开云体育

Chuck I forgot to mention, when I import the adi file from my logger into DXK, I make sure to check the box for "Substitute for missing myQTH IDs" and choose the correct my QTH ID I made for that

There are several apps you can use to find the county. Where am I? - is available for both android an iphones County Lines? - is available for iphone, not sure about android. I know there is also a

Chuck No, I don't use the KX3 or KX2 with DXLabs. Thanks 73 Kent N6WT [email protected]> wrote:

Thanks, Kent - exactly what I was looking for. I see the "Rig" field shows "KX3". Did you have to create a KX3 entry in Commander's Multi-Rig to append to the MyQTH ID? I'd rather avoid that route for

Here is a link to a couple of screenshots of my DXKeeper my QTHs and my TQSL Station location tab. The hardest part of this process is figuring out what county the location was in for TQSL.

Okay, looking back at the original post, I did not answer the question. I have a separate MYQTH ID for each place I activate. The only things that I enter is the correct CQ and ITU zone and the

Chuck I do all my SOTA and POTA logging on my phone. I use Ham2K Portable Logger. It is a very useful tool. After the activation, it produces an ADI file that I import directly into DXKeeper and

+ AA6YQ comments below + Before importing a log of QSOs from your just-completed POTA activation, 1. define a new myQTH in your Main log; populate the Sig textbox with the activated park code, and

Hi Chuck. https://docs.pota.app/ is the best place to get started. You can find all the details there. I have really gotten into POTA over the last few years. I use N1MM+ in the field. There are a

+ AA6YQ comments below + You have that capability now: u ncheck the "Frequency-dependent Settings" panels Enable box. + That's the purpose of the interoperation with Commander: to provide automatic

The local radio club is starting to get POTA active, and I am going to give it a try. I own a few small rigs suitable for very lightweight work, including a small 40M monobander and a KX1. I would

Thanks a lot, Dave! I have disabled the frequency dependent settings and PV is working as expected. Please consider, however, to take away the coupling of the program to Commander. As the prediction

+ AA6YQ comments below + The DXCC database specifies the UTC offset for Mali as 0. + The definition of an Override's TimeZone field is " the UTC offset for location from which the station is

1) Close DXKeeper and SpotCollector 2) Open DXView and click the DXCC button 3) Scroll down the list to ZS8 4) replace 0 in the Time Zone box with -2 5) Click "Save" 6) Click "reTable" 7) Close the

oddly when i entered +2 in the override it showed UTC-2 in the TZ in DXView. Changing it to -2 shows UTC+2 now. ?? jim ab3cv

DXLabsuite.com seems to be functioning here (No. Ca). I downloaded the DXView updates and launched the DXLabSuites page from Launcher just a few minutes ago. Rich, NU6T

nevermind, found it in one of the override columns i had never noticed before. jim

DXView shows UTC for ZS8 and it should be UTC+2. How do I edit the TZ shown? Jim ab3cv

Launcher is still showing "can't access dxlabsuite.com", as of 22:49z Monday May 5th It isn't causing me any headaches, because I can wait for an LOTW and eQSL updates, no biggie. All other sites

Try bypassing your ISP by using a VPN, de Laurie VK3AMA