefixLookup, LotW = Y, eQSL = N
2025-05-26 10:27:36.554 > DDEClientModule.UpdateLatLon: 43 30' N, 85 0' W
2025-05-26 10:27:36.562 > DXLogMain.RowChangeLookupTimer_Timer: enabling CallbookCmd
2025-05-26 10:27:36.569 > DXLogMain.RowChangeLookupTimer_Timer: complete
|
Hi Rick
?
Many thanks for this.
The path was wrong. Corected and now all seems ok.
?
Thanks again,
Roger
EI8KN.
?
|
Re: support for new radio
+ AA6YQ comments below
Might I suggest that one of you give Yaesu a call or send an email. The couple of times I've had issues with my FT-891 they've always been helpful on the phone
+ Based on my experience with Yaesu over the past 24 years, I'll pass on that suggestion. When a CAT instruction set manual is publically available, I'll review it.
73,
Dave, AA6YQ
|
Re: support for new radio
Might I suggest that one of you give Yaesu a call or send an email. The couple of times I've had issues with my FT-891 they've always been helpful on the phone?
?
--
John P.
WA2FZW
|
Chuck, WS1L
John P