DXLab@groups.io | Messages

Re: Change QSL Sent to "N" Bob Main All Messages By This Member #228645 Well the fact that I had 2024 in the QSO_End doesn't help. Sorry about that. toggle quoted message Show quoted text -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Bob Main via groups.io Sent: Wednesday, April 2, 2025 2:43 PM To: [email protected] Subject: Re: [DXLab] Change QSL Sent to "N" I tried the statement you have below and it didn't like it, so I changed it to: QSO_Begin #2025-04-02 1300# AND QSO_End #2024-04-02 1400# It didn't like that either. I'll do some digging later and see if I can figure out what's wrong. I'm sure it is something simple. 73, Bob KB4CL -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Joe Subich, W4TV Sent: Wednesday, April 2, 2025 11:46 AM To: [email protected] Subject: Re: [DXLab] Change QSL Sent to "N" On 2025-04-02 10:49 AM, Bob Main via groups.io wrote: Thanks Joe, no not using contest mode. It is the CWT contests that last an hour four times on Wednesdays. For example, this morning from 1300Z to 1400Z. QSO_Begin between #2025-04-02 13:00# and #2025-04-02 14:00# should do the job for the first hour this morning. That becomes QSO_Begin between #2025-04-02 19:00# and #2025-04-02 20:00# for this afternoon's run, etc. Given the amount of changing (four times a week) and short duration, it would probably be just as easy to use the UTC filter in DXK Advanced Sorts, Filters & Modifiers. Select the After radio button, enter the same data as in the two examples above, and click "Filter" at the right end of the panel. You will be in the Advanced Sorts, Filters and Modifiers window to change QSL_Sent to 'N' anyway. 73, ... Joe, W4TV On 2025-04-02 10:49 AM, Bob Main via groups.io wrote: Thanks Joe, no not using contest mode. It is the CWT contests that last an hour four times on Wednesdays. For example, this morning from 1300Z to 1400Z. There aren't that many, but if I can filter them out then I can change it. Then in the future I just modify the filter to fit the date and time frame. 73, Bob KB4CL -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Joe Subich, W4TV Sent: Wednesday, April 2, 2025 10:44 AM To: [email protected] Subject: Re: [DXLab] Change QSL Sent to "N" If you were using Contest mode, you could filter on CONTEST_ID. If you were not using contest mode, you would probably need to use a date filter QSO_Begin between #2025-01-01 16:00# and #2025-01-02 24:00# (use the appropriate date and times). For a date filter you can also use the UTC Filter in Advanced Sorts, Filters & Modifiers 73, ... Joe, W4TV On 2025-04-02 10:33 AM, Bob Main via groups.io wrote: If I work a number of stations during a contest, but I don't plan to mail out QSL cards to everybody I worked and I want to change QSL Sent to "N" in one move how do I do it? I know that I go into the DXKeeper Advanced Sorts, Filters & Modifiers. Then create a Filter to isolate them. Finally, under "Modify QSOs in Log Play Display I set QSL_Sent to "N". The question is what would the filter look like? 73, Bob KB4CL
Re: Change QSL Sent to "N" Bob Main All Messages By This Member #228644 I tried the statement you have below and it didn't like it, so I changed it to: QSO_Begin #2025-04-02 1300# AND QSO_End #2024-04-02 1400# It didn't like that either. I'll do some digging later and see if I can figure out what's wrong. I'm sure it is something simple. 73, Bob KB4CL toggle quoted message Show quoted text -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Joe Subich, W4TV Sent: Wednesday, April 2, 2025 11:46 AM To: [email protected] Subject: Re: [DXLab] Change QSL Sent to "N" On 2025-04-02 10:49 AM, Bob Main via groups.io wrote: Thanks Joe, no not using contest mode. It is the CWT contests that last an hour four times on Wednesdays. For example, this morning from 1300Z to 1400Z. QSO_Begin between #2025-04-02 13:00# and #2025-04-02 14:00# should do the job for the first hour this morning. That becomes QSO_Begin between #2025-04-02 19:00# and #2025-04-02 20:00# for this afternoon's run, etc. Given the amount of changing (four times a week) and short duration, it would probably be just as easy to use the UTC filter in DXK Advanced Sorts, Filters & Modifiers. Select the After radio button, enter the same data as in the two examples above, and click "Filter" at the right end of the panel. You will be in the Advanced Sorts, Filters and Modifiers window to change QSL_Sent to 'N' anyway. 