??? ??? Looks like one of the infamous HF big RED mill drill
animal
On 1/22/24 3:15 PM, chrisser via
groups.io wrote:
toggle quoted message
Show quoted text
Dave,
Are
you milling that in a drill press? (from the pic it looks like a
similar model to what I have)
If
so, how you keep the vibrations from loosening the taper and
dropping the chuck?
I
tried to do some basic milling of aluminum with my drill press
with a pretty small end mill and I could't keep the taper from
letting go and dropping the whole chuck onto the workpiece (and
then onto the floor).? I finally gave up.
On Monday, January 22nd, 2024 at
4:03 PM, davesmith1800
<davesmith1@...> wrote:
Here is a easy
way to mill the flat for exstension on mini lathe .
Note the two drill bits in the vise.?
Dave?
Attachments: