开云体育

Mark, From the picture it appears you are still using your original scales the same as I have. As I remember the scales can be cut to length. I am still using mine with zero issues since soldering in

Thanks! Sent from [ProtonMail](https://protonmail.com), Swiss-based encrypted email. Sent with [ProtonMail](https://protonmail.com/) secure email.

Hi Phil, Here you go!? The wire connects up to the DRO sensor's ground.? I made sure that there was enough slack in the wire so the joint inside the spade connector doesn't flex and break.? I also

On Sun, 6 Mar 2022, Mark Kimball wrote: > If you can at all afford it, stay away from remote-reading igaging DROs that have aluminum scales. The scale is part of the sensor circuit and has a sliding

Mark, could you post a picture of this ground connection you made? I just got through putting three of those on a Smithy Mill/Lathe combo. Sent from [ProtonMail](https://protonmail.com), Swiss-based

If you can at all afford it, stay away from remote-reading igaging DROs that have aluminum scales.? The scale is part of the sensor circuit and has a sliding ground contact made to it inside the

wrote: I also have the iGaging scales. They are easy to install. You can even install them with magnets if you like. They are as accurate is by cheap Harbor freight dial indicator. But do beware there

I can only elaborate as far as "They Work", iGaging that is. Don't know anything about the glass scales. The iGaging DROs are as accurate as I will probably ever need. And the price is right. Ralph

Can y'all elaborate on the pros and cons of the glass and igaging scales?

I have one of those small Sieg "Micro mills" that Harbor Freight used to sell. Many years ago, I bought and installed iGaging scales on all three axes. I had separate, independent display units for

Here's how I did a DRO Pro's on my 7x mill... http://www.ajawamnet.com/ajawam3/swarf/mill_mods.html May give you some ideas on how I mounted the slides...

If I may intrude… Yes… please.. any pictures or other information would be appreciated. David Robertson

I have been running TouchDRO for at least the past 5 years. It is really fantastic and easy to use. I have a Clausing 8520 mill. [image: IMG_20201017_173656196.jpg] Ralph

I made my X and Y axis DROs from some harbor freight calipers. My Z axis is a 1-inch travel dial indicator that adjusts vertically. Photos are available if you request. I also have some drawings.

Is anyone using Touchdro on a mill? I have a PM-25MV and starting to look at dro's.

Your link requires some modification Michael - California, USA Micro-Mark MicroLux 7x16 LMS 3990 Hi-Torque Mill with power feed Sent: Wednesday, March 2, 2022 1:43 PM To: [email protected]

34 On Sun, Feb 27, 2022 at 4:19 PM, dkwflight<dkwflight@...> wrote: https://www.youtube.com/watch?Carquest Rear rotor YH200513Pv=NVl9WYGGgUQ

May I suggest that under ** CNC, ELS and 3D Printer* topics . . . " you add a reference to the /g/3D-Printing-for-Metal-Hobbyists group?

https://www.youtube.com/watch?v=NVl9WYGGgUQ

Hi Dean This is what I want to my next Christmas, What shall I do? Start saving and get one from China ? Start converting all numbers into metric (or maybe not?) and later have lot of fun? I have most