开云体育

Rodney, I am sure you cannot get anything from the manufacturer in the way specifications for spurious signals (harmonics, etc), but I imagine the FCC has specifications for allowable spurious signals

Did not work for me. The radio will take the frequencies and key up but there is no transmit on the spectrum analyzer and no receive. Thought I would give my results. Darrell, AF4E

I had the same problem with a UV5R with an external speaker/mic. The mic element is mounted flush on the internal PC board in the external speaker/mic. There's a round fixed-formed tube on the inside

Wondering if you found the answer why after loading in Digital Contacts, you don't see on the display the info you should be seeing, the call sign, qth, etc. I have a friend who just picked this radio

You can find them on Amazon, Ebay and other sites. [email protected]> wrote:

Looking for a charger for a BF-F8HP.. Mine stopped working.? Also as antenna for it.. Uses a SMA Femail antenna? dual band.. Thanks Skip

Found this on Google.... That's for charging a 3800mAh battery using the side jack.To charge the BL-5L 3800mAh battery you must purchase a:- TYT TH-UVF9 battery charger for 110VAC or- TYT TH-UVF9D for

I notice what appears to be a charge connector at the top right corner of the subject battery. Here are some questions. #1, is this a charge port? I found no charger/wall wart listed anywhere

I have a DM-1701 and an Anytone 878UV.?? On the Anytone there are two different areas, one for digital talk groups and another for digital contacts (DMR IDs) that can be displayed on a received

Paraic . . . wrote: If you can't fix it, replacements are cheap. $12 on Amazon, $11 on eBay. Donald KX8K ---------------------------------------------------- Some ham radio groups you may be

Thanks Johnny I checked, and it appears to be fine. I re-connected again, and it's still happening. I think I might chance taking dismantling it and see if I can see a short... 73 Paraic EI9IRB

This will TX also.? One day I got a page, didn't have my ambulance radio, and responded on the Baofeng.? I was a bad boy that time. ?Dave Springer, N0TXJ Get BlueMail for Android ?

Dave . . . <n0txj@...> wrote: These should be able to receive outside the ham bands, but not transmit. Older units could transmit outside our assigned bands. Donald KX8K

Hello check out the mic button some times mine gets stuck and doesn't click back into the off position. I had once like that and that's what happened.

I have a speaker mic connected to my UV9R. This is it: https://www.baofengradio.co.uk/original-baofeng-portable-speaker-mic-microphone-for-uv-9r-uv-9r-plus-a-58-9700-walkie-talkies/ It's been working

I have a UV5RHP that would not program out of ham band and I wanted to monitor the EMS and dispatch channels for my ambulance service.? I bought programming software and a cable.? I simply put in

Charlie . . . <w5cdt@...> wrote: I was under the impression that the company got in trouble with the FCC (they did), and they had to make changes to them so they couldn't transmit out

Phil . . . Aside from choosing the correct COM port in the CHIRP software, make sure the volume control is opened up enough for the data to get through. It gets programmed through that control. If you

Hi Maynard, Try activating the voice prompts when you are manually programming may be a bhelp I'm keeping track of where you are in the sequence. Bob VK2NRC wrote:

Evening Maynard, LOL &mdash; either we have a failure to communicate or our RF is in different dimensions. I am stupified my step-by-step instructions worked, and with only one save As you've seen,