开云体育

Fixing an HF 4x6 bandsaw so it will really handle 4x6 material- link to homemadetools.net

Bill in OKC too All Messages By This Member #16079 Jerry Durand posted this mod he did quite some time ago, might be of use to others! https://www.homemadetools.net/forum/hf-bandsaw-fix-so-can-actually-take-6-wide-material-78606#post206024
David Pidwerbecki #16080 Thanks for posting Bill. ? I am hoping that others will post their 4x6 modifications as well. ?? I’m pretty much tapped out on any more mods for my saw. ?I might make some OO blocks to hold square tubing. ? I also might make an auxiliary vice to hold/position small parts.
Carl Hollopeter All Messages By This Member #16081 开云体育 Not sure if the attachments will work, but here is a simple fix that I did that saved many skinned knuckles. ? CarlH ? Thanks for posting Bill.?? I am hoping that others will post their 4x6 modifications as well.?? I’m pretty much tapped out on any more mods for my saw.? I might make some OO blocks to hold square tubing.?? I also might make an auxiliary vice to hold/position small parts. 4x6handle2.jpg 4x6Handle.jpg
markknx All Messages By This Member #16082 开云体育 Sent via the Samsung Galaxy S10+, an AT&T 5G Evolution smartphone Get toggle quoted message Show quoted text From: [email protected] <[email protected]> on behalf of Carl Hollopeter <chollo@...> Sent: Wednesday, June 22, 2022 5:23:35 PM To: [email protected] <[email protected]> Subject: Re: [4x6bandsaw] Fixing an HF 4x6 bandsaw so it will really handle 4x6 material- link to homemadetools.net ? Not sure if the attachments will work, but here is a simple fix that I did that saved many skinned knuckles. ? CarlH ? Thanks for posting Bill.?? I am hoping that others will post their 4x6 modifications as well.?? I’m pretty much tapped out on any more mods for my saw.? I might make some OO blocks to hold square tubing.?? I also might make an auxiliary vice to hold/position small parts. 20150223_141500.jpg 20150213_094434.jpg
David Pidwerbecki #16083 Edited Thanks for posting. ? ?Did you folks use thrust washers on the vise handle to take out the handle slop? I have a bunch of pictures of the mods I did on my saw in the photo section.

Previous Topic Next Topic