开云体育

Hi Group, I finally bit the bullet and my new Flex 8400 should be here tomorrow. Is the documentation in TransceiverControlFlexradio - DX Lab Suite Wiki (

+ AA6YQ comments below + Thanks, Jeff! Did WinWarbler display RTTY text decoded by your K4 (as distinguished from RTTY text decoded by the MMTTY and 2Tone engines)? Dave

Dave, I am an infrequent user of WinWarbler, but I do have it set up.? I fired it up this morning, and it appears to function as it should with My K4, both TX and RX.? Not a lot of activity here at

...by setting the Model selector to "Xcvr Ctrl App" on the "External Modem" tab of WinWarbler's Configuration window? When so configured, WinWarbler transmits RTTY by directing Commander to send the

Thank you! I suspected it was spot filtering because I see 1000s of entries in the spot database. Turned out that somehow I cleared out the band checklist in the band filter dialog. Fixed that and

Try working through the items here: <http://www.dxlabsuite.com/dxlabwiki/EmptyDatabase> Most common - improperly configured filter: Control-Click on the X beside the filter text box to remove all

Sorry to add another non-specific "Spots don't display" question. But spots stopped displaying. Windows 11, Nvidia RTX3060i with Studio Driver 576.02, Spot Collector 9.8.3 Only spot source is N6WS and

What do you mean "single space"? If you mean the row height in Spot Database display is too large, got to Config -> Spot Database Display and click the "Set Row Height" button in the Font panel along

Can't seem to get it to single space.? Don't know what I did, but no success.

+ AA6YQ comments below Listing or Printing Needed Grids. Is there a way to generate needed grids? + There isn't. 73, Dave, AA6YQ

Listing or Printing Needed Grids. Is there a way to generate needed grids?? The progress report show worked grids.? It would be nice to have a sheet of needed grids printed out. Mike W0MU

+ AA6YQ comments below + DXLab provides real-time award tracking for the DXCC, IOTA, Marathon, VUCC, WAS, WAZ, and WPX awards on the bands and modes that you've specified for each of them. Active

SpotCollector will track your 6-meter grids. First set up in DXKeeper | Config | Awards tab | VUCC Bands & Modes, this will activate the search for VHF grids. Then configure your SpotCollector display

If multiple versions of JTAlert are exhibiting problems the cause will very likely be caused by something other than JTAlert. The most likely culprit is your protection software is interfering with

To be clear I had everything set up per the wiki and other pages and had been working perfectly for the last few years. Every parameter from

+ AA6YQ comments below + Step-by-step instructions are here: https://www.dxlabsuite.com/dxlabwiki/GettingStartedwithK1JTModesDirect + If you prefer JTAlert, install the latest version as Laurie VK3AMA

Peter, here is an additional guidance that I need to digest: https://www.dxlabsuite.com/dxlabwiki/GettingStartedwithK1JTModesDirect It seems to offer insight into various uses of "WSJTX to DXLab" when

You do not need JT Alert to log into DXKeeper. Check the documentation . You can have each QSO log directly to DXKeeper without JTALERT. There are 2 ways to operate with DXLABS. Outlook LT Gil W0MN

Here is the link: http://www.dxlabsuite.com/dxlabwiki/GettingStartedwithK1JTModesDirect Bruce McLain bruce.mclain@...

Hi Peter. I"m one of the novices here, grin. I have WSJTX reporting directly to the DXLab suite from the directions here: https://www.dxlabsuite.com/dxlabwiki/GettingStartedwithK1JTModes I'm not using