开云体育

  1. 7x12MiniLathe
  2. Topics

Rotary table with dividing plates

 

Is anyone using a rotary table with dividing plates on the mini mill or mini lathe ? if so what size are you using ?? Thank you for any information ?
 

开云体育

Hi

What are you thinking about??

for me is a rotary table 2 main thing:

Home made of wood and this fancy heavy ?ones ?with a crank.? (on my next charismas whish list)

I can write a book about the wood ones and add 100 of pictures (ok, don’t believe my numbers) but I have used my home made dividing plates for a generation. (First for making clock wheels.)

But today I use a wood disk on the end of my lathe to drill holes into something I put into my chuck.

?

More info, send a picture.

?

/johannes

?

?

Sendt fr? for Windows

?

Fr?:Bruce Casey
Sendt: m?ndag 21. februar 2022 09:57
Til: [email protected]
Emne: [7x12MiniLathe] Rotary table with dividing plates

?

Is anyone using a rotary table with dividing plates on the mini mill or mini lathe ? if so what size are you using ?? Thank you for any information ?

?

552D06E28BA644B4A7149C68DF0B4936.png

 

I use a small shop built dividing attachment to fit my mini-lathe. The headstock is worm gear driven. This unit fits right onto the minilathe and can divide just about any number of divisions. ?You could make your own easily following Ted Hansens plans from Home Shop Machinist.
 

Could you share some pictures and info on your homemade one?

Mike Taglieri?



On Mon, Feb 21, 2022, 2:36 PM Johannes <johannes@...> wrote:

Hi

What are you thinking about??

for me is a rotary table 2 main thing:

Home made of wood and this fancy heavy ?ones ?with a crank.? (on my next charismas whish list)

I can write a book about the wood ones and add 100 of pictures (ok, don’t believe my numbers) but I have used my home made dividing plates for a generation. (First for making clock wheels.)

But today I use a wood disk on the end of my lathe to drill holes into something I put into my chuck.

?

More info, send a picture.

?

/johannes

?

?

Sendt fr? for Windows

?

Fr?:Bruce Casey
Sendt: m?ndag 21. februar 2022 09:57
Til: [email protected]
Emne: [7x12MiniLathe] Rotary table with dividing plates

?

Is anyone using a rotary table with dividing plates on the mini mill or mini lathe ? if so what size are you using ?? Thank you for any information ?

?
 

开云体育

??? ??? That sounds interesting , I for one would like to see your pictures Johannes .

??? thanks

??? animal

On 2/21/2022 11:35 AM, Johannes wrote:

Hi

What are you thinking about??

for me is a rotary table 2 main thing:

Home made of wood and this fancy heavy ?ones ?with a crank.? (on my next charismas whish list)

I can write a book about the wood ones and add 100 of pictures (ok, don’t believe my numbers) but I have used my home made dividing plates for a generation. (First for making clock wheels.)

But today I use a wood disk on the end of my lathe to drill holes into something I put into my chuck.

?

More info, send a picture.

?

/johannes

?

?

Sendt fr? for Windows

?

Fr?:Bruce Casey
Sendt: m?ndag 21. februar 2022 09:57
Til: [email protected]
Emne: [7x12MiniLathe] Rotary table with dividing plates

?

Is anyone using a rotary table with dividing plates on the mini mill or mini lathe ? if so what size are you using ?? Thank you for any information ?

?
 

开云体育

I did this one: ?

Really nice and easy to do.
 

开云体育

Hi Dean

This is what I want to my next Christmas,

What shall I do?

Start saving and get one from China ?

Start converting all numbers into metric (or maybe not?) ?and later have lot of fun?

I have most of the equipment to do the job.

Thanks for the link and pictures.

I will reread the pages again.

You say it was a easy job to do !

?

/johannes

?

?

?

Sendt fr? for Windows

?

Fr?:pigifly via groups.io
Sendt: tysdag 22. februar 2022 08:30
Til: [email protected]
Emne: Re: [7x12MiniLathe] Rotary table with dividing plates

?

I did this one: ?

Really nice and easy to do.

?

955C890C0B294CCE999EE3D03BA42CBB.png

1 - 7 of 7