73, ... Joe, W4TV On 2025-04-02 10:49 AM, Bob Main via groups.io wrote: Thanks Joe, no not using contest mode. It is the CWT contests that last an hour four times on Wednesdays. For example, this morning from 1300Z to 1400Z. There aren't that many, but if I can filter them out then I can change it. Then in the future I just modify the filter to fit the date and time frame. 73, Bob KB4CL -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Joe Subich, W4TV Sent: Wednesday, April 2, 2025 10:44 AM To: [email protected] Subject: Re: [DXLab] Change QSL Sent to "N" If you were using Contest mode, you could filter on CONTEST_ID. If you were not using contest mode, you would probably need to use a date filter QSO_Begin between #2025-01-01 16:00# and #2025-01-02 24:00# (use the appropriate date and times). For a date filter you can also use the UTC Filter in Advanced Sorts, Filters & Modifiers 73, ... Joe, W4TV On 2025-04-02 10:33 AM, Bob Main via groups.io wrote: If I work a number of stations during a contest, but I don't plan to mail out QSL cards to everybody I worked and I want to change QSL Sent to "N" in one move how do I do it? I know that I go into the DXKeeper Advanced Sorts, Filters & Modifiers. Then create a Filter to isolate them. Finally, under "Modify QSOs in Log Play Display I set QSL_Sent to "N". The question is what would the filter look like? 73, Bob KB4CL
Re: DX Marathon Year Dave AA6YQ All Messages By This Member #228643 + AA6YQ comments below If I depress Alt, what does that do? "To verify the entry for each CQ country by performing a??and to verify the entry for each CQ zone by performing a??(and if that fails, a??lookup), depress the?ALT?key while clicking the?Progress?button.?Depressing the?SHIFT?key while clicking the?Progress?button will verify only entries not confirmed via QSL card,??,??member of?,?, or??for each CQ country and each CQ zone" ? ? ?73, ? ? ? ? ? ?Dave, AA6YQ
Re: DX Marathon Year Kent N6WT All Messages By This Member #228642 If I depress Alt, what does that do? Thanks 73 Kent N6WT toggle quoted message Show quoted text On Tue, Apr 1, 2025 at 6:57?AM Dave AA6YQ via <aa6yq=[email protected]> wrote: + AA6YQ comments below Disregard. I see it is Ctrl. However, the help popup says at the end "Depress Alt to" and that is it. + Windows imposes a limit on the length of explanatory popups. I'll see if I can compress the explanation... ? ? ? ? ?73, ? ? ? ? ? ? ? ?Dave, AA6YQ
Re: Change QSL Sent to "N" Bob Main All Messages By This Member #228641 Thanks Joe, I'll give it a try. 73, Bob KB4CL toggle quoted message Show quoted text -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Joe Subich, W4TV Sent: Wednesday, April 2, 2025 11:46 AM To: [email protected] Subject: Re: [DXLab] Change QSL Sent to "N" On 2025-04-02 10:49 AM, Bob Main via groups.io wrote: Thanks Joe, no not using contest mode. It is the CWT contests that last an hour four times on Wednesdays. For example, this morning from 1300Z to 1400Z. QSO_Begin between #2025-04-02 13:00# and #2025-04-02 14:00# should do the job for the first hour this morning. That becomes QSO_Begin between #2025-04-02 19:00# and #2025-04-02 20:00# for this afternoon's run, etc. Given the amount of changing (four times a week) and short duration, it would probably be just as easy to use the UTC filter in DXK Advanced Sorts, Filters & Modifiers. Select the After radio button, enter the same data as in the two examples above, and click "Filter" at the right end of the panel. You will be in the Advanced Sorts, Filters and Modifiers window to change QSL_Sent to 'N' anyway. 73, ... Joe, W4TV On 2025-04-02 10:49 AM, Bob Main via groups.io wrote: Thanks Joe, no not using contest mode. It is the CWT contests that last an hour four times on Wednesdays. For example, this morning from 1300Z to 1400Z. There aren't that many, but if I can filter them out then I can change it. Then in the future I just modify the filter to fit the date and time frame. 73, Bob KB4CL -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Joe Subich, W4TV Sent: Wednesday, April 2, 2025 10:44 AM To: [email protected] Subject: Re: [DXLab] Change QSL Sent to "N" If you were using Contest mode, you could filter on CONTEST_ID. If you were not using contest mode, you would probably need to use a date filter QSO_Begin between #2025-01-01 16:00# and #2025-01-02 24:00# (use the appropriate date and times). For a date filter you can also use the UTC Filter in Advanced Sorts, Filters & Modifiers 73, ... Joe, W4TV On 2025-04-02 10:33 AM, Bob Main via groups.io wrote: If I work a number of stations during a contest, but I don't plan to mail out QSL cards to everybody I worked and I want to change QSL Sent to "N" in one move how do I do it? I know that I go into the DXKeeper Advanced Sorts, Filters & Modifiers. Then create a Filter to isolate them. Finally, under "Modify QSOs in Log Play Display I set QSL_Sent to "N". The question is what would the filter look like? 73, Bob KB4CL
