开云体育

Hi John It is a plate about ?” thick (6 mm) the hole must be between ? and 5/16 in diameter. What is an EDM equipment? Gianni _____ Da: 7x12minilathe@...

Thank you Clifford Clavin. :) Marty, I just barely got through your post without hitting 'next'. I think I'll just wait for the last post on this subject that just says '________ is the best lube to

Hi Gianni, That stuff's hard. What diameter and how deep? Any access to EDM equipment? John http://www.email.it/f 5000 prodotti in pronta consegna, consegna in 24h, assistenza telefonica da tecnici

Hi folks Does anybody know how to drill holes in a HSS 10% cobalt blanks? Gianni -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Refill srl dal 1993, il compatibile

To: 7x12minilathe@... Sent: Sunday, March 04, 2007 2:59 PM Subject: Re: [7x12minilathe] Way Lube, last post I'm still using mobil 1 on the ways, however I have found an additive that makes

Gentlemen, Thanks for the advice. I made two new holders today as prototypes and will make another 4 giving me 8 plus the boring holder and cutoff tool. Given your suggestions, no more often than I

Hi Roy, That's a rather valid (and perceptive) point. I'd never realised the compromises necessary in the spiral scroll design concept. The spiral radius changes between the inner and outer extremes.

future If you're the screwy kinda type! <Big grin> John

Hi, I see lots of interest in cheap digital calipers - presumeably for DRO mods. Not sure if this helps but there are some at

Yup! One of the 14" ones, wielded as a club. Roy wrote:

You don't want to lap the jaws to the scroll. The scroll is actually a helical shape, so you'd find the contact patch with the jaws moves as the jaws travel in & out. All you need to do is remove the

Having been satisfied with my lathe for about three years I have just bought a second one from Homier. They have been out of stock for a very long time but now have a limited stock. The price I paid

Jerry; At this time I have 10 tool holders 4 of which I made myself. Yes you can make them on the mill you will need a 60 deg dove tail cutter. You may not want to buy a large dove tail, one 1/2" dia.

I'm still using mobil 1 on the ways, however I have found an additive that makes them so slick, the tailstock will not lock in place <G> After a bit more testing, it may be offered for sale. Rabid

Hi Rance, If you don't "need" the lathe right away - and wish to save a few $$ you might wish to take a chance and see if the price drops back to the $439. Also note special offers do come and go and

Hi Rance, Thanks for the update! As it turns out, I'm heading over to China in a week or so and will look around a bit - more stuff for the "junk box." Another member posted an offer for an 8-LED item

Thanks Ed, I'll try that when I order (2-3 weeks out). Rance wrote: over item # the catalog" it mentioned. website. were HSH

Hi Rance, Point well-taken. While the picture appears to show the data port door on the 47257-5VGA ($15.99) neither the offer nor the "manual" mention it - I agree with you, best to look elsewhere.

Yes, thanks both! I was thinking along the lines of using a round bar, a dial indicator and a calculator but I guess I might have been making things a bit more complicated than I really needed to.

Rance, Since the lathe is a catalog only item, you need to order it over the phone or on the web. If you go to the HF website and type in item # 44859-0HSH, the site will take you to the lathe for