¿ªÔÆÌåÓý

  1. 7x12MiniLathe
  2. Topics

Links Inactive

 


I am unable to click and open links on this group.
I belong to several other groups and have no problem.
Is this feature non functional in this group?

Dick
?OFF-SET TAILSTOCK CENTER PLANS

?SMALL TURRET TOOL POST PLANS?
?LARGE TURRET TOOL POST PLANS
?MINI-LATHE CARRIAGE LOCK PLANS
?SMALL QC TOOL POST PLANS?
?QUICK CHANGE LATHE TURRET
?MINI LATHE COMPOUND PIVOT MODIFICATION
 

you might have to log out and log in again

On Thu, Apr 14, 2022 at 7:53 AM OldToolmaker via <old_toolmaker=[email protected]> wrote:

I am unable to click and open links on this group.
I belong to several other groups and have no problem.
Is this feature non functional in this group?

Dick
?OFF-SET TAILSTOCK CENTER PLANS

?SMALL TURRET TOOL POST PLANS?
?LARGE TURRET TOOL POST PLANS
?MINI-LATHE CARRIAGE LOCK PLANS
?SMALL QC TOOL POST PLANS?
?QUICK CHANGE LATHE TURRET
?MINI LATHE COMPOUND PIVOT MODIFICATION


--
Buffalo John
 

On Thu, Apr 14, 2022 at 07:53 AM, OldToolmaker wrote:
Dick
?OFF-SET TAILSTOCK CENTER PLANS

?SMALL TURRET TOOL POST PLANS?
?LARGE TURRET TOOL POST PLANS
?MINI-LATHE CARRIAGE LOCK PLANS
?SMALL QC TOOL POST PLANS?
?QUICK CHANGE LATHE TURRET
?MINI LATHE COMPOUND PIVOT MODIFICATION
The guidelines for this group state:we don't allow advertising by vendors
 

¿ªÔÆÌåÓý

They¡¯ve always worked for me.?

Are you getting these posts via email or directly on the forum site? If so what mail client? There are a lot of variables that can come into play for an issue like this.

Yours and other's links are clickable in the emails I get.?

The one in the original post was somehow mangled and did not come across as a clickable link.



On Apr 14, 2022, at 7:53 AM, OldToolmaker via <old_toolmaker@...> wrote:


I am unable to click and open links on this group.
I belong to several other groups and have no problem.
Is this feature non functional in this group?

Dick
?OFF-SET TAILSTOCK CENTER PLANS

?SMALL TURRET TOOL POST PLANS?
?LARGE TURRET TOOL POST PLANS
?MINI-LATHE CARRIAGE LOCK PLANS
?SMALL QC TOOL POST PLANS?
?QUICK CHANGE LATHE TURRET
?MINI LATHE COMPOUND PIVOT MODIFICATION

--?
Bruce Johnson

"Wherever you go, there you are." B. Banzai, PhD

 

The links work for me, Dick.
ralphie
 

I am getting them directly from the forum as far as I am aware.
 

¿ªÔÆÌåÓý

That is strange; I think it¡¯s then something in whatever email client you¡¯re using.

If it¡¯s any web link in any email, it might be?possibly some obscure preference setting to disable web links. But if it¡¯s just this list I'm at a loss.


On Apr 15, 2022, at 1:47 PM, OldToolmaker via <old_toolmaker@...> wrote:

I am getting them directly from the forum as far as I am aware.

--?
Bruce Johnson

"Wherever you go, there you are." B. Banzai, PhD

 

Bruce,
The links work fine for me now!
Must have been a glitch.

1 - 8 of 8