Re: Change QSL Sent to "N" Joe Subich, W4TV All Messages By This Member #228640 On 2025-04-02 10:49 AM, Bob Main via groups.io wrote: Thanks Joe, no not using contest mode. It is the CWT contests that last an hour four times on Wednesdays. For example, this morning from 1300Z to 1400Z. QSO_Begin between #2025-04-02 13:00# and #2025-04-02 14:00# should do the job for the first hour this morning. That becomes QSO_Begin between #2025-04-02 19:00# and #2025-04-02 20:00# for this afternoon's run, etc. Given the amount of changing (four times a week) and short duration, it would probably be just as easy to use the UTC filter in DXK Advanced Sorts, Filters & Modifiers. Select the After radio button, enter the same data as in the two examples above, and click "Filter" at the right end of the panel. You will be in the Advanced Sorts, Filters and Modifiers window to change QSL_Sent to 'N' anyway. 73, ... Joe, W4TV On 2025-04-02 10:49 AM, Bob Main via groups.io wrote: Thanks Joe, no not using contest mode. It is the CWT contests that last an hour four times on Wednesdays. For example, this morning from 1300Z to 1400Z. There aren't that many, but if I can filter them out then I can change it. Then in the future I just modify the filter to fit the date and time frame. 73, Bob KB4CL -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Joe Subich, W4TV Sent: Wednesday, April 2, 2025 10:44 AM To: [email protected] Subject: Re: [DXLab] Change QSL Sent to "N" If you were using Contest mode, you could filter on CONTEST_ID. If you were not using contest mode, you would probably need to use a date filter QSO_Begin between #2025-01-01 16:00# and #2025-01-02 24:00# (use the appropriate date and times). For a date filter you can also use the UTC Filter in Advanced Sorts, Filters & Modifiers 73, ... Joe, W4TV On 2025-04-02 10:33 AM, Bob Main via groups.io wrote: If I work a number of stations during a contest, but I don't plan to mail out QSL cards to everybody I worked and I want to change QSL Sent to "N" in one move how do I do it? I know that I go into the DXKeeper Advanced Sorts, Filters & Modifiers. Then create a Filter to isolate them. Finally, under "Modify QSOs in Log Play Display I set QSL_Sent to "N". The question is what would the filter look like? 73, Bob KB4CL
Re: AT&T ending email to text on June18 Jim Miller - AB3CV All Messages By This Member #228639 Edited I use the method of sending email to my phone.number@.... (txt.att.net) The delay time to receive these is highly variable and up to 24hrs late. ? Not sure if that answers your question. ? Email to my Gmail address arrives via ATT if I'm not on WIFI and seems to be delivered promptly. And delivery by WIFI is prompt as well. ? Thanks ? jim ab3cv
Re: Change QSL Sent to "N" Bob Main All Messages By This Member #228638 Thanks Joe, no not using contest mode. It is the CWT contests that last an hour four times on Wednesdays. For example, this morning from 1300Z to 1400Z. There aren't that many, but if I can filter them out then I can change it. Then in the future I just modify the filter to fit the date and time frame. 73, Bob KB4CL toggle quoted message Show quoted text -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Joe Subich, W4TV Sent: Wednesday, April 2, 2025 10:44 AM To: [email protected] Subject: Re: [DXLab] Change QSL Sent to "N" If you were using Contest mode, you could filter on CONTEST_ID. If you were not using contest mode, you would probably need to use a date filter QSO_Begin between #2025-01-01 16:00# and #2025-01-02 24:00# (use the appropriate date and times). For a date filter you can also use the UTC Filter in Advanced Sorts, Filters & Modifiers 73, ... Joe, W4TV On 2025-04-02 10:33 AM, Bob Main via groups.io wrote: If I work a number of stations during a contest, but I don't plan to mail out QSL cards to everybody I worked and I want to change QSL Sent to "N" in one move how do I do it? I know that I go into the DXKeeper Advanced Sorts, Filters & Modifiers. Then create a Filter to isolate them. Finally, under "Modify QSOs in Log Play Display I set QSL_Sent to "N". The question is what would the filter look like? 73, Bob KB4CL
