开云体育

Thanks for the explanation. Thats very neat. I wonder how they do with backlash due to direction changes. Tom

All light bulbs are fire hazards if not installed as intenedd in fixtures and especially if you cover the bulb. There is no need to resort i using lights are heaters because you can buy a “real”

A good replacement for standard incandescents would be to look into brooder bulbs - used for keeping eggs warm and also for reptiles. A lot of them put out huge amounts of heat, but there are smaller

The only incandescent buthat are tare hard to find now are 100 watt bulbs. 25 W bulbs are available online and in stores everywhere. Mike Taglieri [email protected]> wrote:

I am surprised the Chinese have not made a Digital Travel A Dial. Maybe with a magnetic mount so use it more than one tool. Dave

Chris Albertson, Sorry if I missed the info, but I do not see (can't find) type of lube you use. Be WELL & GOOD LUCK! Mrs. RA - - - - - - - - - - - -

i'm in central gulf coast you use heat, i use cool i keep a little 9 inch desktop fan running 24/7 365 my shop has no environmental controls sometimes it's foggy inside :)

Here in Rust Central, Florida near the ocean, I can make things rust by just looking at them. ?My solution is to wire two 25 W bulbs in ?series, and they give out just enough heat. ?I used 2

I do use tri flow at times but that's it. To be honest I have about 15 differant chemicals that I use at any one point depending on need and how I feel. I have several favorites but still, mostly just

I have some cans of bike chain lube. These are old ones I don’t like to use on my bike but they have other uses. The formulations vary wildly. Some are wax-based some are oil with a solvent mixed on

I started buying WD by the gallons years ago & have several Zep spray bottles laying here & there . I see that Harbor has brought back the re-fillable & pressurize spray bottles

Yea, I admit that wd40 is cheap and does a great job on sanding or generally getting rid of rust. I have better stuff than wd40 but would not use those liberally for general rust removal . A basic can

Besides for cutting aluminum my other use if rust removal on flat surfaces . I have one of those old Black & Decker 1/2 sheet sander I take a scotch pad & spray it liberally with WD40 & then put it on

Yea, it still has its uses. Taking off labels and such, using as a lube? while sanding things and lube for cutting aluminum. Even then I'm suspect if it. Didnt seem to work as I was expecting.

It runs a hard knurled wheel against the lathe way embossing the pattern. This acts like a rack with the knurled wheel as the pinion driving a chain of gears to the dial. A friend has one and it works

there's probably thousands of these out there that have been in use for years . I don't know why they stopped making them in the first place for how popular they are . But in today's world if it ain't

It shows how much one part of a machine has moved relative to another part.? Same thing as a DRO, only purely mechanical Have you ever seen and accidente investigator use one of those wheels that has

I did not the company was alive. Dave

Yes.? It is amazing how the manufacturer fails to show how it works and what it is for. It has a wheel inside (and a lot of gears) such that the wheel runs along a surface on your machine and the

This video is a decent summary https://youtu.be/moIOtHo3oGU