开云体育

steam4ian <fosterscons@...> wrote: --- In 7x12minilathe@..., "born4something" <ajs@...> wrote: > G'day Gianni & John. Look up the EMBHomebuilders group which is a relative of

G'day John et al. We now know the blood(y) line of this Three Jaw Chick; she of sired by Imprecise, out of True. My wife is a loverly lady (chick) but occasionally she has one jaw too many, a three

wrote: > G'day Gianni & John. Look up the EMBHomebuilders group which is a relative of these machining groups. Its a moderated group but they can't be too fussy, they let me on it! They may be able to

From the bookmarks (Warning, 1.4 mb PDF): http://www.tinaja.com/glib/hackar3.pdf Issue 60 (p. 75-) and 63 (p. 95-) have some good information on do-it-yourself EDM. The circuit pictured in 63 is

Hi again Gianni, One thing I forgot. EDM is usually done in a tank of some dielectric fluid. The fluid is also pumped around to remove the small metal particles from the vicinity of the cutting edge.

Hi Gianni, EDM=Electrical Discharge Machining. I'm no expert on it other than what I've read. Essentially, the metal is removed by a repetitive electrical discharge. Do a google search. In brief,

Hi John It is a plate about ?” thick (6 mm) the hole must be between ? and 5/16 in diameter. What is an EDM equipment? Gianni _____ Da: 7x12minilathe@...

Thank you Clifford Clavin. :) Marty, I just barely got through your post without hitting 'next'. I think I'll just wait for the last post on this subject that just says '________ is the best lube to

Hi Gianni, That stuff's hard. What diameter and how deep? Any access to EDM equipment? John http://www.email.it/f 5000 prodotti in pronta consegna, consegna in 24h, assistenza telefonica da tecnici

Hi folks Does anybody know how to drill holes in a HSS 10% cobalt blanks? Gianni -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Refill srl dal 1993, il compatibile

To: 7x12minilathe@... Sent: Sunday, March 04, 2007 2:59 PM Subject: Re: [7x12minilathe] Way Lube, last post I'm still using mobil 1 on the ways, however I have found an additive that makes

Gentlemen, Thanks for the advice. I made two new holders today as prototypes and will make another 4 giving me 8 plus the boring holder and cutoff tool. Given your suggestions, no more often than I

Hi Roy, That's a rather valid (and perceptive) point. I'd never realised the compromises necessary in the spiral scroll design concept. The spiral radius changes between the inner and outer extremes.

future If you're the screwy kinda type! <Big grin> John

Hi, I see lots of interest in cheap digital calipers - presumeably for DRO mods. Not sure if this helps but there are some at

Yup! One of the 14" ones, wielded as a club. Roy wrote:

You don't want to lap the jaws to the scroll. The scroll is actually a helical shape, so you'd find the contact patch with the jaws moves as the jaws travel in & out. All you need to do is remove the

Having been satisfied with my lathe for about three years I have just bought a second one from Homier. They have been out of stock for a very long time but now have a limited stock. The price I paid

Jerry; At this time I have 10 tool holders 4 of which I made myself. Yes you can make them on the mill you will need a 60 deg dove tail cutter. You may not want to buy a large dove tail, one 1/2" dia.

I'm still using mobil 1 on the ways, however I have found an additive that makes them so slick, the tailstock will not lock in place <G> After a bit more testing, it may be offered for sale. Rabid