Re: Change QSL Sent to "N" Joe Subich, W4TV All Messages By This Member #228637 If you were using Contest mode, you could filter on CONTEST_ID. If you were not using contest mode, you would probably need to use a date filter QSO_Begin between #2025-01-01 16:00# and #2025-01-02 24:00# (use the appropriate date and times). For a date filter you can also use the UTC Filter in Advanced Sorts, Filters & Modifiers 73, ... Joe, W4TV toggle quoted message Show quoted text On 2025-04-02 10:33 AM, Bob Main via groups.io wrote: If I work a number of stations during a contest, but I don't plan to mail out QSL cards to everybody I worked and I want to change QSL Sent to "N" in one move how do I do it? I know that I go into the DXKeeper Advanced Sorts, Filters & Modifiers. Then create a Filter to isolate them. Finally, under "Modify QSOs in Log Play Display I set QSL_Sent to "N". The question is what would the filter look like? 73, Bob KB4CL
Re: copy profile Joe Subich, W4TV All Messages By This Member #228636 As best as I can recall, install a fresh copy of WSJTX on the new system then copy %LocalAppData%\WSJT-X from the system/install you want to move/clone to the same location on the new system. That will move a lot of "junk" but it will get the WSJT-X.ini, wsjtx_log.adi, wsjtx.log and any ALL files. 73, ... Joe, W4TV toggle quoted message Show quoted text On 2025-04-02 10:24 AM, scot via groups.io wrote: Joe, Thank you for the information. That is exactly what i need.? Now to do the same for wsjt. Scott N2SAB
Change QSL Sent to "N" Bob Main All Messages By This Member #228635 开云体育 If I work a number of stations during a contest, but I don’t plan to mail out QSL cards to everybody I worked and I want to change QSL Sent to “N” in one move how do I do it?? I know that I go into the DXKeeper Advanced Sorts, Filters & Modifiers.? Then create a Filter to isolate them.? Finally, under “Modify QSOs in Log Play Display I set QSL_Sent to “N”.? The question is what would the filter look like? ? 73, Bob KB4CL
Re: copy profile scot All Messages By This Member #228634 Joe,? ? Thank you for the information. That is exactly what i need.? Now to do the same for wsjt. ? Scott N2SAB
Re: AT&T ending email to text on June18 Joe Subich, W4TV All Messages By This Member #228633 <> shows Android, iPhone & iPad, Desktop (Browser based). Looks like the one-time license fee is now $4.99 per platform (Android, iPhone/iPad, Desktop) for up to 10 devices. They have a 30 day trial. 73, ... Joe, W4TV toggle quoted message Show quoted text On 2025-04-02 9:49 AM, Dean W8ZF wrote: Hi Jim, I had similar unreliable email to sms service from Tmobile, and then Gmail. I found an Android app called Pushover. It costed like, $2.99 for lifetime use. I got an address to send my emails, and it sends me an SMS. It is nearly instantaneous and works very well. Don't know if there's an iPhone version. 73 Dean W8ZF
Re: AT&T ending email to text on June18 Dean W8ZF All Messages By This Member #228632 Hi Jim, I had similar unreliable email to sms service from Tmobile, and then Gmail. I found an Android app called Pushover. It costed like, $2.99 for lifetime use. I got an address to send my emails, and it sends me an SMS. It is nearly instantaneous and works very well. Don't know if there's an iPhone version. 73? Dean W8ZF?
Re: copy profile Joe Subich, W4TV All Messages By This Member #228631 You can't simply copy an installation from one computer to another. However, if you follow the instructions here: <> you can reinstall on the new computer with all of your settings and intact. 73, ... Joe, W4TV toggle quoted message Show quoted text On 2025-04-02 7:55 AM, scot via groups.io wrote: Hello, I wanted to know if there is a way to copy a profile from 1 computer to another ? I had a crash and lost the laptop. I have a good working install on a desktop. Scott N2SAB
Re: copy profile TOM-KQ5S All Messages By This Member #228630 开云体育 Check out this.

Tom - KQ5S

Show quoted text

On Apr 2, 2025, at 06:55, scot via groups.io <n2sab@...> wrote:

Hello,

?

I wanted to know if there is a way to copy a profile from 1 computer to another ? I had a crash and lost the laptop. I have a good working install on a desktop.

?

Scott

N2SAB

Tom-KQ5S

开云体育

开云体育

开云体育