开云体育

I first started using oil and grease later antiseize. I want to try white lead to see how work and found EEZ lead substitute. It work great. It is cleaner than antiseize too. Dave

It's a grease substitute?

davesmith1800 <davesmith1@...> added folder */2) Lubrication Oil and Grease* --- The following files and folders have been updated in the Files area of the [email protected] group. *

FYI. When used it only a coating do not pack chuck. Just use a soldering brush on the geat teeth. I little is all you need. Dave

Here a white lead sub for dead centers and bevel gears in scroll chucks. (Do use on scroll side of chuck 5w or 10w) I used since the 1970's https://www.kbctools.com/itemdetail/1-820-401

This a trick works some times Engaging the haft nuts If lead screw is 16 tpi then can Engage with 16 toi , 32 tpi and 48 tpi without the thread dial. A 1.5tpm lead screw? you can engage without a

Thank you sir ??? animal

I've had the bars, 10mm internal and 10mm external and their inserts for a few (or several) years, and had to look around a bit.? ?Nothing on the packaging. Found the chart below on amazon.? ?I

For me it's much easier to see whats going on when running out of the hole with the cutter on the back side of the hole upside down . SO what is the insert yer using ? What is the range of threads it

If you are working on parts for antique machines, then yes they used all kinds of add threads and you’d never be able to find taps and dies for them all. But any new parts are likely to be metric

Yes, running out the the hole is an excellent technique.? ?Useful to an external thread to a shoulder also, but the blind hole under power .... really necessary. -- Lone Tree, Colorado? ?USA

I have done a lot of single point threading but because I did not have a tap or die in that size. I never had a choice. *If doing blind R/H threading use reverse and start the thread inside so tool

I think I do more single-point threading than tap or die threading.? ? Certainly in larger thread sizes (1/2" and up), and certainly not in small thread sizes (less than 1/4").? ? Projects I do

I found someone interested a color match is a real pain. It is surprising of different colors in cast iron. I like brazing too it does great job and can done with almost sun glasses and a torch. I

There are some Ni based rods that do a reasonable job of color matching cast iron. Success is helped with experience - find a welder who's done it repeatedly. Us mere mortals are more likely to be

This is project I plan to do for a long time A flame eater engine aka candle eater engine. See file section for complete set of drawings Dave

davesmith1800 <davesmith1@...> added folder */1) Projects to make*

After I sold my business I work as Repair Machinist.? You see a lot of attempts at cast iron repair.? JB weld was one best to see , you had take time to remove all JB from casting. This same for bad

This Old Tony has a video about this https://www.youtube.com/watch?v=usRMtTFKpmI <https://www.youtube.com/watch?v=usRMtTFKpmI> It’s not easy. In the past when I”ve had to repair a cast iron piece

As a life long mechanic and also a shop owner, I never ever messed with welding or brazing cast iron. If it needed to be done I took it to a pro. Mickey moused work will always fail. If it's basically