开云体育

Selecting a video card may be a bit of an oxymoron these days as the integrated video capabilities on many of the newer systems are more than adequate. For example, the integrated video in the Ryzen 7

+ AA6YQ comments below An important distinction is that most of the features of these performance graphics cards are not going to be used at all with typical ham applications. Almost nothing in the

An important distinction is that most of the features of these performance graphics cards are not going to be used at all with typical ham applications.? Almost nothing in the ham application use 3D

Henk, thank you. It is not yet clear to me that my system will handle 4K monitors. I need to learn more, but I read that Dell made several design choices in the XPS 8950 that may limit resolutions

Dave, thank you. Beautiful! Rich, NU6T [email protected]> wrote:

+ AA6YQ comments below It was the databases in DXView the caused the problem. + There was no "problem" - you simply forgot to copy or download the eQSL and LoTW databases to your new computer . There

+ AA6YQ comments below

+ AA6YQ comments below + Make sure Commander and your IC-7800 are set to the same baud rate. + You don't want "CI-V transceive" enabled, though enabling it would not prevent interaction + Contact Icom

2025-03-25 20:22:08.824 > RadioFreq + theAdjustment = -0.01 2025-03-25 20:22:08.824 > CIVModule.SetXcvrFreq: NewFreq = -0.01, theBand = -1, QSYBand = -1 2025-03-25 20:22:08.824 >

Still trying to get Commander up and running with the Icom 7800. Am using a straight through DB-9 cable. have set the 7800 ci-v to on, ci-v address to 6A in both commander and the 7800 but still

Thanks Dave. What started this is I was looking for a feature that the gateway did not provide so I discussed it with Dave and he asked if I wanted to take a look again at taking over maintenance. We

Thanks Dave It was the databases in DXView the caused the problem. -Kurt, KR2C

Hi to Dave and Stan, Like Stan, that process is OK, but I think I will stick to my "Sticky Notes" on screen, where I keep a list of new ones worked until they are confirmed. For the (now) two new ones

Hi, The Intel UHD 730 chipset supports 4k resolution. (Max 4096x2160@60Hz). Depending on the motherboard you might not need an additional graphics card. I use a 32 inch 4K monitor. Make sure it has

+ AA6YQ comments below + Understood. It's only appropriate if you don't want to wait for one DXCC award application to be processed by the ARRL's DXCC desk before generating the next one. 73, Dave,

+ AA6YQ comments below + I use a 32" HP Z32 display, whose resolution in 3840 x 2160, driven by an Nvidia GTX760. As you can see in this screenshot, it can simultaneously display SpotCollector's,

Hi Dave,

# AA6YQ comments below It would be handy if ADIF/Dave were to defined a 'P' (pending) status for those of us who prefer to manually prepare submissions as the confirmations arrive. # You can setup a

Hi Dave, Using these instructions? https://dxlabsuite.com/dxlabwiki/UserAwardProgressreports 73 Stan KM4HQE

+ AA6YQ comments below That's ticked, Any other suggestions? + Yes: click the Colors button in the same pane and confirm that the Log Page Display background colors are set correctly. + Also visit