开云体育

Dave, we want to see what you do! Ralph [email protected]> wrote:

Thank you all for information. Looking forward to machining the plexiglass Dave

I've mainly turned optics from plexiglass but have a similar experience to what others have described, see: https://gadgetbuilder.com/OpticalPunch.html#Lucite_Optics

Just a advice. One of you have big experience with Plexiglas: use super sharp tool. I have no experience with plexiglass, however, I have now done a lot of positive cutting with this tool :

nomaly i? use? my? wood? late for? chek? piece? exemple and? the wood? tools? work? very well? on plexiglase test it? on wood? tools jack 47 71

I have machined a lot of plastic.? I favor HSS tools that are VERY sharp. I also keep a diamond hand hone at the ready to further sharpen a bit after grinding, and to touch up the edge from time to

Just plexiglass rod for making game pieces from. First time turning plexiglass All my life has been metals. Any comments Dave

Both my 8" HF grinder and my 6" HF grinder shake badly.? The 8" was mounted on a heavy stand and it still ran across the floor unless I loaded down it down with weight...and that was *after* truing

Thanks for mentioning that.? I had let my sub lapse because I got tired of too many lame projects.? I may re-sub and then hit up the library. Mike

This was discussed in the the HSM Article I referenced. -- Bruce Johnson The less a man knows about how sausages and laws are made, the easier it is to steal his vote and give him botulism.

"If the Reeves drive ever fails on mine, I'd most likely just replace it with a 3 phase motor and VFD." That's apparently what Shopsmith has done for their newest machines, primarily to get a larger

It isn't absolutely necessary to use fluid in an autobalancer.? I've read some build logs that used bearing balls in a grooved disk.? Claimed to work pretty good.? The key to proper operation is to

I bought a cheap (19.95) Harbour Freight 6"grinder that shook badly. I machined new washere and took the armature out and squared up the shoulders that located the washers. Also made new shields from

In the Nov/Dec 2022 issue of Home Shop Machinist, there’s an article about building a fluid-balancing washer assembly to improve grinder vibration. 'Build the Slawsher: A Balancing Ring for Grinding

He some facts on most motors. A 2 speed cooler motor is two motors one is 1725 and the other is 1140 different horse power different torque Industry motors that two speed is one changing the poles

I have the older Consews on my CNC and grinder: https://www.ajawamnet.com/ajawam3/swarf/maxnc.html https://www.ajawamnet.com/ajawam3/swarf/cutter_grinder.html

ok I undestend? now but? it is probaly? low power? about une qaurter? hp pr one? haft? at max I also a astronomer and? we? control? oour? telescope? whit? stepping? moteor? from?

https://www.consew.com/ [email protected]> wrote:

Jacques, Consew motor

sorry? but? wahat? is a Consew motors, motor a new? word? for me jack 47 71