开云体育

You might wish to choose the "Chat with us" button lower-right at https://baofengradio.co.uk/baofeng-uv-5rh-10w-multi-band-tri-band-2500mah-vhf-uhf-long-range-walkie-talkie-two-way-radio/ and see if

check this software, Baofeng UV-5RH, I-Black (T6UV v1.1.8)

Thanks Donald, I must say, I'm not sure I had the volume up all the way each time I tested it with Chirp so I may try the tests again, but I did try setting it for BF-F8HP and it just comes back with

Peter . . . Did you check the supported radios list for CHIRP? I don't see a UV-5RH but I do see this one, and it says to use a different model when selecting the radio in CHIRP: UV-5RHP (use BF-F8HP)

Hi Everyone, Thanks for letting me join. I already have a number of UV-5R's but I have just purchased a UV-5RH. I expected it to be very similar to the 5R, but it has several different options in the

Sorry, not that good of deal anyway...........73

Ummm. Ray. Nobody else can access your Inbox or messages there. Please instead share the link from the message you intended. 73 Danny, K5CG HH 550-000-0609 SKCC 14257 To: [email protected] Sent:

Want to let the list know, UV-5R sale!!.....I have ordered from here before. https://mail.google.com/mail/u/0/#inbox/WhctKKZGhMLdWTcnSGrGFNzsMWQnCPCgblFTJWdslRZlTtcwWPlTxdlxFnpQkgsdXGCKvwB wrote:

I have had success with other such problems by flooding the power switch with a solvent such as CRC QD (quick dry) Electronics Cleaner, repeatedly working the switch before the solvent dries, and then

Donald, Thank you for the suggestions.? Yes the battery cannot be installed wrong since it only fits one way.? I did clean the contacts and still nothing. I am suspecting the Power switch as it has

Anthony . . . groups.io" <gannon.anthony@...> wrote: You did the one thing the Baofeng troubleshooting guide said to do, other than making sure that the battery is installed correctly,

I have the Baofeng DM-1701 and it is about two years old.? Went on vacation and three weeks later went to turn on the radio and it did not turn on.? Figured the battery was dead but after charging

Good work, Steve! That's good information. 73!

I uploaded two documents, one in MS Word format, the other as a PDF. They are both titled: How to reset a Baofeng UV-5R I thought this might be something users of this radio might want to keep a local

I got it to work with TDR set to ON and TDR-AB set to A (my transmit frequency). The other requirement was to have SQUELCH set at least to 1. Steve AI9IN

Not sure if Menu Item #34 - TDR-AB would affect the dual watch feature. I found a discussion regarding TDR-AB that indicates it simply locks in one specific frequency or channel for transmission,

Checking the obvious here, but does your display indicate "S" when TDR is ON? [MENU] 007, [MENU], scroll to ON, [MENU], [EXIT] The display now shows the letter "S" to the left of the display. This

### Reset all settings - [MENU] 040, [MENU] - Voice prompt confirms, "Initialization." - Scroll up or down to ALL, press [MENU] to confirm - The display asks, "Source?" - Scroll up or down to ALL,

Steve . . . wrote: I have one myself but I've never reset it. Apparently, there are various things you can reset on the UV-5R. Try these instructions:

Check menu 34: TDR--AB should be OFF . I've never operated with that on before , but it sounds like it might be the nature of your beast [email protected]> wrote: